Summary of the content on the page No. 1
7020
INSTRUCTION MANUAL
Summary of the content on the page No. 2
® ENERGY STAR Program The ENERGY STAR Program has been established to encourage the widespread and voluntary use of energy-efficient technologies that reduce energy consumption and prevent pollution. With its automatic energy saving features Auto Low Power and Auto Shutoff (see item 6.3 Power Saver Mode) and its automatic duplex function, this product meets the Energy Star guidelines for energy efficiency. The key operator can adjust the interval after which the system goes into power saver mode
Summary of the content on the page No. 3
What KONICA 7020 has to offer: High-Speed Copying 20 A4 or 13 A3 pages per minute. Extensive Paper Supply Equipped with a drawer base unit*, Konica 7020 makes available up to 2,550 sheets in its trays and multi-sheet bypass. Automatic Duplexing Konica 7020 offers high productivity also when duplex copying. Even double-sided originals are processed and reversed auto- matically. Job Memory 15 different copy patterns can be stored and instantly recalled. Touch Screen for Convenient Operation All se
Summary of the content on the page No. 4
Contents 1. Advice on Installation and User Safety ...................................................................................................... 6 1.1 Safety Warnings .................................................................................................................................. 6 1.2 Installation .......................................................................................................................................... 7 1.3 Installation Space ..........
Summary of the content on the page No. 5
Contents 9. Special Functions ...................................................................................................................................... 34 9.1 Image Editing Functions.................................................................................................................. 35 9.1.1 Text / Photo Enhance ...................................................................................................................... 35 9.1.2 Auto Layout ....................
Summary of the content on the page No. 6
1. Advice on Installation and User Safety Dear User, The following concerns the safe use of your new equipment. Please take the time to read the following precautions carefully. 1. ATTENTION: While in use, a high voltage is generated inside 1.1 Safety Warnings the equipment. Do not touch to avoid electrical shock! 2. Do not attempt to repair any parts of this equipment. All repairs must be carried out exclusively by approved Konica service technicians. 3. While in use, some parts inside the unit
Summary of the content on the page No. 7
1. Advice on Installation and User Safety 1.2 Installation An inadequate location of the system can lead to a loss in copy quality and can even damage the equipment. The following should therefore be considered before installing the unit. Also see 1.3 Installation Space for the minimum space requirements of Konica 7020. 1. The location of the equipment must be level and must not be subject to vibration. 2. The unit should only be installed in surroundings which are dry, clean and well ventilated
Summary of the content on the page No. 8
1. Advice on Installation and User Safety 1.3 Installation Space Basic Model with Basic Pedestal* 550 200 100 550 595 590 500 730 1577 245 1027 1190 1345 System with RADF*, DB-Unit (DB-209)* and Finisher* 550 200 550 595 590 500 450 1577 730 245 1172 1027 875 1345 1540 All dimensions in mm 8
Summary of the content on the page No. 9
2. Main Components 2.1 External Machine Original Insertion in RADF* RADF* On / Off Copier Function Finisher* Multi-Sheet Bypass Tray Front door 50 Sheets A5R – A3 Main power switch see below Tray 1: Universal Tray Right Side Paper Conveyance for 500 Sheets A5R – B4 Tray 2: Universal Tray for 500 Sheets A5R – A3 DB-Unit DB-209* with Trays 3 and 4: Universal Trays, each for 500 Sheets A5R – A3 Release Button Original Cover Main Power Switch For easier manual copying, separate the RADF by pressing
Summary of the content on the page No. 10
2. Main Components 2.2 Internal Machine Writing unit glass cleaning knob Finisher knob Toner bottle cover Corona wire cleaning knob Developing unit Fixing unit guide Transfer/Separator wire cleaning lever Conveyance unit cover ADU 10
Summary of the content on the page No. 11
2. Main Components 2.3 Standard/Optional Equipment Finisher Exit Trays RADF DF-314 Platen cover FT-107 Print Server EasyCom Xpress FaxKit (FK-101) Network Interface Card (KN-304) Print Controller Network (IP-011) Interface Card Finisher (KN-303) FS-107 The finisher can be equipped with up to 4 exit trays Print HDD (HD-103) Controller (IP-421) Main body PostScript 3 Option (PS-341) DK-109 DB-209 DB-409 Basic Pedestal with 2 trays for with LCT for 1,500 sheets 500 sheets each (A4/A4R) 11
