ページ1に含まれる内容の要旨
MultiSync P1150
User’s Manual
ページ2に含まれる内容の要旨
Declaration of the Importer We hereby certify that the color monitor MultiSync P1150 JC-2145UMB are in compliance with Council Directive 73/23/EEC: - EN 60950 Council Directive 89/336/EEC: - EN 55022 - EN 60555-2 - EN 60555-3 - EN 50082-1 (IEC 801-2) (IEC 801-3) (IEC 801-4) and marked with NEC Europe Ltd. Ismaning Office Steinheilstraße 4-6 D-85737 Ismaning, Germany
ページ3に含まれる内容の要旨
Safety Instruction Caution: When operating the JC-2145UMB with a 220-240V AC power source in Europe except UK, use the power cord provided with the monitor. In UK, a BS approved power cord with moulded plug has a Black (five Amps) fuse installed for use with this equipment. If a power cord is not supplied with this equipment please contact your supplier. When operating the JC-2145UMR with a 220-240V AC Power source in Australia, use the power cord provided with the monitor. For all other cases,
ページ4に含まれる内容の要旨
English Deutsch Français Español Italiano Appendix
ページ5に含まれる内容の要旨
English
ページ6に含まれる内容の要旨
Introduction E - 1 Introduction Congratulations on your purchase of the MultiSync P1150 colour Monitor! The MultiSync P1150 monitor includes the aperture grille CRT, Microsoft’s Plug and Play, NEC’s ErgoDesign properties, the On Screen Manager (OSM), as well as all the unique features you expect from MultiSync Monitors. The MultiSync technology provides you with automatic compatibility with multiple operating platforms and a vast array of graphics standards allowing resolution upgrades without u
ページ7に含まれる内容の要旨
E - 2 Introduction Plug and Play Plug and Play is the new Microsoft® solution with Windows® 95 to provide automatic peripheral connections without confusing and time-consuming setup. When used with a Plug and Play compatible system and video card, the MultiSync P1150 monitor automatically tells the system its identification and capabilities. The system will then select its highest resolution and refresh rate to take advantage of your MultiSync monitor. BNC/D-SUB Selection Up-front BNC/D-SUB Sele
ページ8に含まれる内容の要旨
Introduction E - 3 MultiSync monitors comply with these standards by offering IPM System power management and Reduced Magnetic Field technology. Power Manager IPM (Intelligent Power Manager) System is an innovative power-saving utility that complies with both the EPA’s Energy Star requirements and Europe’s TCO NUTEK’s power management requirements. Energy Star products use less than 30 watts when in the main power saving mode. The NUTEK specification 803299 requires automatic power down to less
ページ9に含まれる内容の要旨
E - 4 Introduction Reduced Emissions The P1150 monitor incorporates Reduced Magnetic Field technology designed to reduce magnetic and alternating electric field emissions and static electricity. NEC’s monitors follow the strictest magnetic field, alternating electric field, and electrostatic recommendations of the Swedish Board for Technical Accreditation, or SWEDAC (previously known as MPR, National Board for Measurement and Testing). The JC-2145UMB follow the recommendations of the TCO which s
ページ10に含まれる内容の要旨
Contents of the Package E - 5 Horizontal and vertical FullScan capability can increase the display size of a variety of video modes to the edges of the monitor bezel. The FullScan capability allows you to use the entire screen area in most resolutions, significantly expanding image size. Contents of the Package Included with your MultiSync P1150 color monitor are the following items: – MultiSync P1150 (JC-2145UMB/R) – Power cord – MultiCable – User’s manual
ページ11に含まれる内容の要旨
E - 6 Recommended use Recommended use For optimum performance when setting up and using the MultiSync P1150 colour monitor, please note the following: – The optimum monitor position is away from direct sunlight. – Place the monitor just below eye level for the ideal viewing angle. – Allow adequate ventilation around the monitor so that heat can properly dissipate. – Do not place any heavy objects on the power cord. Damage of the cable may cause shock or fire. – Keep the monitor away from high ca
ページ12に含まれる内容の要旨
Recommended use E - 7 – To separate the equipment from the power source you have to remove the plug from the inlet socket. – The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible. – We recommend using the power cord supplied with the monitor. However, if another type of power cord is required, power cord H05VV-F should be used except in U.K. – To clean the CRT surface use a lint-free, non-abrasive cloth and a neutral cleaner
