ページ1に含まれる内容の要旨
motorola T325
Quick Start Guide
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
congratulations The Motorola T325 Portable Bluetooth® Handsfree Car Kit Speakerphone gives you the freedom to make and receive phone calls in your vehicle while safely keeping your hands on the steering wheel using: • caller name identification • automatic power on and off when you enter or leave your vehicle • direct access to the favorite contacts you use most frequently while in your vehicle. Caution: Please read the important Legal & Safety information at the back of this guide. Note:
ページ4に含まれる内容の要旨
your speakerphone your speakerphone Take a moment to familiarize yourself with your new T325 speakerphone. Speaker Call Indicator Button Charging Light Power Port Switch Microphone Volume Up Mute/ Volume Down Button Favorite Contacts Button Button 2
ページ5に含まれる内容の要旨
charge it charge it You’ll need to charge your speakerphone before using it. The indicator light is red while the battery is charging. When the battery is fully charged, the indicator light turns blue. Note: Speakerphone is functional while charging. Note: Your battery is designed to last the life of your product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery will damage your speakerphone. 3
ページ6に含まれる内容の要旨
connect wirelessly connect wirelessly pair & connect Let’s get your speakerphone paired and connected to your Bluetoothenabled phone. 1 Turn off any Bluetooth devices previously paired (linked) with your speakerphone. 2 Turn off any Bluetooth devices previously paired (linked) with your phone. 3 Turn on the Bluetooth feature on your phone. 4 Turn on your speakerphone (see page 8). The indicator light becomes steadily lit in blue. 5 Set your phone to search for Bluetooth devices. 6 Select
ページ7に含まれる内容の要旨
connect wirelessly download phone contacts Once paired, your speakerphone automatically downloads contact names and numbers from your phone so that it can announce the name of your incoming caller. Your phone may first request permission to accept information access. Go ahead and accept so downloading can begin. Once downloading begins, you hear “downloading caller ID information” . The indicator light flashes in purple while downloading. When your downloading is complete (210 minutes, d
ページ8に含まれる内容の要旨
connect wirelessly reconnect After initially pairing and connecting your phone and speakerphone, you don’t need to do it again. For daily use, make sure your speakerphone is turned on, and your phone’s Bluetooth feature is on. Your speakerphone and phone will connect automatically! test your connection 1 Slide the speakerphone onto your visor (see page 7). 2 On the phone, dial the number and press the Call/Send key. If your phone and speakerphone are successfully connected, you hear ring
ページ9に含まれる内容の要旨
install in car install in car Slide the visor clip onto your sun visor as shown 7
ページ10に含まれる内容の要旨
turn it on & off turn it on & off You can manually turn your speakerphone on and off or use the automatic on/off option. The speakerphone may take up to 4 seconds to power on. manual on/off Slide and hold the Power switch to ë until your hear a tone, then release. Power Off Position Power On Position To turn off your speakerphone, slide the Power switch toê. You hear an audio tone when turned off. 8
ページ11に含まれる内容の要旨
turn it on & off automatic on/off This feature automatically disconnects the speakerphone and turns it off when your phone is more than 20 feet away for more than 20 seconds (actual distance is network/ phone dependent). When you return and open the car door, the speakerphone turns on and tries to reconnect. Note: Moving the speakerphone also turns it on. To enable automatic on/off, just turn your speakerphone on and leave the Power switch in the center position. Automatic On/Off (Center)
ページ12に含まれる内容の要旨
calls calls To... answer call Press the Call button. reject call Press the Volume Down button. make a voice Press the Call button and you hear an dial call audio tone. make a Press the Mute/Favorite Contacts favorite button, then press Volume buttons to contact call scroll through your favorite contact list. When you hear the name to call, press the Call button. Note: Press the Mute/Favorite Contacts button to exit. While your speakerphone stores up to 1,500 phone contacts, direct acces
ページ13に含まれる内容の要旨
calls To... transfer call Press and hold Mute/Favorite between Contacts button until you hear an phone and audio tone. speakerphone Note: Your speakerphone supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See the instructions that came with your phone. Note: Some call features are phone/network dependent. 11
ページ14に含まれる内容の要旨
status indicator light status indicator light with charger plugged in & speakerphone off speakerphone speakerphone status indicator red charging blue charging complete with charger not plugged in speakerphone speakerphone status indicator off power off three blue powering on/off flashes steady blue pairing/connect mode rapid blue/ connection successful purple flashes quick blue flash incoming/outgoing call slow blue pulse connected (on a call) 12
ページ15に含まれる内容の要旨
status indicator light speakerphone speakerphone status indicator slow blue flash standby (connected to phone) red flash idle (not connected to a phone) slow purple connected call muted pulse slow purple downloading contacts from flash phone steady red (for low battery (up to 1.5 hours) 5 seconds) (you hear a reminder tone every minute when battery is low) 13
ページ16に含まれる内容の要旨
download contacts download contacts phonebook download You can manually download up to 1,500 phonebook contacts from your phone to your speakerphone so it can announce the name of your incoming caller. To do this, press both Call and Mute/Favorite Contacts buttons at the same time until you hear a tone or “downloading caller ID information”, or see your phone requesting for permission to accept information access from your phone. When download is complete, you hear “download complete”. I
ページ17に含まれる内容の要旨
download contacts This allows the speakerphone to announce the name of your incoming caller. 1 Press and hold the Mute/Favorite Contacts button until you hear“connection to has been dropped, ready to receive V-card”. 2 Select one or more phonebook contacts on your phone and send it to your speakerphone via Bluetooth (see your phone’s user guide for detailed instructions). To exit, press and hold Mute/Favorite Contacts button. Otherwise, your speakerphone automatically exit
ページ18に含まれる内容の要旨
download contacts favorite contact download The first time you pair your phone to your speakerphone, it will automatically download your phone's history list of the last 10 (or 25) calls. The list changes over time to your most frequently used contacts when connected to your speakerphone. See page 10 on how to make a favorite contact call. 16
ページ19に含まれる内容の要旨
battery check battery check Press and hold both Volume buttons while not on a call. voice prompt available talk time “battery level is very up to 1.5 hours low. Please recharge now” “battery level is low” up to 6 hours “battery level is up to 13 hours medium” “battery level is high” up to 17 hours 17
ページ20に含まれる内容の要旨
personalize personalize You can change settings on your speakerphone. To do this, turn off your speakerphone, then press and hold the Call button and move the Power switch to the ë position until you hear “welcome to setup” . Follow the voice prompts to change settings for: • Language • Enable/disable voice prompts • Enable/disable Name/Number Caller ID feature • Size of favorite contact list (10 or 25) 18
