ページ1に含まれる内容の要旨
User Guide
HP L5006tm 15” Touchscreen Monitor
Document Part Number: 419998-001
May 2006
This guide provides information on setting up the monitor,
installing drivers, using the on-screen display menu,
troubleshooting and technical specifications.
Enhanced for Accessibility
ページ2に含まれる内容の要旨
© Copyright 2006 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, MS-DOS, Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and other countries. Adobe, Acrobat, and Acrobat Reader are trademarks or registered trademarks of Adobe Systems Incorporated. Elo TouchSystems, IntelliTouch and TouchTools are trademarks of Tyco Electronics Corporation. The only warranties for HP products and service
ページ3に含まれる内容の要旨
Contents 1 Product Features 2 Safety and Maintenance Guidelines Important Safety Information. . . . . . . . . . . . . . . . . . . . . . 2–1 Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 Cleaning the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . 2–3 Shipping the Monitor. . . . . . . . . . . . . . . . . . . . . . . . . 2–4 3 Setting Up the Monitor Identifying Rear Connectors . . . . . . . . . . . . . . . . . . . . . . 3–1 Connecting the Monitor
ページ4に含まれる内容の要旨
Contents Adjusting the Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–3 Identifying Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4–4 Using the On-Screen Display. . . . . . . . . . . . . . . . . . . . . . 4–4 OSD Menu Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5 Identifying Monitor Conditions . . . . . . . . . . . . . . . . . . . . 4–7 Power Management System. . . . . . . . . . . . . . . . . . . . . . . 4–8 A Troubleshooting Solving C
ページ5に含まれる内容の要旨
1 Product Features The 15-inch flat panel monitor has an active matrix thin-film transistor (TFT) liquid crystal display (LCD) to provide superior display performance. The monitor features include: ■ Maximum resolution of XGA 1024 x 768. Compatible with VGA, SVGA and XGA (non-interlace) color video cards. ■ Integrated IntelliTouch touchscreen technology from the Elo TouchSystems division of Tyco Electronics Corporation. ■ Sealed touchscreen responds to touch with finger or gloved h
ページ6に含まれる内容の要旨
Product Features ■ Compliant with Swedish MPR II 1990 regulated specifications. 1–2 User Guide
ページ7に含まれる内容の要旨
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with your monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with your monitor, refer to the “Power Cord Set Requirements” section in Appendix C. WARNING: To reduce the risk of electric shock or damage to your Å equipment, do not disable the power cord grounding feature. This equipment is des
ページ8に含まれる内容の要旨
Safety and Maintenance Guidelines CAUTION: For the protection of your monitor, as well as your Ä computer, connect all power cords for your computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS). Not all power strips provide surge protection; the power strips must be specifically labeled as having this ability. Use a power strip whose manufacturer offers a Damage Replacem
ページ9に含まれる内容の要旨
Safety and Maintenance Guidelines ■ Slots and openings in the cabinet are provided for ventilation. These openings must not be blocked or covered. Never push objects of any kind into cabinet slots or other openings. ■ Do not drop your monitor or place it on an unstable surface. ■ Do not allow anything to rest on the power cord. Do not walk on the cord. ■ Keep your monitor in a well-ventilated area, away from excessive light, heat or moisture. ■ When removing the monitor base, you m
ページ10に含まれる内容の要旨
Safety and Maintenance Guidelines Shipping the Monitor Keep the original packing box in a storage area. You may need it later if you move or ship your monitor. 2–4 User Guide
ページ11に含まれる内容の要旨
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions. Identifying Rear Connectors Connector Function 1 AC Power Connects the AC power cord to the monitor. 2 USB Connects the touchscreen USB cable to the monitor. 3 Serial Connects the touchscreen serial cable to the monitor. 4 VGA Connects the video cable to the monitor. User Guide 3–1
ページ12に含まれる内容の要旨
Setting Up the Monitor Connecting the Monitor 1. Place the monitor in a convenient, well-ventilated location near the computer. WARNING: To reduce the risk of electric shock or damage to your Å equipment: ■ Do not disable the power cord grounding plug. The grounding plug is an important safety feature. ■ Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times. ■ Disconnect power from the monitor by unplugging the power cord from the el
ページ13に含まれる内容の要旨
Setting Up the Monitor Connecting the Power, USB or Serial and VGA Cables Connect either the USB or serial cable to the monitor, but not ✎ both. 5. Turn on the computer, then press the power button on the side panel to turn the monitor power on. Installing the Touch Driver Software Downloading Drivers from the Web 1. Insert the HP software and documentation CD in the computer’s CD-ROM drive. The CD will run automatically and open to a menu screen. 2. From the menu screen, select Elo
ページ14に含まれる内容の要旨
Setting Up the Monitor Depending on whether you connected the USB cable or serial ✎ cable, you should install only the USB driver or serial driver. 6. Refer to the online help file with the software for instructions on configuring and adjusting the touchscreen. Installing Drivers from the CD 1. Insert the HP software and documentation CD in the computer’s CD-ROM drive. The CD will run automatically and open to a menu screen. 2. From the menu screen, select Elo TouchSystems TouchTools.
ページ15に含まれる内容の要旨
Setting Up the Monitor CAUTION: This monitor supports the VESA industry standard 75mm Ä mounting holes. To attach a third party mounting solution to the monitor, four 4mm, 0.7 pitch, and 10mm long screws are required (not provided with the monitor). Longer screws should not be used because they may damage the monitor. It is important to verify that the manufacturer’s mounting solution is compliant with the VESA standard and is rated to support the weight of the monitor display panel. For
ページ16に含まれる内容の要旨
Setting Up the Monitor 3. Position the monitor on the desk or tabletop. 4. Lift the bezel cover from the base of the stand. 5. Install the screws into the holes provided and replace the bezel cover. 6. Reconnect the monitor cables and turn it on. Tilting the Monitor For viewing clarity, tilt the monitor forward (up to -5 degrees) or backward (up to 90 degrees). Tilting the Monitor CAUTION: In order to protect the monitor, be sure to hold the base Ä when adjusting the LCD, and take ca
ページ17に含まれる内容の要旨
Setting Up the Monitor Locating the Rating Labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about your monitor model. The rating labels are located on the rear panel of the monitor display head. User Guide 3–7
ページ18に含まれる内容の要旨
4 Operating the Monitor Installing the Monitor Driver The CD that comes with the monitor contains monitor driver files you can install on your computer: ■ an .INF (Information) file ■ an .ICM (Image Color Matching) file Adobe Reader is supplied on this CD and can be installed from the menu. If the monitor does not include a CD, the .INF and .ICM files can ✎ be downloaded from the HP monitors support Web site. See “Downloading from the Worldwide Web” in this chapter. The Information
ページ19に含まれる内容の要旨
Operating the Monitor The Image Color Matching File The .ICM files are data files that are used in conjunction with graphics programs to provide consistent color matching from monitor screen to printer, or from scanner to monitor screen. The .ICM file contains a monitor color system profile. This file is activated from within graphics programs that support this feature. The ICM color profile is written in accordance with the ✎ International Color Consortium (ICC) Profile Format specifi
ページ20に含まれる内容の要旨
Operating the Monitor You may need to install the digitally signed monitor .INF and ✎ .ICM files manually from the CD in the event of an installation error. Refer to the Monitor Driver Software Readme file on the CD. Downloading from the Worldwide Web To download the latest version of .INF and .ICM files from the HP monitors support Web site: 1. Refer to http://www.hp.com/support and select your country region. 2. Follow the links for your monitor to the support page and download pag
