ページ1に含まれる内容の要旨
DE’LONGHI
COOKING
INSTALLATION and SERVICE INSTRUCTIONS
USE and CARE INSTRUCTIONS
DEF905E
CERAMIC COOKER
distributed by
DeLonghi Australia Pty Ltd
DeLonghi New Zealand Ltd
ページ2に含まれる内容の要旨
Dear Customer, Thank you for having purchased and given your preferen- ce to our product. The safety precautions and recommendations reported below are for your own safety and that of others. They will also provide a means by which to make full use of the fea- tures offered by your appliance. Please keep this booklet in a safe place. It may be useful in future, either to yourself or to others in the event that doubts should arise relating to its operation. This appliance must be used only f
ページ3に含まれる内容の要旨
Important: This appliance is designed and manufactured solely for the coo- king of domestic (household) food and is not suitable for any non domestic application and therefore should not be used in a com- mercial environment. The appliance guarantee will be void if the appliance is used within a non domestic environment i.e. a semi commercial, commercial or communal environment. FIRST USE OF THE OVEN It is advised to follow these instructions: ■ Furnish the interior of the oven as described a
ページ4に含まれる内容の要旨
IMPORTANT PRECAUTIONS AND RECOMMENDATIONS After having unpacked the appliance, check to ensure that it is not damaged and that the oven door closes correctly. In case of doubt, do not use it and consult your supplier or a professionally qualified technician. Packing elements (i.e. plastic bags, polystyrene foam, nails, packing straps, etc.) should not be left around within easy reach of children, as these may cause serious injuries. ■ Some appliances are supplied with a protective film on s
ページ5に含まれる内容の要旨
■ Do not scratch the hob with sharp objects. Don’t use the hob as a work surface. ■ WARNING: When correctly installed, your product meets all sa- fety requirements laid down for this type of product category. However special care should be taken around the rear or the underneath of the appliance as these areas are not designed or intended to be touched and may contain sharp or rough edges, that may cause injury. ■ Do not line the oven walls with aluminium foil. Do not place ba- king trays o
ページ6に含まれる内容の要旨
INSTALLATION CAUTION: ■ This appliance must be installed in accordance with these installation instructions. ■ This appliance shall only be serviced by authorised personnel. ■ This appliance is to be installed only by an authorised person in compliance with the current electrical regulations and in observation of the instructions supplied by the manufacturer. Failure to comply with this condition will render the guarantee invalid. ■ Incorrect installation, for which the manufacturer accepts
ページ7に含まれる内容の要旨
Cooker overall dimensions [mm] ■ height: min 900 - max 925 Figure 1 ■ width: 900 ■ depth: 600 7 50 mm 500 mm 650 mm 450 mm
ページ8に含まれる内容の要旨
FITTING THE ADJUSTABLE FEET The adjustable feet must be fitted to the base of the cooker before use (fig. 2). Rest the rear of the cooker on a piece of the polystyrene packaging exposing the base for the fitting of the feet. Fit the no. 4 (four) legs by screwing them tight into the support base as shown in figure 3. LEVELLING THE COOKER The cooker may be levelled by screwing the lower ends of the feet IN or OUT (fig. 4). Figure 2 Figure 3 Figure 4 Figure 5 MOVING THE COOKER WARNING: When rais
ページ9に含まれる内容の要旨
450 450 450 450 450 450 900 mm 900 mm 900 mm Figure 8 ANTI-TILT BRACKET Important! To restrain the appliance and prevent it tipping accidentally, fit a bracket to its rear to fix it securely to the wall. Make sure you also fit the supplied lock pin to the anti-tilt bracket. To fit the anti-tilt bracket: 1. After you have located where the co- oker is to be positioned, mark on the 0 wall the place where the two screws + 25 of the anti-tilt bracket have to be fitted. 0 Please follow th
ページ10に含まれる内容の要旨
ELECTRICAL REQUIREMENTS ■ The appliance must be connected to the mains checking that the voltage correspon- ds to the value given in the rating plate and that the electrical cable sections can withstand the load specified on the plate. ■ A suitable disconnection switch must be incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations. The switch must be of an approved type installed in the fixed wiring and provide a 3 mm air gap contact
ページ11に含まれる内容の要旨