ページ13に含まれる内容の要旨
E - 8 Quick Start Quick Start The following chart summarises the connection process for the MultiSync P1150. For more details please turn to the following pages if you are connecting to an IBM compatible, Macintosh compatible or other systems. Yes Is the BNC Input being used? Set the BNC/D-SUB switch to the up (raised) position. No Set the BNC/D-SUB switch to the down (push in) position. Is the computer a Power Macintosh Yes Use the Apple HDI-45 6100/60? cable adapter to attach the monitors sign
ページ14に含まれる内容の要旨
Connection to Your Personal Computer E - 9 Connection to Your Personal Computer The MultiSync P1150 color monitor complements NEC computers, PC compatibles, Macintosh and Macintosh compatibles. For the PC: Your system has one of two configurations: – the video controller is built into the computer – the video controller is in the form of a display card (sometimes referred to as the graphics card, video adapter or graphics board) Both configurations have a video connector (or a CRT PORT on laptop
ページ15に含まれる内容の要旨
E - 10 Connection to Your Personal Computer To attach the MultiSync P1150 monitor to your system, follow these instructions: 1. Turn off the power to your computer and MultiSync monitor. 2. If necessary, install the display card. For more information, refer to the display card manual. 3. Make sure the BNC/D-SUB Switch on the front of the monitor is set to the D-SUB down (pushed in) position. 4. For the PC: Connect the 15-pin mini D-SUB end of the MultiCable to the connector of the Display card o
ページ16に含まれる内容の要旨
Connection to Your Personal Computer E - 11 4. Connect the D-SUB ( or the appropriate connector) end of the video cable supplied with the graphics card to the connector of the video card. 5. Connect the red BNC cable to the BNC connector on the monitor labelled “R”. The green BNC cable should be connected to the BNC connector on the monitor labelled “G”. The blue BNC cable should be connected to the BNC connector on the monitor labelled “B”. If you have a fourth BNC connector (composite SYNC.) c
ページ17に含まれる内容の要旨
E - 12 On-Screen Manager (OSM ) 2. Follow the installation guidelines on the page before (Connections to computers or cards using BNC cables), to connect the second system. 3. Turn on the monitor and both systems. 4. This completes the installation. 5. Use the BNC/D-SUB switch on the front panel of the monitor to switch between the systems. NOTE: If you have any problems, please refer to the section “Trouble Shooting”. On-Screen Manager (OSM ) Now, On-Screen Manager (OSM ) Controls have made the
ページ18に含まれる内容の要旨
On-Screen Manager (OSM ) E - 13 OSM buttons on the front of the monitor function as follows: Main Menu Sub-Menu EXIT Exits the OSM Controls. Exits to the OSM main menu. CONTROL ▼ /▲ Moves the highlighted area Moves the highlighted area up/down to select one of up/down to select one of the controls the controls. CONTROL+/- Moves highlighted area Moves the bar in the + or – left/right to select direction direction to increase or one of the controls decrease the adjustment. PROCEED Has no function
ページ19に含まれる内容の要旨
E - 14 OSM Menus Turning off OSM: – When in the main menu: Press the EXIT button. – When in the sub-menu: Press the EXIT button twice. – When in the sub, sub-menu: Press the EXIT button three times. OSM Menus Main Menu OSM’s main menu of control icons gives you an overview of the selection of controls available. When OSM is activated, icons are displayed at the top of the menu. If an arrow button is displayed (⇒), it indicates further choices are available. BRIGHTNESS CONTRAST DEGAUSS
ページ20に含まれる内容の要旨
OSM Menus E - 15 The icons control the following: Brightness/Contrast Control BRIGHTNESS: Adjusts the overall image and background screen brightness. CONTRAST: Adjusts the image brightness in relation to the background. DEGAUSS: Eliminates the build-up of stray magnetic fields which alter the correct scan of the electron beams and affect the purity of the screen colours, focus, and convergence. When activated, your screen image will jump and waver a bit as the screen is demagnetised. Caution:
