ページ1に含まれる内容の要旨
305495-001.book Page i Tuesday, August 20, 2002 8:21 AM
User’s Guide
2025 Flat Panel Monitor
Document Part Number: 305495-001
August 2002
ページ2に含まれる内容の要旨
305495-001.book Page ii Tuesday, August 20, 2002 8:21 AM © 2002 Hewlett-Packard Company All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this document is provided “as is” without warranty of any kind, includi
ページ3に含まれる内容の要旨
305495-001.book Page iii Tuesday, August 20, 2002 8:21 AM Contents 2025 Flat Panel Display Product Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 Information Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Setting Up the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3 Selecting the Signal Connectors and Cables . . . . . . . 1–6 Removing the Monitor Base . . . . . . . . . . . . . . . . . . . 1–7 Mounting the Monitor . . . . .
ページ4に含まれる内容の要旨
305495-001.book Page iv Tuesday, August 20, 2002 8:21 AM Declaration of Conformity for Products Marked with FCC Logo, United States Only. . . . . . . . . . . . . . . . . . . . . . . . A–24 Canadian Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . A–25 Avis Canadien . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–25 European Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . A–25 Japanese Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–26 EPA
ページ5に含まれる内容の要旨
305495-001.book Page 1 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display Product Features The 2025 Flat Panel Display has an active matrix, thin-film transistor (TFT), liquid crystal display (LCD). The monitor features include: ■ Large 20.1-inch (51 cm) viewable area display. ■ 1600 × 1200 resolution, plus full-screen support for lower resolutions. ■ Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side. ■ Tilt and swivel adjustment capabil
ページ6に含まれる内容の要旨
305495-001.book Page 2 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display ■ Software and Reference Library CD includes an information file (INF), Image Color Matching file (ICM), and product documentation. ■ Energy Saver feature for Energy Star compliance. ■ AssetControl ■ Compliant with the following regulated specifications: ❏ EPA ENERGY STAR ❏ European Union CE Directives ❏ Swedish MPR II 1990 ❏ Swedish TCO '99 Information Files The CD-ROM included with this monitor contains two
ページ7に含まれる内容の要旨
305495-001.book Page 3 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow these steps: 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect the monitor signal cable to the video connector on the rear panel of the computer. The DVI-D cable supplied with this monitor is for ✎ digital-to-digi
ページ8に含まれる内容の要旨
305495-001.book Page 4 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display 6. Adjust the monitor as needed for your comfort using the monitor’s tilt, swivel, and height adjustment capabilities. 4 User’s Guide
ページ9に含まれる内容の要旨
305495-001.book Page 5 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display User’s Guide 5
ページ10に含まれる内容の要旨
305495-001.book Page 6 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display WARNING: To reduce the risk of electric shock or damage to your Å equipment: Do not disable the power cord grounding plug. The grounding plug is an important safety feature. Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. Disconnect power from the monitor by unplugging the power cord from the electrical outlet. Do not place anything on power cords or cabl
ページ11に含まれる内容の要旨
305495-001.book Page 7 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display Removing the Monitor Base Before you can mount the monitor onto a swing arm or other mounting fixture, you must remove the monitor from the base. CAUTION: Before beginning to disassemble the monitor, be sure Ä the monitor is turned off and the power and signal cables are both disconnected. To remove the monitor from the base: CAUTION: Lay the front bezel down on a soft area to prevent it from Ä getting scratc
ページ12に含まれる内容の要旨
305495-001.book Page 8 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display 2. Remove the four screws as shown in the following illustration. CAUTION: Ensure that the bottom of the monitor base is positioned Ä over a table or desktop before removing the base from the monitor. 3. Remove the monitor base from the monitor. 8 User’s Guide
ページ13に含まれる内容の要旨
305495-001.book Page 9 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display Mounting the Monitor 1. Remove the monitor base. Refer to “Removing the Monitor Base” steps in the previous section. When the base is removed, four threaded mounting holes are exposed on the monitor panel to be used for mounting purposes. These mounting holes are spaced 100 mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel displays. 2. Mount t
ページ14に含まれる内容の要旨
305495-001.book Page 10 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display Operating the Monitor Front Panel Controls Icon Function No. Control 1 Pip Pip button Activates Picture in Picture (Pip) window 2 Signal Input LEDs PC LED activates when VGA or DVI-I is displayed; video LED activates when super video or composite video is displayed 3 INPUT Signal Input Signal input selection - scrolls through button VGA, DVI-I, super video, and composite video inputs 4 AUTO AUTO button Auto
ページ15に含まれる内容の要旨
305495-001.book Page 11 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display Front Panel Controls Icon Function No. Control 5 1,2 OSD Adjusts Selects VGA (Input 1) or DVI-I (Input 2) when OSD is Off 6 Selects and adjusts the OSD Menu settings 7 Brightness icon Indicates brightness controls, which are used to adjusts the screen brightness. 8 OSD Adjusts Selects and adjusts the OSD Menu settings, and adjusts brightness when the OSD is off. 9 Menu Opens the OSD and activates the menu
ページ16に含まれる内容の要旨
305495-001.book Page 12 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display On-Screen Display Settings The adjustments for screen settings are located in the on-screen display (OSD). Press the OK button on the monitor's front panel to view the OSD menu in one of six available languages. The following table shows the menus and their functions at each level: OSD Menu Levels Menu Level Menu Level Menu Level Menu Level 1 2 3 4 Adjust Position Horizontal Vertical Adjust Size Full Screen N
ページ17に含まれる内容の要旨
305495-001.book Page 13 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display OSD Menu Levels Menu Level Menu Level Menu Level Menu Level 1 2 3 4 OSD Setting Horizontal Vertical Product Serial No. Information Resolution Video Input Input Selection Analog (D-Sub) Analog (DVI) Digital (DVI) CVBS S-Video Picture in Picture Size On/Off Small Medium Large Position Horizontal Vertical Reset to Factory Setting Exit Main Controls User’s Guide 13
ページ18に含まれる内容の要旨
305495-001.book Page 14 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display The Video Noise OSD selection is not available when the monitor ✎ is operating in the DVI-D (digital ) mode. Adjusting Monitor Settings On the front controls of your monitor, once you press the OK button, the On Screen Display (OSD) Main Controls window will pop up and you can now start making adjustments to your monitor’s various features. Use the left, right, up, and down arrow keys to make your adjustment
ページ19に含まれる内容の要旨
305495-001.book Page 15 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display ■ Entering sleep mode—Indicates the screen display is entering a sleep mode. ■ No video input—Indicates the video cable may not be plugged into the computer or the computer may not be turned on. Adjusting Screen Quality Allow the monitor to warm up for 20 minutes before performing the following procedures. The Auto Adjustment feature automatically fine-tunes the image quality each time a new video mode is u
ページ20に含まれる内容の要旨
305495-001.book Page 16 Tuesday, August 20, 2002 8:21 AM 2025 Flat Panel Display The Clock must first be set correctly since the Clock Phase ✎ settings are dependent on the main Clock setting. When using the controls, you will obtain the best results by using the adjustment pattern provided on the CD-ROM. When adjusting the Clock and Clock Phase values, if the monitor images become distorted, continue adjusting the values until the distortion disappears. To restore the factory settings, s
