ページ1に含まれる内容の要旨
29460
Two-Line Speakerphone with
Call Waiting and Caller ID
User’s Guide
We bring good things to life.
ページ2に含まれる内容の要旨
FCC REGISTRATION INFORMATION Your telephone equipment is registered with the Federal Communications Commission and is in compliance with parts 15 and 68, FCC Rules and Regulations. 1 Notification to the Local Telephone Company On the bottom of this equipment is a label indicating, among other information, the FCC Registration number and Ringer Equivalence Number (REN) for the equipment. You must, upon request, provide this information to your telephone company. The REN is useful in determining t
ページ3に含まれる内容の要旨
TABLE OF CONTENTS FCC REGISTRATION INFORMATION .... 2 RECEIVING CALLS............................ 25 INTERFERENCE INFORMATION ............ 2 USING THE HANDSET ................... 25 HEARING AID COMPATIBILITY ........... 2 USING THE SPEAKERPHONE ........... 26 INTRODUCTION ..................................... 5 USING THE HEADSET ................... 26 BEFORE YOU BEGIN .............................. 6 SWITCHING BETWEEN USING THE PARTS CHECKLIST ............................. 6 SPEAKERPHONE, HANDSE
ページ4に含まれる内容の要旨
CALLER ID FEATURES .......................... 37 PHONE DIRECTORY .............................. 52 SUMMARY SCREEN ......................... 37 STORING A NAME AND NUMBER ....... 52 RECEIVING AND STORING CALLS ........ 38 CHANGING A STORED NAME OR REVIEWING CALL RECORDS ............... 39 NUMBER ................................ 54 DELETING A CALL RECORD ............... 39 DIALING A STORED NUMBER............. 54 DELETING ALL CALL RECORDS .......... 40 ADVANCED FEATURES.......................... 55
ページ5に含まれる内容の要旨
INTRODUCTION Your Caller ID phone stores and displays specific information, provided by your local telephone company, to subscribers of Caller ID or similar caller identification services. You must subscribe to one of these services in order to use this unit. Your Caller ID phone enables you to: • Identify callers before you answer the phone. • View the time and date of each incoming call. • Record up to 99 Caller ID messages sequentially. • Know who called while you were away. To get the most f
ページ6に含まれる内容の要旨
E L T T BEFORE YOU BEGIN PARTS CHECKLIST Make sure your package includes the following items: SELECT EXIT CLEAR VOICE MAIL CALLER ID DIAL PAUSE MENU DIRECTORY STORE LOWER REDIAL 8 ABC DEF CONFER 1 2 3 7 BUSY REDIAL 6 GHI JKL MNO 4 5 6 5 LINE 2 4 PQRS7 TUV8 WXYZ9 VOLUME 3 TONE OPER0 # LINE 1 2 * FLASH HEADSET MUTE HOLD 1 SPEAKER Base Handset cord Mounting bracket Handset 1 black wire 1 gray wire telephone line cord telephone line cord AC power supply MODULAR JACK REQUIREMENTS You need an RJ14 typ
ページ7に含まれる内容の要旨
INSTALLATION IMPORTANT INSTALLATION INFORMATION • Never install telephone wiring during a lightning storm. • Never touch uninsulated telephone wires or terminals, unless the telephone line has been disconnected at the network interface. • Use caution when installing or modifying telephone lines. INSTALLING THE BATTERIES Your phone uses 3 AA-size alkaline batteries for power backup in case AC main power is off. CAUTION: Remove batteries if storing over 30 days. 7
ページ8に含まれる内容の要旨
1. If the line cords are already connected, disconnect them from the base unit. 2. Use a screwdriver to pry up the battery compartment door on the bottom of the phone. 3. Insert 3 AA-size alkaline batteries as shown on the diagram in the battery compartment. 4. Snap the battery compartment door back into place. 5. If the line cords were previously connected, re-attach them to the unit and check your memory locations. NOTE: If the low battery icon appears in the display, you need to replace the b
ページ9に含まれる内容の要旨
INSTALLATION OPTIONS Although you can use your 2-line telephone with a single phone line, you must have two lines (separate phone numbers) to use a two-line system. The following diagrams show two possible systems: Two Lines on a Single Modular Jack One type of two-line phone system uses a single RJ14 modular jack which contains both phone lines. Connect the phone cord to the LINE 1+2 jack. You must use a 4-conductor telephone line cord like the gray one packed with your unit. 9
ページ10に含まれる内容の要旨
Each Line on a Separate Modular Jack Line 2 Line 1 If you have two separate phone jacks, each with its own line, connect one of the phone cords to the LINE 2 jack, and connect the remaining phone cord to the LINE 1+2 phone jack located on the back of the phone. NOTE: Connect the phone cord from the LINE 1+2 jack to the outlet that you want to be line 1. NOTE: Two-line capability requires two- line service from your local telephone company. A Single Line on a Modular Jack If you want to only conn
ページ11に含まれる内容の要旨
