Xenarc Technologies 1020YVの取扱説明書

ページ1に含まれる内容の要旨

8. Click Next to accept the Program Folder default, shown below. Files will
then start to be copied to your computer.



1020YV VGA LCD Monitor
1020TSV VGA LCD Monitor w/ Touch Screen



9. Setup will finish installing and tell you that The Touchkit driver has been
installed. Now plug the USB connector from your monitor into your
computer. Click YES to perform 4-points calibration when asked to.
Follow the instruction to touch, hold, and then release each of the four
blin

ページ2に含まれる内容の要旨

NOTE 5. DO NOT Plug in the USB connector from the monitor into your computer when it asks you to. Simply Click OK to continue. NOTE 1: If you are trying to connect the monitor to a laptop computer, please make sure to enable the 15-Pin D-SUB external monitor output located at the back of your laptop computer. Some laptop computers have three modes: Laptop Display Only, Laptop Display plus External Monitor, and External Monitor Only. If this is the case, please switch to th

ページ3に含まれる内容の要旨

External Buttons, Hot keys description: Install the Touch Screen Driver for Microsoft Windows XP: Note1: The OSD Menu is only available when a video source is present. Here is a simple walk through of Windows XP Touch Driver Installation for Note2: The Hot keys are only available while the OSD menu is off. 1020TSV. You can skip this step if you have the 1020YV. “M” – Stands for Menu. This button is for OSD menu on/off toggling. “S” – Stands for Select. Use this button to scroll

ページ4に含まれる内容の要旨

On Screen Display functions description: Internal Specifications: The OSD can be turn on by pressing the button “M”. LCD Module : 10.2” Digital TFT LCD LCD Native resolution : 800 x 480 (2400 x 480 dots) Brightness Pixel Pitch : 0.1905 x 0.1905 mm - Adjust brightness by pressing the Increase/Decrease buttons. Increase the LCD Panel Brightness : 500 NIT (max.) / 450 NIT (typ.) number for higher brightness. Decrease the number for lower brightness. Contrast : 300 : 1 Contrast