Summary of the content on the page No. 12
3. All Functions at a Glance DATA SCANNER / PRINTER FAX COPY HELP 1 2 3 INTERRUPT CHECK 4 56 APPLICATION STOP/CLEAR 7 89 OUTPUT 0 START CLEAR QTY. AUTO RESET 3.1 Operation Panel Help Output Activates a general help menu or Activates the Output Mode Screen, in detailed user instructions for a selected which finishing functions are selected (exit function. tray, sort, group, staple mode) HELP OUTPUT Check Auto Reset All user selections are displayed. Restores initial settings. CHECK AUTO RESET App
Summary of the content on the page No. 13
3. All Functions at a Glance LCD Touch Screen displays machine and copying status, help information, interactive screens, and touch keys for function selections. Depending on the service adjustment, additional status information is displayed: Automatic Rotation Sort Add Toner Routine maintenance Copy Preselection Counters Numeric keypad to enter copy Displays the counter list screen. 1 2 3 quantity, user codes, numeric values for various functions and to read 4 56 counters. Clear Quantity 7 89 C
Summary of the content on the page No. 14
3. All Functions at a Glance 3.2 The Touch Screen The interactive touch screen serves to enter all software selec- tions, which are then shown in the display. Functions are selected with the soft keys. Selections are shown automatically resp. after calling up the Check screen. Soft keys, which can be activated in the LCD, show a dark shadow underneath and on the right of the key. Keys of activated functions are shown inverted, i.e. in black with white text. Keys of functions, which are not avai
Summary of the content on the page No. 15
3. All Functions at a Glance 3.2.2 The Application Selection Screen The APPLICATIONS hard key calls up the screen for the special functions. In this screen Store Mode can be selected (page 25). The JOB MEMORY key (page 32) activates the Job Memory for programming and retrieval of complete copy patterns. The following functions can be selected: FILE EDIT Sheet / Cover Insertion To program positions for covers and inserts (page 39). OHP Interleave To copy OHP films with inserts (page 40). Chapter
Summary of the content on the page No. 16
4. The Help Function 4.1 The Help Key The HELP hard key calls up varied help information. General information regarding the functions is available, as well as detailed user instructions, explaining the operation proce- dures step by step. There are two ways to call up the required information: 1. Press HELP, while the basic screen is displayed in the LCD, to call up the Basic Help screen. Press any of the soft keys (e.g. RADF, etc.) for detailed information on the relevant copier part. Pressing
Summary of the content on the page No. 17
A4 5. How to Supply Paper, Toner, Staples This section contains information regarding the paper trays, how to refill toner and replace staples. 5.1 Supply Paper General This system is equipped with up to 4 paper trays and a multi- sheet bypass. If paper of a certain size has been used up, the corresponding paper size indicator on the screen will fade. The Symbol appears on the display and blinks whenever the chosen paper tray is empty. Press the HELP key, while the basic screen is display
Summary of the content on the page No. 18
5. How to Supply Paper, Toner, Staples Loading Paper in DB-409* 1. Withdraw the tray from the unit as far as it will go. 2. Fan the paper before inserting it! 3. Stack paper into the tray with the curly side up. Paper must not be stacked higher than the red mark. If trays are over- stacked, the system might not copy! 4. Push the paper into the unit. Do not change copy size! Multi-Sheet Bypass The sheet bypass is located on the right of the unit. Paper in sizes A3 to A5R can be processed, as well
Summary of the content on the page No. 19
5. How to Supply Paper, Toner, Staples 3. Withdraw the toner bottle, then turn it clockwise to position the mark 5 at the top. 2 4. Fully withdraw the toner bottle straight toward the front and dispose it. 1 5. Remove the cap of the new toner bottle. 1 2 6. Insert the new toner bottle, positioning the 5 mark at the top. 2 7. Close and lock the toner bottle cover, then close the front door. The procedure how to refill toner is of course also explained in the help function. 2 1 19
Summary of the content on the page No. 20
5. How to Supply Paper, Toner, Staples 5.3 Supply Staples If the staple cartridge is empty, a warning message appears. Please only use original Konica staple cartridges as a refill! To access the display shown, press OUTPUT key first, then STAPLE SET. Press ADD STAPLER now. The staple cartridge now moves into a position at the finisher* front door. The display shows a warning sign. Do not open the finisher front door before the check stapler screen is displayed. Push the two green levers togethe
