ページ1に含まれる内容の要旨
new_180T (E) co Page i Wednesday, December 6, 2000 10:08 AM
SyncMaster 180T
Dual Interface(Analog/Digital)
TFT-LCD Monitor
Owner’s
Instructions
ページ2に含まれる内容の要旨
new_180T (E) co Page ii Wednesday, December 6, 2000 10:08 AM Information in this document is subject to change without notice. © 2000 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishin
ページ3に含まれる内容の要旨
new_180T (E) TOC Page 1 Wednesday, December 6, 2000 10:07 AM Table of Contents Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking Your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setting up your LCD Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
new_180T (E) body Page 2 Wednesday, December 6, 2000 10:08 AM Safety Instructions Before connecting the AC power cord to the DC adapter outlet, make sure the voltage 1 designation of the DC adapter corresponds to the local electrical supply. Never insert anything metallic into the openings in the cabinet of the Liquid Crystal Display 2 (LCD) monitor; doing so may create the danger of electric shock. To avoid electric shock, never touch the inside of the LC
ページ5に含まれる内容の要旨
new_180T (E) body Page 3 Wednesday, December 6, 2000 10:08 AM Unpacking Your LCD Monitor Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. . Power Cord Colorfic & Driver AUT AUTO O EXIT EXIT MENU MENU A B Monitor and Base 15-pin D-Sub Signal Cabel Warranty Card (not available all location) DVI-D Signal Cabel (Optional) DC-Adapter Manual English 3 Italiano Portuguese Deutsch Español Français English
ページ6に含まれる内容の要旨
AUTO MENU new_180T (E) body Page 4 Wednesday, December 6, 2000 10:08 AM Setting up your LCD Monitor Setting up an Ergonomic Workstation Consider the advice given below before you install your monitor. Monitor location Choose a position that exposes you monitor to the least reflection from lights or windows, usually at a right angle to any window. Workstation height Place your LCD Monitor so that the top of the screen is slightly below your eye level when you are comfortably seate
ページ7に含まれる内容の要旨
new_180T (E) body Page 5 Wednesday, December 6, 2000 10:08 AM Setting up your LCD Monitor Connecting Your LCD Monitor This monitor offers a method for connection to both a PC and a workstation. One or both types of signal cables can be connected to the monitor simultaneously. Determine which connection method(s) you need and refer to the instructions below. 2 4 4 3 Figure 3. Cable connections (Analog) Turn off your system and unplug its power cord. 1 Attach the blue signa
ページ8に含まれる内容の要旨
new_180T (E) body Page 6 Wednesday, December 6, 2000 10:08 AM Setting up your LCD Monitor (b) (a) (1) Figure 4. Cable connections (Digital) Turn off your computer and unplug its power cord. 1 Connect the signal cable to the DVI-D connector (1) on the back of your monitor. 2 Connect the other end of the cable to the video port on the back of your workstation. Connect the power cord for your monitor to the power port on the power adapter. 3 Secure the power adapter cord an
ページ9に含まれる内容の要旨
new_180T (E) body Page 7 Wednesday, December 6, 2000 10:08 AM Setting up your LCD Monitor Getting Help If your monitor does not display an image, check your cable connections and refer to “Troubleshooting” on page 17. If you experience difficulties with the quality of the displayed image, run auto adjustment again and refer to “Adjusting Your LCD Monitor” on page 9 or “Troubleshooting” on page 17. Plug and Play ® Our adoption of the new VESA Plug and Play solution elimin
ページ10に含まれる内容の要旨
new_180T (E) body Page 8 Wednesday, December 6, 2000 10:08 AM Setting up your LCD Monitor Self-Test Feature Check (STFC) Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark and the power indicator is blinking, run the monitor self-test by performing the following steps: Turn off both your computer and the monitor. 1 Unplug the vide
ページ11に含まれる内容の要旨
new_180T (E) body Page 9 Wednesday, December 6, 2000 10:08 AM Adjusting Your LCD Monitor User Controls Your LCD Monitor allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the front of the monitor. While you use these buttons to adjust the controls, an OSD shows you their numeric values as the change. 1 3 4 2 5 AUT AUTO O EXIT EXIT MENU MENU A B Figure 6. User c
