ページ1に含まれる内容の要旨
SyncMaster G19P
Install drivers Install programs
ページ2に含まれる内容の要旨
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode. The images here are for reference
ページ3に含まれる内容の要旨
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not bend the plug excessively and wire nor place hea
ページ4に含まれる内容の要旨
Installation Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the monitor.
ページ5に含まれる内容の要旨
Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm/ 4 inchs ) for ventilation p
ページ6に含まれる内容の要旨
Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinner
ページ7に含まれる内容の要旨
could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center . The monitor may malfunction, causing electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cable. This ma
ページ8に含まれる内容の要旨
Do not insert metal objects such as chopsticks, wire and gimlet or inflammable objects such as paper and match into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact a the Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy
ページ9に含まれる内容の要旨
product unplugged. Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing injury or even fatality. When lifting up or moving the monitor, do not lift the monitor upside down while holding only the stand. This may cause your m
ページ10に含まれる内容の要旨
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Without stand Monitor With Stand Monitor & Simple Stand Manual
ページ11に含まれる内容の要旨
Warranty Card User's Guide, Quick Setup Guide (Not available in all Monitor Driver, locations) Natural Color software Cable D-Sub Cable Power Cord Sold separately DVI Cable Front
ページ12に含まれる内容の要旨
Opens the OSD menu. Also use to exit the OSD menu or return to MENU / [ ]button the previous menu. MagicBright™ MagicBright™ is a new feature providing optimum viewing [] environment depending on the contents of the image you are watching. Currently six different modes are available: Custom, Text, Internet, Game, Sport and Movie. Each mode has its own pre-configured brightness value. You can easily select one of six settings by simply pressing MagicBright™ control button. 1)
ページ13に含まれる内容の要旨
(The configuration at the back of the monitor may vary from product to product.) POWER IN Connect the power cord for your monitor to the power port on the back of the monitor. DVI IN Connect the DVI Cable to the DVI IN port on the back of your monitor. Connect the signal cable to the 15-pin, D-sub port on the back of your RGB IN monitor. The Kensington lock is a device used to physically fix the system to Kensington Lock something when using it in a public place. (The locking device
ページ14に含まれる内容の要旨
Connecting the Monitor Connect the power cord for your monitor to the on the back of the monitor. 1. POWER IN Plug the power cord for the monitor into a nearby outlet. 2. Use a connection appropriate for your computer. Using the D-sub (Analog) connector on the video card. 2-1. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] 2-2. Using the DVI (Digital) connector on the video card. Connect the DVI Cable to the DVI IN port on the back of y
ページ15に含まれる内容の要旨
Using the Stand Monitor Assembly Monitor and Bottom Folding the Base The monitor may be reclined -3 to 25 degrees. Attaching a Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad.
ページ16に含まれる内容の要旨
A. Monitor Mounting interface pad (Sold separately) B. 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove screws and then remove the stand from the LCD monitor. 4. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. Installing the Monitor
ページ17に含まれる内容の要旨
4. If you can see following message window, then click the "Continue Anyway" button. ® ® Then click the "OK" button. (Microsoft Windows XP/2000 Operating System) This monitor driver is under certifying MS logo,and this installation dosen't damage your system.The certified driver will be posted on Samsung Monitor homepage http://www.samsung.com/. 5. Monitor driver installation is completed. Installing the Monitor Driver (Manual) Windows XP | Windows 2000 |Windows Me
ページ18に含まれる内容の要旨
3. Click "Display" icon and choose the "Settings" tab then click "Advanced." 4. Click the " " button on the " " tab and select " " tab. Properties Monitor Driver 5. Click "Update Driver." and select "Install from a list or." then click "Next" button. 6. Select "Don't search ,I will" then click "Next" and then click "Have disk".
ページ19に含まれる内容の要旨
7. Click the "Browse" button then choose A:(D:\Driver) and choose your monitor model in the model list and click the " " button. Next 8. If you can see following "Message" window, then click the "Continue Anyway" button. Then click "OK" button. This monitor driver is under certified MS logo,and this installation doesn't damage your system.The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ 9. Click the "Close" button then clic
ページ20に含まれる内容の要旨
10. Monitor driver installation is completed. ® ® Microsoft Windows 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose the "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3. Choose A:(D:\Driver) then click the "Open" button and then click "OK" button. How to install 1. Click "Start," "Setting," and then "Control Panel." 2. Double click the "Display" i
