LG Electronics 29FS2AMB/ANX user manual

User manual for the device LG Electronics 29FS2AMB/ANX

Device: LG Electronics 29FS2AMB/ANX
Size: 6,30 MB
Date of adding : 2014-05-10 15:04:10
Number of pages: 40
Print the manual


How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for LG Electronics 29FS2AMB/ANX. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with LG Electronics 29FS2AMB/ANX.

For your convenience

If looking through the LG Electronics 29FS2AMB/ANX user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manualLG Electronics 29FS2AMB/ANX on full screen, use the buttonFullscreen.
  • Downloading to your computer - You can also download the user manual LG Electronics 29FS2AMB/ANX to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
LG Electronics 29FS2AMB/ANX user manual
« Page 1 of 40 »
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual LG Electronics 29FS2AMB/ANX but the selected pages only. paper.


Below you will find previews of the content of the user manuals presented on the following pages to LG Electronics 29FS2AMB/ANX. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1


Summary of the content on the page No. 2

CONTENTS CONTENTS .............................................................................................. 2 SAFETY PRECAUTIONS ..........................................................................3 CONTROL DESCRIPTIONS .................................................................... 4 SPECIFICATIONS .................................................................................... 7 ADJUSTMENT INSTRUCTIONS ............................................................. 8 TROUBLE

Summary of the content on the page No. 3

SAFETY PRECAUTIONS IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Replacement Parts List. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. General Guidance Befor

Summary of the content on the page No. 4

CONTROL DESCRIPTIONS All the functions can be controlled with the remote control handset. Some functions can also be adjusted with the buttons on the front panel of the set. Remote control handset POWER MUTE Before you use the remote control handset, please install the bat- teries. See the next page. 1 12 1 23 1. POWER 4 56 switches the set on from standby or off to standby. 2 7 89 2. NUMBER BUTTONS switches the set on from standby or directly select a number. ARC 0 TV/AV 3 13 MENU 3. ARC (Aspec

Summary of the content on the page No. 5

14. MENU POWER selects a menu. MUTE 1 12 15. LIST 1 23 displays the programme table. 4 56 16. SSM (Sound Status Memory) 2 recalls your preferred sound setting. 7 89 17. EYE/ (option) ARC 0 TV/AV * switches the eye function on or off. 3 13 MENU SOUND PICTURE 18. Q.VIEW 4 14 returns to the previously viewed programme. OK T U R B O 19. INDEX/ (option) * PR switches DISPLAY on or off. VOL VOL 5 PR 20. PIP BUTTONS (option) PIP REW PLAY FF switches the sub picture on or off. PR +/- 6 FAVOURIT

Summary of the content on the page No. 6

S-VIDEO VIDEO L/MONO AUDIO R Front panel 8 3 6 4 ON/OFF 1 Side panel 2 5 7 1. MAIN POWER (ON/OFF) 7. EYE (option) switches the set on or off. adjusts picture according to the surrounding conditions. 2. POWER/STANDBY INDICATOR illuminates brightly when the set is in standby 8. HEADPHONE SOCKET (option) mode. Connect the headphone plug to this socket. dims when the set is switched on. 3. MENU selects a menu. 4. OK accepts your selection or displays the current mode. F F / G G (Volume Down/Up) a

Summary of the content on the page No. 7

SPECIFICATIONS Note : Specification and others are subject to change without notice for improvement. A Scope A Test Condition This specification can be applied to all the television related to 1) Temperature : 20 ± 5 (CST : 40 ± 5 ) MC-05HA Chassis. 2) Relative Humidity : 65 ± 10% 3) Power voltage : 110-240V~, 50/60Hz 4) Follow each drawing or spec for spec and performance of A Test and Inspection Method parts,based upon P/N of B.O.M 1) performance : Follow the Standard of LG TV test 5) Warm

Summary of the content on the page No. 8

ADJUSTMENT INSTRUCTIONS 8) After checking ‘40’, Click the Erase Flash button. 1. Application Object These instructions are applied to all of the color TV, MC-05HA chassis. 2. Notes (1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order.But the adjustment can be changed by consideration of mass production. (3) The adjustment must be per

Summary of the content on the page No. 9

12) Download the file with ‘OK’ button. 7. Purity & Convergence adjustment Adjustment should be operated when using the CPT(without ITC from CPT manufacturing place) This adjustment must be done in the order of the following flowchart. As preparatory operations before CPT Assembling assembling CPT, wind cotton Tape for protecting to CPT NECK and DY, CPT connection parts. At this moment, end of tape should be over-lapped and wound in direct route to the NECK. 13) Check download process(about 30~4

Summary of the content on the page No. 10

(5) Open angle of the two tab of 6 pole magnet by isogonic f. Check the adjusted color coordinates with white balance angle and accord with vertical line of Red/Blue and Green. meter. (6) Maintain as angle of (5) and rotate the tab to accord with Color Temperature X coordinate Y coordinate horizontal line. In case of twisted horizontal line,repeat adjustment of (3) ~ (5) remembering the movement of 13500K 266± 8 273 ± 8 Non EU Red/Green/Blue color. (7) Move the DY to best condition of convergenc

Summary of the content on the page No. 11

Summary of the content on the page No. 12

BOW 10. Deflection Data Adjustment In line adjustment, not to change default value is basic. - Manual adjustment can be done by the following procedure. ANG 10-1. Preliminary steps In angle adjustment, adjust until inclination of center vertical line 1) Set the Deflection data with the remote controller. should be vertical precisely. 2) Enter the Adjustment mode by pressing the ADJ button. EP (East-West Parabola) 3) Select the “DEFLECT” to adjust Deflection Data. Adjust so that middle portion of

