ページ1に含まれる内容の要旨
Marshall Electronics
9
Alternate Menu Functions
1910 East Maple Ave.
Menu is shown by holding down ALT and then pressing the
El Segundo, CA 90245
MENU button. (ALT+MENU). Function selection and cursor
Tel.: 800-800-6608 • Fax: 310-333-0688
movement is performed with the source selection buttons.
www.LCDRacks.com
Email: sales@lcdracks.com
CH1 - ID Input 5 character
label for each source
CH2 - Date/Time Setup
CH3 - Sequence (Off to30 Second) Changes displayed image at programmed
ページ2に含まれる内容の要旨
MODE adjustment does not function 1 Product Overview The V-RD151P-4 is space saving monitor in a drawer with a high-resolution 1024 × 768 pixel 15” display. This model also features a Quad Split and Sequential Switcher for composite video signals. The Quad Split feature allows any mix of the four composite video channels to appear on the monitor as real time picture- RESET - resets the monitor to factory defaults. in-picture images. For added flexibility, this unit can accommodate composi
ページ3に含まれる内容の要旨
3. After inspection, attach adjustable rear support brackets using the supplied thumbscrews and install the V-RD151-4 in your desired location of a standard EIA 19-inch equipment rack. Adequate ventilation is required when installed to prevent possible damage to the internal components. Thumbscrews and Attached bracket rear support bracket 4. Connect required cables for signal input and output. Note: All BNC connectors should be rated for 75Ω. Note: Power must be applied to the V-RD15
ページ4に含まれる内容の要旨
7 Switch Settings and Indicators Drawer close interlock micro-switch places monitor into standby mode when in stored position AB * NOTE: Digital Process Control is not available in PC ANALOG or S-VIDEO modes A. Digital Process Controls (DPC)-not available in PC or S-Video Modes Quad - 4 channels displayed simultaneously on the screen. PIP - Picture in Picture menu selected display of 2 to 4 channels. Zoom - expands a selected portion of the display Freeze - of full screen image S
