ページ1に含まれる内容の要旨
X20G-NagaIII
User’s Manual
ページ2に含まれる内容の要旨
FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonab
ページ3に含まれる内容の要旨
The Federal Communications Commission warns that changes or modifications of the unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE mark for Class B ITE (Following European standard EN55022/1998; EN61000- 3-2/1995; EN61000-3-3/1995, EN55024/1998, EN60950/1992+A1+A2+A3+A4+A11) Radio Frequency Interference Statement Warning: This is a Class B product. In a domestic environment, this product may cause radio int
ページ4に含まれる内容の要旨
TABLE OF CONTENTS TABLE OF CONTENTS ..........................................................................................III Your New LCD Monitor 1 Unpacking 1 Identifying Components 3 Adjusting the Tilting Angle 5 Connecting AC Power and Video Cable 6 Power Management System 7 The LCD Monitor’s Control Panel 8 Adjusting the Monitor’s Display 9 TFT LCD Monitor Specifications 14 Supported Timing 16 Troubleshooti
ページ5に含まれる内容の要旨
The LCD Monitor Your New LCD Monitor Your LCD Monitor has been designed to be versatile, ergonomic and user-friendly. The LCD Monitor is capable of displaying most standards, from 640x400 VGA to 1680x1050 WSXGA+. The digital controls located on the front panel allow the user to easily adjust the Monitor’s display parameters, and the LCD Monitor’s small footprint gives you more room in your workspace for other peripherals. Lightweight and compact, the LCD Monitor is the perfect solutio
ページ6に含まれる内容の要旨
Note: Using a computer for an extended period of time with a poor workstation set-up and incorrect working habits can cause health problems. The science of ergonomics studies the relationship between health and a suitable working environment. There is a section on ergonomics at the end of this chapter. For more information on ergonomics, contact your nearest computer bookstore, or local library. The Internet also has information on this and other subjects. If you previously were usin
ページ7に含まれる内容の要旨
Identifying Components A. The LCD Monitor — Front View 3 1 1 2 4 Figure 1-1: The LCD Monitor Front View 1. Sceptre logo Indicator This Logo indicator will light on for 3 minutes , then dimmer 2. Monitor Stand 3. LCD Screen The LCD monitor is a 20.1-inch TFT 1680 x 1050 Wide WSXGA+ screen. 4. LCD Monitor Control Panel Refer to Chapter 2 for more details. 3 Rev.2
ページ8に含まれる内容の要旨
B. "Hot Keys" for Quick Adjustment of Monitor Settings Figure 1-2: "Hot Keys" 1. Brightness adjustment "hot key": 50 Press - or + buttons to allow you to - + adjust the brightness function 2. Source select “ Hot Key : Source D-Sub Press S button to allow you to change the input source between DVI port and Source DVI RGB port, if the screen can’t detect signal, then
ページ9に含まれる内容の要旨
Adjusting the Tilting Angle The LCD Monitor’s angle settings range from 0 ° to 10 °. 0 to 10 10 Figure 1-4: Tilting the Monitor 5 Rev.2
ページ10に含まれる内容の要旨
Connecting AC Power and PC Video Cable Note: Turn off your PC and the LCD monitor before connecting your LCD monitor to the computer. AC-IN Audio DVI VGA AC Outlet (Wall Socket) Computer Power Cord Figure 1-5: PC conenction Connecting with YPbPr configuration RCA to Stereo Jack cable Audio DVI to Ycbcr cable DVI to YPbPr Cable AC-IN AC Outlet (Wall Socket) Computer Power Cord Figure 1-6 Note: Our machine can support up to 1080P YPbPr signal 6
ページ11に含まれる内容の要旨
Power Management System This LCD Monitor complies with the VESA DPMS power management proposal. When the LCD Monitor is in power-saving mode or detects an incorrect timing, the monitor screen will be blank and the power LED indicator starts blinking. 7 Rev.2
ページ12に含まれる内容の要旨
