ページ1に含まれる内容の要旨
HP w19 LCD Monitor User's Guide
• Preface
• Safety and Maintenance Guidelines
• Setup
• Using the Monitor
• Drivers and Auto-Adjustment
• Technical Support FAQ
• Specifications
• LCD Monitor Quality and Pixel Policy
• Agency Regulatory Notices
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for
ページ2に含まれる内容の要旨
Back to Contents Page Preface: HP w19 LCD Monitor About This Guide • Notational Conventions About This Guide This guide is intended for anyone who uses the HP w19 LCD Monitor. It describes the monitor's features, setup, and operation. The sections are as follows: • Safety and Maintenance Guidelines • Setup • Using the Monitor • Drivers and Auto-Adjustment • Technical Support FAQ • Specifications • LCD Monitor Quality and Pixel Policy • Agency Regulatory Notices Notational Co
ページ3に含まれる内容の要旨
Back to Contents Page Safety and Maintenance Guidelines: HP w19 LCD Monitor Important Safety Information Safety Precautions Maintenance Guidelines Cleaning the Monitor Important Safety Information The power cord is designed for use with your monitor. To use a different cord, use only a power source and connection compatible with this monitor. For information on the correct power cord set to use with your monitor, see Power Cord Set Requirements. WARNING: To reduce the risk o
ページ4に含まれる内容の要旨
Maintenance Guidelines To enhance the performance and extend the life of your monitor: • Do not open your monitor cabinet or attempt to service this product yourself. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider. • Adjust only those controls that are described in the operating instructions. • Turn your monitor off when not in use. You can substantially increase the life expectancy of your monito
ページ5に含まれる内容の要旨
Back to Contents Page Setup: HP w19 LCD Monitor • Base • Attaching the Cables • Attaching Wall Mounting Arm Back to Contents Page Base: HP w19 LCD Monitor Base Attaching the Base Removing the Base Base • For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor's angle to your own preference. • Hold the stand so you do not topple the monitor when you change the monitor's angle. • You are able to adjust the monitor's angle. NOTE
ページ6に含まれる内容の要旨
Attaching the Base 1 Turn off the monitor and unplug it from the electrical outlet. 2 Place the base on a flat work surface. 3 Align the tabs on the base with the corresponding slots on the bottom of the monitor. NOTE: • The base will align with the monitor slots in only one position. • The color of the cabinet may vary. • Outline for reference only.
ページ7に含まれる内容の要旨
Removing the Base 1 Place the monitor upside-down on a stable, flat work surface. 2 Push release latch on the bottom of the rear cabinet, and push the base toward the back of the monitor at the same time and lift up to remove the base. NOTE: • The color of the cabinet may vary. • Outline for reference only. CAUTION: Be careful to avoid pinching or scraping fingers when removing the base.
ページ8に含まれる内容の要旨
Back to Contents Page Attaching the Cables: HP w19 LCD Monitor Cable Connections On Back of Monitor and Computer Turn off your computer before performing the procedure below. 1 Connect the power adapter DC cable to the DC-In port on the back of the monitor. 2 Connect one end of the 15-pin D-Sub (VGA) cable to the back of the monitor and connect the other end to the computer’s D-Sub port. 3 Plug the power cable of your monitor into a nearby outlet. Plug the other end of the power
ページ9に含まれる内容の要旨
Back to Contents Page Attaching Wall Mounting Arm: HP w19 LCD Monitor Preparing to Install An Optional Wall Mounting Arm (Not supplied) Installing an Optional Wall Mounting Arm (Not supplied) Preparing to Install An Optional Wall Mounting Arm (Not supplied) This monitor can be attached to a wall mounting arm you purchase separately. Disconnect power before this procedure. Follow these steps: 1 Set the monitor screen down on a flat, soft, protected surface. 2 Support the base and
ページ10に含まれる内容の要旨
Installing an Optional Wall Mounting Arm (Not supplied) Follow these steps to finish installing a wall mounting arm (not included): 1 Set the monitor screen down on a flat, soft, protected surface. 2 Place the wall mounting arm onto the back of the monitor. Line up the holes of the arm with the holes in the back of the monitor. 3 Insert the 4 screws into the holes and tighten. 4 Reconnect the cables. Refer to the user's manual that came with the optional wall mounting arm for instruct
ページ11に含まれる内容の要旨
Back to Contents Page Using the Monitor: HP w19 LCD Monitor • Setting the Optimal Resolution • Controls and Indicators Back to Contents Page Setting the Optimal Resolution: HP w19 LCD Monitor The recommended resolution for this monitor is 1440 by 900. To setup the monitor to this resolution, follow the steps below. 1 Click START. 2 Click SETTINGS. 3 Click CONTROL PANEL. 4 Double click DISPLAY. 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1440 by 900. NOTE: If 14
ページ12に含まれる内容の要旨
Back to Contents Page Controls: HP w19 LCD Monitor Operating Instructions External Controls OSD Lock Function How to Adjust a Setting Adjusting the Picture LED Indicators Operating Instructions Press the power button (E) to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video c
ページ13に含まれる内容の要旨
Adjusting the Picture Main Menu Item Main Menu Sub Menu Item Sub Menu Description Icon Icon Luminance Contrast Contrast from digital-register Brightness Backlight adjustment Image Setup Focus Adjust picture phase to reduce horizontal-line noise Clock Adjust picture clock to reduce vertical-line noise Image Position H. Position Adjust the horizontal position of the picture V. Position Adjust the vertical position of the picture Color Temp. Warm N/A Recall warm color t
ページ14に含まれる内容の要旨
LED Indicators Status LED Color Full Power Mode Green Active-off Mode Red See Technical Support FAQ for more information. Back to Contents Page Installing Drivers and Using the Auto-Adjustment Feature: HP w19 LCD Monitor Downloading from the World Wide Web To download the latest version of INF and ICM files from the HP Support Web site: 1 Refer to: http://www.hp.com/support 2 Select your country/region. 3 Select Download Drivers and Software. 4 Enter the model number
ページ15に含まれる内容の要旨
Back to Contents Page Technical Support FAQ: HP w19 LCD Monitor Technical Support FAQ (Frequently Asked Questions) Problem & Question Possible Solutions Power LED is not on • Make sure the power button is on and the power cord is properly connected to a grounded power outlet and to the monitor. No Plug & Play • In order for the Plug & Play feature of the monitor to work, you need a Plug & Play compatible computer and video card. Check with your computer manufacturer. Also check the
ページ16に含まれる内容の要旨
Back to Contents Page Specifications: HP w19 LCD Monitor General LCD Panel (19") Resolution Preset Display Modes Environmental Physical Characteristics Power Cord Set Requirements Pin Assignments Plug and Play DDC2B Feature All specifications represent the typical specifications provided by HP’s component manufacturers; actual performance may vary either higher or lower. General Model number HP w19 LCD Panel (19") Driving system TFT Color LCD Size 48cm(19.0") Pix
ページ17に含まれる内容の要旨
Preset Display Modes Standard Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Dos-mode 720 x 400 31.47 70.0 VGA 640 x 480 31.47 60.0 VGA 640 x 480 37.50 75.0 SVGA 800 x 600 37.879 60.0 SVGA 800 x 600 46.875 75.0 XGA 1024 x 768 48.363 60.0 XGA 1024 x 768 56.476 70.0 XGA 1024 x 768 60.02 75.0 SXGA 1280 x 1024 64.00 60.0 SXGA 1280 x 1024 80.00 75.0 WXGA+ 1440 x 900 55.935 59.8 Physical Characteristics Connector Type 15-pin Mini D-Sub & DVI-D Signal Cable Type Detach
ページ18に含まれる内容の要旨
Power Cord Set Requirements The monitor power supply is provided with automatic line switching (ALS). This feature allows the monitor to operate on input voltages between 100–120V or 200–240V. The power cord set (flexible cord or wall plug) received with the monitor meets the requirements for use in the country/region where you purchased the equipment. If you need to obtain a power cord for a different country/region, you should purchase a power cord that is approved for use in that co
ページ19に含まれる内容の要旨
Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2– 9 TMDS Data 1– 17 TMDS Data 0– 2 TMDS Data 2+ 10 TMDS Data 1+ 18 TMDS Data 0+ 3 TMDS Data 2/4 Shield 11 TMDS Data 1/3 Shield 19 TMDS Data 0/5 Shield 4 TMDS Data 4– 12 TMDS Data 3– 20 TMDS Data 5– 5 TMDS Data 4+ 13 TMDS Data 3+ 21 TMDS Data 5+ 6 DDC Clock 14 +5V Power 22 TMDS Clock Shield 7 DDC Data 15 Ground (for +5V) 23 TMDS Clock+ 8 N.C. 16 Hot Plug Detect 24 TMDS Clock– Plug and Play DDC2B Feature Plug &
ページ20に含まれる内容の要旨
Back to Contents Page Agency Regulatory Notices: HP w19 LCD Monitor Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the i
