Our goal is to provide you with a quick access to the content of the user manual for Lexmark X642. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Lexmark X642.
If looking through the Lexmark X642 user manual directly on this website is not convenient for you, there are two possible solutions:
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Lexmark X642 but the selected pages only. paper.
Below you will find previews of the content of the user manuals presented on the following pages to Lexmark X642. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
� � � � � �
� � � � � �
Your MarkNet N8000 series internal print
Solving printing problems
server is not set up properly or is not
The operator panel display is blank
Verify that you have properly configured the printer
for network printing.
Turn the printer off, wait about 10 seconds, and turn
the printer back on.
See the drivers CD or the Lexmark Web site for
If the Ready message does not appear, turn the
� � � � � � � Note: Setting Collation to Off in the If the suggested corrective action does not fix the Page Protect is set to On driver overrides the setting in the problem, call your service representative. Set Page Protect to Off from the Setup Menu. Finishing Menu. For more information, see the Menus and Messages See the Menus and Messages Guide for more Option Action Guide. information. Drawers • Make sure the connection between drawers (250-sheet drawer, 500-sheet Job prints from the w
� � � � � � � � � � � � � � � � � Consistent misfeeds or jams in the Guides in the selected tray are not set to Solving 2000-sheet drawer drawer the appropriate position for the size problems paper loaded. Try the following: Move the guides in the tray to the correct position. The elevator tray does not raise when Flex the paper. the loading door is closed, or the Turn the print media over. The paper has absorbed moisture due to elevator tray does not lower when the Check the following: h
� � � � � � � � � � � � � � � � � � repeating defects are not appearing, print the Print the cartridge. Repeat this procedure multiple Toner fog or background shading Quality Test Pages. times until the print remains faded. When the appears on the page print remains faded, replace the print cartridge. Change the Toner Darkness setting in the Printing the print defects guide Quality menu. 1 Touch the help icon (?). Change the Brightness setting in the Quality 2 Touch Print Defects Guide. men
� � � � � � � � � � � � � � � � � � � � � Streaks appear on the page Characters have jagged or uneven The job prints, but the top and side edges margins are incorrect The toner may be low. To utilize the remaining toner, remove the cartridge by gripping the Change the Print Resolution setting in the Make sure the Paper Size setting in the Paper handles with both hands. With the cartridge Quality menu to 600 dpi, 1200 Image Q, menu is correct. arrows pointing downward, firmly shake the 1200
� � � � � � � � � � � � � � � � � Touch the left arrow to remove more shadow Solving copy quality Solving fax problems detail. problems The fax document takes a long Solving scan quality time to transmit Unwanted background is visible Touch Options, then under Content, change the problems Adjust the Background Removal setting under setting to Text, and then set the resolution to Copy Options Advanced Imaging. Touch the Standard. right arrow to remove more background. The file size is
|1||Lexmark 131||All in One Printer||35|
|2||Lexmark 13B0501||All in One Printer||21|
|3||Lexmark 13B0502||All in One Printer||34|
|4||Lexmark 13B0503||All in One Printer||38|
|5||Lexmark 133||All in One Printer||29|