ページ1に含まれる内容の要旨
PV720A User’s Manual
User’s Manual
PV720A
1
ページ2に含まれる内容の要旨
PV720A User’s Manual Table of Contents 1. Important Safety Instructions 3 2. Introduction 8 3. Recommended Use of the Monitor 14 4. Controls and Adjustments 16 5. Energy Declaration 24 6. Trouble Shooting 25 7. Technical Information 27 8. Product Overview 29 9. Specifications 31 2
ページ3に含まれる内容の要旨
PV720A User’s Manual Important Safety Instructions FCC Statement This equipment has been tested to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio c
ページ4に含まれる内容の要旨
PV720A User’s Manual TCO'99 TCO99 compliant monitors must be compliant with TCO99 which is more stringent than MPRII. The purchase of TCO99 compliant monitors contributes to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environmentally labelled computers? In many countries, environmental labelling has become an established method-for encouraging the adaptation of goods and services to the e
ページ5に含まれる内容の要旨
PV720A User’s Manual The energy requirements include a demand that the computer and/or display, after a certain period of inactivity, shall reduce its power consumption to a lower level in one or more stages. The length of time to reactivate the computer shall be reasonable for the user. Labelled products must meet strict environmental demands, for example, in respect of the reduction of electric and magnetic fields, physical and visual ergonomics and good usability. Below you will fin
ページ6に含まれる内容の要旨
PV720A User’s Manual Cadmium** Cadmium is present in rechargeable batteries and in the colour-generating layers of certain computer displays. Cadmium damages the nervous system and is toxic in high doses. The relevant TCO'99 requirement states that batteries, the colour-generating layers of display screens and the electrical or electronics components must not contain any cadmium. Mercury** Mercury is sometimes found in batteries, relays and switches. It damages the nervous system a
ページ7に含まれる内容の要旨
PV720A User’s Manual 2. Do not place your LCD Monitor near a window. Exposing the Monitor to rain, water, moisture or sunlight can severely damage it. 3. Do not place anything on top of the Monitor/PC signal cord. Make sure the cord is placed in an area where it will not be stepped on. 4. Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the display. 5. Do not remove the cover or attempt to service this unit by yourself. You may void the warra
ページ8に含まれる内容の要旨
PV720A User’s Manual Introduction Product Description Congratulations on purchasing this new generation monitor. Your LCD monitor incorporates high quality display into a small lightweight module. It has power- saving capabilities and emits no X-ray radiation. The features are: • 17" TFT Liquid Crystal Display • Compatible with IBM VGA, VESA • Direct RGB input • SXGA 1280x1024 resolution • Lightweight compact design, weighing less than 7.5Kg • DPMS (power saving) • Univer
ページ9に含まれる内容の要旨
PV720A User’s Manual User's Guide / Driver CD Power Cord Power Adapter D-Sub 15 VGA Signal Cable 3.5 mm Audio Cable Speaker Box CAUTION Keep the shipping carton in case the need arises to store or transport the unit. Let the LCD lie on its face when you put it into the carton. 9
ページ10に含まれる内容の要旨
PV720A User’s Manual Installation & Remove 1-1. Installing the Portrait 1-2. Remove the Portrait 10
ページ11に含まれる内容の要旨
PV720A User’s Manual 2-1. Rotating to the mode "Portrait" (vertical orientation) 3-1. Installing VESA-compliant Connecting Device* This product provides square screw holes that conform to 100mm*100mm VESA-compliant connection interface. 11
ページ12に含まれる内容の要旨
PV720A User’s Manual 3-2. Remove VESA-compliant Connecting Device* *User should prepare the connection device for VESA themselves. 4-1. Speaker Box Install Cabling for Your Display 1. Turn off the power of your computer and other devices. 2. Connect (1) the video signal cable of the monitor to the 15-pin connector of the video port in your computer. 3. With the monitor switched off, attach (2) the power cord to the monitor and then to a grounded power outlet. 12
ページ13に含まれる内容の要旨
PV720A User’s Manual 4. Connect your audio cable one end to the external speaker, through the connector of audio input on the rear part; the other end to audio device (such like connector of the sound card in the PC). 5. Connect to the earphone plug-in if you need this device. 6. Turn on the monitor and computer. 7. If necessary, adjust the front panel controls according to your personal preference. 13
ページ14に含まれる内容の要旨
PV720A User’s Manual Recommended Use of the Monitor Power Use the type of power indicated on the marking label. Plugs Do not remove any of the prongs of the monitor's three-pronged power plug. Disconnect the power plug from the AC outlet if you are not going to use it for an indefinite period of time. Power cords Use the proper power cord with correct attachment plug type. If the power source is 120 V AC, use a power cord that has UL and CSA approvals. If the power
ページ15に含まれる内容の要旨
PV720A User’s Manual Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. Environment Place the monitor on a flat level surface. Place the monitor in a well-ventilated place. Keep the monitor away from: rain or water overly hot, cold or humid places sunlight dusty surroundings equipment that generates strong magnetic fields. 15
ページ16に含まれる内容の要旨
PV720A User’s Manual Controls and Adjustments Once you have installed this monitor with your system, please read the instructions in this section, they give you some guidelines on how to use the monitor more efficiently. And lead you through the various functions of the user controls and explain how to adjust the monitor to your personal preference. Front User Controls 16
ページ17に含まれる内容の要旨
PV720A User’s Manual (1) Enter " " button To display the OSD manual and select functions. (2) Down " " button To adjust the selected OSD function or the brightness directly. (3) Up " " button To adjust the selected OSD function or the contrast directly. (4) "ESC" button To close the OSD manual and to escape function. (5) Power LED Indicator As long as the monitor is powered, this indicator is lit. In normal operation, it lights green. While in power saving mode, the indicator
ページ18に含まれる内容の要旨
PV720A User’s Manual On Screen Display (OSD) Main menu 1. Press " " to open the OSD main menu. 2. Use the " " and " " arrows to move through the displayed functions. 3. Press " " to confirm your selected function. Brightness Press the " " button to enter the brightness, and press the " " or " " button to increase or decrease the brightness level, then press " ESC" button to exit. Contrast Press the " " button to enter the contrast, and press the " " or " " button to increase
ページ19に含まれる内容の要旨
PV720A User’s Manual 1. Volume Tuning Normal Mode Press " " to enter "Volume", and press " " or " " to adjust the volume. Power Saving Mode (when power indication lights amber) a. Mute Hot Key (when playing music) Press "ESC" to enter Mute Mode, and press "ESC" again will return to sound playing mode. b. Control the volume In Power Saving Mode, press " " or " " to enter the volume tuning window, and press " " or " " key to adjust the volume. After 6 seconds, the volume tuning
ページ20に含まれる内容の要旨
PV720A User’s Manual 2. Auto Tune Press " " button, the system will automatically adjust the clock, phase, H-position and V-position values for optimal settings. ADVANCE AUTO TUNE PATTERN PROGRAM USING GUIDE • As some VGA Card doesn't match the VESA standard. It can't out-put 0.7 V p-p VESA standard. Therefore, we need "ADVANCE AUTO TUNE PATTERN PROGRAM" to modify the parameters of monitor to match different output level of VGA card. • Win_pat.exe (This file includes in the folder