The Display Controls The LCD Monitor’s Control Panel Figure 2-1: The Control Panel 1. Cursor Movement button & These buttons let you move horizontally across your settings 2. Ajustment button - & + These buttoms let you to change the setting value or move to next sub-menu 3. Menu: OSD Menu button Press this button to display the OSD (On-Screen Display) menu. 4. Source: Source select hot key Press this button to change the input source from D-Sub to DVI 5. Power Switch
ページ13に含まれる内容の要旨
Adjusting the Monitor’s Display OSD Main Menu 1. Pressing the OSD Menu button causes the screen below to appear. 2. Use the & key to select the desired group, then press - & + key to the sub-menu 3. Repeat step 2 to select the changed item, then press - & + to change the value. 4. Press the Menu to return to the sub-menu item 3 to another adjustment Timing : 1680 x 1050 V/H Freq : 74.6Hz 79KHz Sceptre X20G-NAGA III Recommned 1680 x 1050 or
ページ14に含まれる内容の要旨
Auto Adjust Option The Auto Adjust option lets the monitor determine and select the settings that are most appropriate for your system requirements. Note: it only apply for Analog RGB input Provides you with the current display timing information. Brightness and Contrast Adjustment Adjusts the Brightness value Adjusts the Contrast value Execute the white balance function Return to the previous Menu Audio Function V
ページ15に含まれる内容の要旨
Set up the color temperature value User Mode Sets the color temperature to 6500K Sets the color temperature to 9300K Red change Red gain for the color temperature (only valid when color temperature set at user mode ) Green change Green gain for the color temperature (only valid when color temperature set at user mode )
ページ16に含まれる内容の要旨
Adjusts phase tracking to reduce display flicker Moves the whole screen right or left Moves the whole screen up or down Return to the previous Menu OSD Adjustment Restores settings to factory default values Sets the OSD timer Moves the OSD menu horizontally Moves the OSD menu vertically Set the graphic mode or text mode Return to the previous Menu Exit the OSD screen 12
ページ17に含まれる内容の要旨
Note: 1) No video When the monitor is ON and there is no video signal received, the following message will be displayed 2) Signal out of range When the frequency range of the signal is out of the Monitor’s specifications, (over 85HZ) the display will show the following message Out of Range 13 Rev.2
ページ18に含まれる内容の要旨
Appendix A TFT LCD Monitor Specifications Item Specification LCD Panel 20.1" WSXGA+ Control Software Power switch with LED indicator Functions (ON/OFF) Power On-Screen Main Menu Submenu Display Information (OSD) Brightness Brightness/Contrast/White /Contrast Control balance/Exit Audio Control Volume/Mute/Exit Color temperature User mode, 9300K, 6500K Control R,G,B, gain value Display Quality Auto Adjustment/Phase adjustment/Screen Size/ Screen Horizontal position/Screen V
ページ19に含まれる内容の要旨
Scanning Frequency 24-91K H/V, Hz 50-85 Power Management Meets VESA DPMS Power Consumption 51.6W/1W Max. (ON/OFF, W) Dimensions 18.72 x 15.14 x 6.69 in. WxHxD (475.4 x 384.5 x 170mm) Net Weight 16.256 lbs (approx.) (6.4 Kg) Power Supply Universal Input AC Socket Environment Operating Temperature: 32 to 104°F (0 to 40° C) Relative Humidity: 10% to 90% Regulatory FCC B DoC,UL/cUL,Energy star 15
ページ20に含まれる内容の要旨
Appendix B Supported PC Timing Vertical Horizontal Item Standards Resolution Dot Clock Scanning Scanning (MHz) Frequency Frequency (Hz) (kHz) 1 NEC PC98 640x400 21.05 56.42 24.83 2 MAC 13" mode 640x480 30.24 66.67 35.00 3 MAC 17" mode 1024x768 80.00 75.02 60.24 4 VGA 640x350 25.18 70.09 31.47 5 VGA 640x400 25.18 70.09 31.47 6 VGA 640x480 25.18 59.94 31.47 7 VESA 640x480 31.50 72.81 37.86 8 VESA 640x480 31.50 75.00 37.50 9 VESA 640x480 36.00 85.00 43.30 10 VESA 800x600 36.00