Summary of the content on the page No. 13

11. Deflection setting initial data 13. OPTION setting RF PAL RF NTSC 13-2. Preliminary steps ITEM Range 1080i/50 100Hz 1080i/50 1) This option adjustment decides function in accordance with model. Press the SVC TX adjustment button(CH up/down VL 0 ~ FFFF FFFC FFF3 FFDD button) at SVC mode, then adjust the option at OPTION1, 2, VA 0 ~ FFFF 004E 0014 002A 3, 4, 5 mode. SC 0 ~ FFFF 009E 009E 007C 2) Mark the option adjustment data like [111,111,111,111,111] VS 0 ~ FFFF FFF8 FF10 0003 in BOM. HS 0

Summary of the content on the page No. 14

OPTION 1 Option Code Function Remark 1 TEXT (2bit, 3: WITH CAPTION(CANADA) 3: CANADA Caption, 2: WITH CAPTION 2: OTHER NTSC AREA 200PR) 1: W/TXT & 200 PROGRAM 1: Other country 0: W/O TXT & 200 PROGRAM 0: china only 2 VCTP 0: BASIC 0: VCTP Basic Version 1: ECO 1: VCTP ECO Version * Fixed by MICOM VERSION 3 TOP 1: TOP + FLOF TEXT 1: Dutch/ Swiss/ Austria/ Sweden/ Norway/Finland/ Poland/ Italy/ Spain/ Benelux3 0: FLOF TEXT 0: Others 4 ACMS 1: WITH CHANNEL NAME DISPLAY 1:ALL COUNTRIES EXCE

Summary of the content on the page No. 15

OPTION 3 Option Code Function Remark 1 SCART 3: READY 3: no use 2: 2 SCART(SC ID enable + SC_RGB(soft mix)+sav2) 2: 2 scart 2 1: 1 SCART(SC ID enable + SC_RGB(soft mix)) 1: 1 scart + 1 phone 0: WITHOUT SCART JACK(ALL PHONE JACK) 0: ALL PHONE JACK 3 WIDE 1: 16:9 TV 1: Wide Model 0: 4:3 TV 0: 4:3 model 4 NCOMP 1: COMPONENT 1/2 1: no use (number of component) 0: COMPONENT 1 0: ALL 5 3DCOM 1: WITH 3D-COMB FILTER 1: Basic VCTP(PIP model) 0: WITHOUT 3D-COM FILTER(WITH 4H-FILTER) 0: Eco VCTP(

Summary of the content on the page No. 16

OPTION5 Option Code Function Remark C/PTV 1: W/ CVG(PTV) 1: no use 1 0: W/O CVG(CTV) 0: ALL * Fixed by MICOM version AUTOCVG 1: WITH AUTO CONVERGENCE 1: no use 2 0: WITH 9 POINT CONVERGENCE 0: ALL 32 INCH 1: 32 INCH 1: no use 3 0: OTHERS 0: ALL HOTEL 1: WITH HOTEL FUNCTION 1: Limit MAX VOL Level, CH EDIT 4 0: WITHOUT HOTEL FUNCTION 0: EYE 1: WITH DIGITAL EYE 1: no use(READY) 5 0: WITHOUT DIGITAL EYE 0: ALL TBIDX 1: WITH TURBO THEATER INDEX 1: FB90/FC40 index option 6 0: WITHOUT TURBO T

Summary of the content on the page No. 17

TROUBLE SHOOTING 1. No Picture (sound ok) CVBS Signal? Check MAIN R118 Waveform (2Vpp) YES NO NO Waveform of Digital Board IC001 Check Q003 Check Tuner(TU101) VIDEO output #191? YES NO Waveform of Digital Board IC500 Check around IC500 R/G/B/VM OUT0~#65~68? YES NO Waveform of Digital Board IC500 Check around IC500 #41, 42, 43, 44? YES NO Waveform of Digital Board P500 Check around Q505, Q506, Q507 #R/G/B_OUT? YES NO Waveform of CPT socket cathode Check IC901G (RK/GK/BK)? 2. No Sound (picture ok

Summary of the content on the page No. 18

3. No PIP NO Waveform of Digital Board Check Waveform of MAIN1 Waveform of Digital IC001 #189, 182, 188? AV JACK1 Q101(E)? Board IC510 #51, 52, 53, 46? NO YES Check TU102 YES YES Check Digital Board IC510 #2 NO Check Q510 NO Waveform of Digital Board Check Digital Board IC001 #195? IC001 NO YES Check Scart Jack YES SCART201 NO Waveform of Digital Board Check around IC510 IC510 #19~22, 24~28? YES NO Waveform of Digital Board Check around IC001 IC001 #165~167? 4. No power

Summary of the content on the page No. 19

5. No raster Check +B voltage 125 ~ 135V or OK 0V NO OPEN Is the voltage at VCC of IC001 Check F1701 Fuse ST_1.8V and ST_3.3V? on PSW Board YES OK Check/ Replace F1771 Check ST_Voltage 0V Does the square Check the voltage of NO YES waveform from PIN C1806 23 of IC500 appear Check/ YES Check/ Replace D1810 Check IIC bus Replace IC500 lime (SDA, SAC) Is the waveform at 0V NO Drain Q408 normal? Check the voltage at pin2 of IC801 Check/ Replace Q422, T402 Check/ Replace IC810 Check the voltage at

Summary of the content on the page No. 20


Similar user manuals
# User manual Category Download
1 LG Electronics 30FZ1DC CRT Television 19
2 LG Electronics 32FZ4D-UA CRT Television 36
3 LG Electronics 32-3DCH-UA CRT Television 38
4 LG Electronics 30FZ1DC, 32FZ1DC-UB CRT Television 11
5 LG Electronics Color TV CT-25 CRT Television 23