LOCATING THE AREA FOR ELECTRICAL CONNECTION ELECTRIC CONNECTION Dotted line showing the position of the cooker when installed Area for ELECTRIC connection Figure 11 11 max 290 mm
ページ12に含まれる内容の要旨
CONNECTION OF THE POWER SUPPLY CABLE Important! This cooker must be connected to the electricity supply only by an au- thorised person. To connect the feeder cable to the cooker it is necessary to: • Remove the two screws that hold shield “A” behind the cooker (fig. 12). • Open completely the cable clamp “D”. • Fitted with a 6-pole terminal block, position the U bolts onto terminal block ‘B’ (fig. 12) according to the diagrams in figs. 13 - 14. • Feed the supply cable through the cable clamp “D
ページ13に含まれる内容の要旨
Figure 12 Figure 13 230 V~, 240 V~ 230 V~ B 12 3 4 5 L 1 N (L 2) PE D 230 V 3~, 240 V 3~ 230 V 3~ A 12 3 4 5 1 2 3 4 5 1 2 3 4 5 L 1 L 2 L 3 PE N(L2) L3 L2 L1 PE PE L1 230 V~ 230 V 3~ 230 V~, 240 V~ 230 V 3~, 240 V 3~ 400 V 3N~, 415 V 3N~ 400 V 3N~ 12 3 4 5 1 2 3 4 5 N L2 PE L1 L 1 L 2 L 3 N PE 400 V 2N~ 400 V 2N~, 415 V 2N~ 400 V 2N~, 415 V 2N~ 400 V 2N~ 12 3 4 5 1 2 3 4 5 L2 L3 N L1 PE L 1 L 2 N PE 400 V 3N~, 415 V 3N~ Figure 14 400 V 3N~ 13
ページ14に含まれる内容の要旨
ELECTRIC DIAGRAM Figure 15 14 S2 PR S1 1 F1 TM N/7 1a F2 F3 F4 F5 F6 L/8 2 2 2 2 2 4 P1 4 P1 4 4 4 P1 P1 P1 P3 5 PILOT P2 PILOT P2 4a P2 4a P2 PILOT P2 2 S1 S1 S1 S2 S2 S2 S1 S2 S1 S2 P1 1 3 P2 4 LF 2 S H 4 4A 2 S C H 2 S 4 H S H 4 P4 2 S H 4 2 4 G P3 4a P1 P2 P5 CF V S CR TL T 1 2 3 4 5 M
ページ15に含まれる内容の要旨
ELECTRIC DIAGRAM KEY P1/2/5 Hob single zones elements P3 Hob double zone (oval) element P4 Hob double zone element F2/3/6 Energy regulators (single zones) F4/5 Energy regulators (double zones) F1 Oven switch TM Oven thermostat LF Oven lamp PR Oven programmer CF Cooling fan motor V Oven fan motor C Oven top element G Oven grill element S Oven bottom element TL Thermal overload S1 Thermostat pilot lamp S2 Hob elements pilot lamp CR Hob elements residual heat lamps M Termin
ページ16に含まれる内容の要旨
USE AND CARE CAUTION: ■ This appliance must be used only for the task it has explicitly been designed for, that is for domestic cooking of foodstuffs. Any other form of usage is to be considered as inappropriate and therefore dangerous. ■ Do NOT place combustible materials or products on this appliance at any time. Figure 16 USING THE OVEN FOR THE FIRST TIME Operate as follows: ■ Slide in the wire racks on the oven walls as in fig. 16. ■ Slide in the grease filter on the back of the oven as
ページ17に含まれる内容の要旨
GREASE FILTER ■ A special screen is provided at the back of the oven to catch grease particles, mainly when meat is being roasted. ■ Clean the filter after any cooking! The grease filter can be removed for cleaning and should be washed regularly in hot soapy water (fig. 19). ■ Always dry the filter properly before fitting it back into the oven. CAUTION: When baking pastry etc. this filter should be removed. Figure 19 17
ページ18に含まれる内容の要旨
CONTROL PANEL Figure 20 10 9 8 7 6 5 4 3 2 1 Controls description 1. Front right cooking zone control knob 2. Rear right cooking zone control knob 3. Central cooking zone control knob 4. Rear left cooking zone control knob 5. Front left cooking zone control knob 6. Oven temperature control knob 7. Oven function selector control knob 8. Electronic programmer Pilot lamps: 9. Cooking zone/s ON indicator light 10. Oven temperature indicator light Please note: This appliance incorporates a safety coo
ページ19に含まれる内容の要旨
OB VITROCERAMIC HOB Figure 21 4 2 3 1 5 6 VITROCERAMIC COOKING HOB 1. “Hi-Light” single zone, Ø 180 mm 1800 W 2. “Hi-Light” single zone, Ø 145 mm 1200 W 3. “Hi-Light” double zone (oval), Ø 145 x 250 mm 2000/1100 W 4. “Hi-Light” double zone, Ø 210/120 mm 2200/750 W 5. “Hi-Light” single zone, Ø 145 mm 1200 W 6. Cooking zones residual heat indicators Attention: Detach the appliance from the mains if the ceramic glass is cracked and contact the After- Sales Service. Metall
ページ20に含まれる内容の要旨
HOW TO USE THE VITROCERAMIC HOB The ceramic surface of the hob allows a fast transmission of heat in the vertical direction, from the heating elements underneath the ceramic glass to the pans set on it. The heat does not spread in a horizontal direction, so that the glass stays “cool” at only a few centimeters from the cooking plate. The cooking zones are shown by painted disks on the ceramic surface. Before switching on the cooktop make sure that it is clean. Important note: The heating eleme