DESKTOP INSTALLATION Two Lines on a Single Modular Jack 1. Plug one end of the handset cord into 1 3 the handset and the other end into the jack on the side of the base. Place the handset in the base. 2 2. Plug the power supply cord into the POWER 6V AC jack on the base and into an AC outlet. 3. Plug the gray telephone line cord into the LINE 1+2 jack on the base and into a dual line modular jack. For single 2 1 POWER line use, See “A Single Line on a 6V AC DATA PORT DATA PORT LINE 1+2 LINE
ページ12に含まれる内容の要旨
Each Line on a Separate Modular Jack 1. Plug one end of the handset cord into the handset and the other end into the 3 1 jack on the side of the base. Place the 4 handset in the base. 2. Plug the power supply cord into the POWER 6V DC jack on the base and 2 into an AC outlet. 3. Plug the telephone line cord into the jack marked LINE 1+2 on the back of the unit and into a single line modular jack you want to be line 1 . 4. Plug the other telephone line cord into 2 1 POWER 6V AC DATA PORT DATA
ページ13に含まれる内容の要旨
WALL MOUNT INSTALLATION Two Lines on a Single Modular Jack 2 1. Remove the mounting bracket. Rotate it so that the bottom of the phone is flat. Reattach the wall mount bracket by inserting the tabs into the slots on 1 the top of the unit first, and then snapping the bottom tabs into place. 2. Plug the power supply cord into the 3 4 POWER 6V AC jack on the base and into an AC outlet. 3. Plug the gray telephone line cord into the jack marked LINE 1+2 on the back 2 1 of the unit and plug the ot
ページ14に含まれる内容の要旨
E L T T 4. Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.) 5. Plug one end of the handset cord into the handset and the other end into the jack on the side of the base. Place the handset in the base. NOTE : The phone automatically 4 defaults to touch-tone dialing. To change to pulse (rotary) dialing, see “Tone/ Pulse Dialing.” If you don’t know which type of service you have, check with the SELECT phone company. EXIT CLEAR V
ページ15に含まれる内容の要旨
Each Line on a Separate Modular Jack 2 1. Remove the mounting bracket. Rotate it so that the bottom of the phone is flat. Reattach the wall mount bracket by inserting the tabs into the slots on the top of the unit first, and then snapping the bottom tabs into place. 5 1 2. Plug the power supply cord into the POWER 6V AC jack on the base and 3 into an AC outlet. 3. Plug the telephone line cord into the 4 jack marked LINE 1+2 on the back of the unit and into a single line modular jack you want to
ページ16に含まれる内容の要旨
E L T T 5. Slip the mounting holes over the wall plate posts and slide the unit down firmly into place. (Wall plate not included.) 6. Plug one end of the handset cord into the handset and the other end into the jack on the side of the base. Place the 5 handset in the base. NOTE : The phone automatically defaults to touch-tone dialing. To change to pulse (rotary) dialing, see “Tone/ Pulse Dialing.” If you don’t know which type of service you have, check with the SELECT phone company. EXIT CLEAR D
ページ17に含まれる内容の要旨
DATA PORT This phone is equipped with a DATA PORT jack for you to connect an auxiliary phone device, such as a fax machine, computer modem, answering machine, or even a cordless phone. The DATA PORT switch on the back of the phone controls the DATA PORT jack by enabling you to choose the line to be 2 1 used, either line 1 or line 2. POWER 6V DC DATA PORT DATA PORT LINE 1+2 LINE 2 You can use the DATA PORT jack to hook up your fax machine, for example, and then set the DATA PORT switch to 2 i
ページ18に含まれる内容の要旨
In the event that you are talking to someone on line 2 and want him to fax something to you, change the DATA PORT switch to 1 and give him the phone number for line 1. Your fax machine can now receive calls on line 1. IMPORTANT: Be sure to switch the fax machine back to the normal line when you are done because outside callers who do not know 2 1 POWER 6V DC DATA PORT that you have multiple lines will not DATA PORT LINE 1+2 LINE 2 be able to reach your fax machine if they dial the normal fax
ページ19に含まれる内容の要旨
E L T T SETUP SETTING THE DATE AND MENU EXIT SELECT SHUTTLE button button button knob TIME NOTE: If you do not set the time and SELECT date, it will automatically be set when the EXIT telephone company sends the time and CLEAR date with the Caller ID information. The DIAL VOICE MAIL CALLER ID PAUSE MENU DIRECTORY STORE LOWER unit resets the hour and minute each REDIAL 8 ABC DEF CONFER 1 2 3 time a call is received. 7 BUSY REDIAL 6 GHI JKL MNO 4 5 6 5 LINE 2 4 PQRS TUV WXYZ 7 8 9 MONTH VOLUME 3 O
ページ20に含まれる内容の要旨
E L T T HOUR 1. Press the MENU button. Time and date is shown. MENU EXIT SELECT SHUTTLE 2. Press SELECT. button button button knob 3. Turn the SHUTTLE knob to scroll to the desired hour. SELECT EXIT 4. Press SELECT to confirm. You are CLEAR DIAL VOICE MAIL CALLER ID now ready to enter the minutes. PAUSE STORE MENU DIRECTORY LOWER REDIAL 8 CONFER ABC DEF 1 2 3 MINUTES 7 BUSY REDIAL 6 GHI JKL MNO 4 5 6 5 LINE 2 1. Turn the SHUTTLE knob to scroll to PQRS TUV WXYZ 4 7 8 9 VOLUME 3 the desired minute
