ページ1に含まれる内容の要旨
DCS 6000
Installation Manual
Digital Conference System
SW 6000 Conference Management
Software Version 5.3
Installation Manual
Danish Interpretation Systems DIS
ページ2に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Copyright © 2010 DIS SW 6000 Installation Manual ver 5.3 rev C 27/08/2010 No part of this publication may be reproduced or utilised in any form or by any means without permission in writing from the publisher.
ページ3に含まれる内容の要旨
Danish Interpretation Systems Installation Manual List of Contents Upgrading procedure (using old MSDE List of Contents .................................................... 3 Database Server)..............................................36 Introduction........................................................... 4 Upgrading from MSDE Database Server to Preparations and Requirements ......................... 5 SQL 2008 Server Express .............................36 Upgrading procedure
ページ4に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Introduction This manual describes how to design a DCS 6000 Conference system using the SW 6000 Software Packages, how to install the SW 6000 Software Packages and how to setup the system for running the first time. This document does however not describe the use of the applications like i.e. the CUA and CAA in details. Please consult the relevant manuals for this. The manual does also give detailed descriptions of the more technical pa
ページ5に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Preparations and Requirements Minimum requirement The minimum requirements for a PC running an application are: • Min. Pentium 1.5GHz • Min. 2 GB RAM • Min. 10GB HD • CD-ROM drive • RS232 port (on the PC running the CUI application) or USB/RS232 adapter connected to an USB port • USB port if CP 6000 Chip Card Programmer is to be used • T-base 10 network card • VGA screen, min. resolution 1024x768. The CUA and CDA are designed for a
ページ6に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Supported Operating Systems SW 6000 Software v5.3 support standard installations* of the following operating systems • Windows XP Professional with Service Pack 1 or later. Windows XP Home Edition is not supported. • Windows Vista • Windows 7 (32 bit and 64 bit) • Windows Server 2003, 2008 and 2008 R2 *Please notice that cloned operating systems are not considered a standard installation. Clones may cause problems with duplicate SIDs c
ページ7に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Windows XP Professional Service Pack 2 (and 3) corrections Windows XP Professional Service Pack 2 and 3 is available from Microsoft; however those service packs have some built in errors, which have to be corrected before running SW 6000. A description in how to correct the fault can be found below or at http://support.microsoft.com/kb/839279: 1. Make sure that the Log On As account for the MSDTC service is the Network Service account. T
ページ8に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Click Start, and then click Run. a. In the Run dialog box, type Firewall.cpl, and then click OK b. In Control Panel, double-click Windows Firewall. c. In the Windows Firewall dialog box, click Add Program on the Exceptions tab. d. In the Add a Program dialog box, click the Browse button, and then locate the Msdtc.exe file. By default, e. the file is stored in the :\Windows\System32 folder. f. In the Add a Progr
ページ9に含まれる内容の要旨
Danish Interpretation Systems Installation Manual e. In the Local DTC Properties dialog box, click on Security tab. f. Click to select the Network DTC Access check box. g. Under the Transaction Manager Communication group, click to select the Allow Inbound check box. To allow the distributed transaction to run on this computer from a remote computer. h. Under the Transaction Manager Communication group, click to select the Allow Outbound check box. To allow the distributed transaction
ページ10に含まれる内容の要旨
Danish Interpretation Systems Installation Manual At the command prompt, type Msdtc –install to install MSDTC. l. m. At the command prompt, type Net start msdtc to start the MSDTC service. Note that the Log On As account for the MSDTC service is set to Network Service account. 2. Enable MSDTC to allow the network transaction. To do this, follow these steps: a. Click Start, and then click Run. b. In the Search programs and files text box, type dcomcnfg.exe, and then click Enter
ページ11に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Computer Name Before you start installing the SW 6000 software package you must know the name of the computer on which the database is running. To find the computer name on Windows XP follow these steps 1 Open ‘Control Panel’. 2 Double click on the ‘System’ icon. 3 On the ‘System Properties’ window select the ‘Computer Name’ tab. 4 Click on the ‘Change’ button. 5 The name of the computer can be found in the textbox labelled ‘Fu
ページ12に含まれる内容の要旨
Danish Interpretation Systems Installation Manual System design Prior to installing the software the system has to be designed, as the SW 6000 Software Package gives options for all in-between a small installation with one PC and a large installation with more than 1000 PCs. Applications The SW 6000 Software Packages consists of 4 main applications • CUA - Conference User Application • CAA - Conference Administrator Application • CDA – Conference Display Application • ECA - Extern
ページ13に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Installation design The CDA, CUI, CUA, CAA and ECA applications can all be installed on the same PC or all on separate PCs, but this is normal procedure. For performance reason the CUI should be installed at the same PC/Server as the database. Before installing the applications the design of the system has to be decided. The following schematics are showing various system designs with SW 6000 applications. The abbreviations shown above
ページ14に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Chairman control Design characteristics This design is used, where no technician is needed and where the control and administration can be done from the PC placed in the ‘Meeting Room’. Reservations The CU 6005/6010/6011 has to be placed close to the PC (normally max. 2 m) or a special RS232 long distance interface has to be used. Manual 01 19 60011 14
ページ15に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Installation with Multiple PCs Chairman & Technician control Design characteristics This design is used, where a ‘Chairman’ is either controlling the system or monitoring the system and where a ‘Technician’ can take over the control of the system if needed. Administration is done on the ‘Technician’ PC. Reservations The CU 6005/6011 has to be placed close to the ‘Technician’ PC (normally max. 2 m) or a special RS232 long distance inte
ページ16に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Chairman & Technician control including Display and External control Design characteristics This design is used, where a ‘Chairman’ is either controlling the system or monitoring the system and where a ‘Technician’ can take over the control of the system if needed. Administration is done on the ‘Technician’ PC. Reservations The CU 6005/6011 has to be placed close to the ‘Technician’ PC (normally max. 2 m) or a special RS232 long distance
ページ17に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Chairman & Delegates control < 10 PCs Design characteristics This design is used, where some or all of the ‘Delegates’ have access to a PC. The control of the system can be done from the ‘Technician’ or the ‘Chairman’ or any ‘User’ with those facilities. Administration is done on the ‘Technician’ PC. Reservations The CU 6005/6011 has to be placed close to the ‘Technician’ PC (normally max. 2 m), or a special RS232 long distance interface
ページ18に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Chairman & Delegates control >10 PCs Design characteristics This design is used, where some or all of the Delegates have access to a PC. The control of the system can be done from any PC with CUA installed where the User Type gives control privileges’ i.e. the ‘Technician’ or the ‘Chairman’. Administration is done on the ‘Technician’ PC or on the two ‘Administration’ PCs. Reservations The CU 6005/6011 has to be placed close to PC where t
ページ19に含まれる内容の要旨
Danish Interpretation Systems Installation Manual Software Installation ‘One PC’ Installation The following installation procedure describes how to install the SW 6000 Software on a PC in a design as described in the section ‘One PC System Design’. Installing Prerequisites 1 Insert the CD with the ‘SW 6000 Version 5.3’ Software in the CD-ROM drive in the PC IMPORTANT: If the software is downloaded from the DIS web site the folder ‘SW 6000 Installation’ must be copied to C:\ befor
ページ20に含まれる内容の要旨
Danish Interpretation Systems Installation Manual 6 Click ‘Next’ 7 Accept the License Conditions and click ‘Next’ Manual 01 19 60011 20