ページ12に含まれる内容の要旨
new_180T (E) body Page 10 Wednesday, December 6, 2000 10:08 AM Adjusting Your LCD Monitor Automatic Save Whenever you open the OSD and allow an adjustment window to remain active for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made. These changes are saved into a user area in the monitor. User areas are reserved according to the signal frequency from your computer. The monitor can save adjustment
ページ13に含まれる内容の要旨
new_180T (E) body Page 11 Wednesday, December 6, 2000 10:08 AM Adjusting Your LCD Monitor Auto Adjustment Follow these instructions to enable or disable the automatic screen adjustments for your monitor. Auto Adjustment 25 With the menu off, push the EXIT button. The 1 automatic adjustment display appears. Follow the directions previously given on 2 page 7. OSD Lock/Unlock Use this function to secure the current settings, while allowing you to adjust the Brightness and Co
ページ14に含まれる内容の要旨
new_180T (E) body Page 12 Wednesday, December 6, 2000 10:08 AM Adjusting Your LCD Monitor On Screen Display (OSD) Function icons Brightness Function name Setting slidebar 99 Numeric value indicator Figure 7. On Screen Display (OSD) Accessing the Menu System With the menu off, push the MENU button to open the menu system and display the 1 main function menu. Push the “–“ and “+“ buttons to move between the function icons. As you move from 2 one icon to
ページ15に含まれる内容の要旨
new_180T (E) body Page 13 Wednesday, December 6, 2000 10:08 AM Adjusting Your LCD Monitor Table 1. Menu Adjustments Settings and Icon Description Sub-menus Image Lock Image Lock controls adjust for and limit the amount of Fine noise in the video signal which causes horizontal lines Coarse or areas on the screen where the image appears to be unstable and jitters or shimmers. The Fine and Coarse adjustments allow you to more closely adjust your monitor to
ページ16に含まれる内容の要旨
new_180T (E) body Page 14 Wednesday, December 6, 2000 10:08 AM Adjusting Your LCD Monitor Table 1. Menu Adjustments (Continued ) Settings and Icon Description Sub-menus Reset Reset controls return the settings to the factory preset Geometry values for the selected group of functions. Geometry Color changes the Position settings, Image Lock settings and changes the Image Size to Expand 2. Color changes the RGB settings back to their or
ページ17に含まれる内容の要旨
new_180T (E) body Page 15 Wednesday, December 6, 2000 10:08 AM Adjusting Your LCD Monitor Table 1. Menu Adjustments (Continued ) Settings and Icon Description Sub-menus Image Size If your computer or video board supplies a signal rate Normal and addressability lower than 1280 x 1024, this LCD Expanded 1 Monitor provides a scaling processor that can expand Expanded 2 the addressability up to 1280 x 1024. Select the Normal setting to use the normal size viewing
ページ18に含まれる内容の要旨
new_180T (E) body Page 16 Wednesday, December 6, 2000 10:08 AM Appendix PowerSaver This monitor has a built-in power management system called PowerSaver. This system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your
ページ19に含まれる内容の要旨
new_180T (E) body Page 17 Wednesday, December 6, 2000 10:08 AM Appendix Troubleshooting Before calling for service, check the information in this section to see if you can remedy any problems yourself Table 3. Troubleshooting problems Symptom Corrective Actions No Picture Check to see that both the LCD Monitor and the computer are plugged in and turned on. “No Connection, Check the signal cable connection between the computer and the L
ページ20に含まれる内容の要旨
new_180T (E) body Page 18 Wednesday, December 6, 2000 10:08 AM Appendix Table 3. Troubleshooting problems (Continued ) Symptom Corrective Actions White does not look white Adjust the color settings using the OSD COLOR menu. Screen image is not centered or Adjust the Horizontal and Vertical position settings using the OSD. sized properly Check the image size selection (see page 15). Run Auto Adjustment (see page 7). The power indicator blinks amber The L
