Kodak EASYSHARE DX6340 user manual

Summary of the content on the page No. 1

Using Kodak EasyShare Cameras

Josh Burker | josh_burker@misd.wednet.edu
October 2005

The Kodak EasyShare DX6340 is a digital still camera. These instructions will walk you through
the basics of using the camera.

Begin by turning on the camera. You move the mode dial clockwise to the Auto position to turn
on the camera.


The Ready light will blink green as the camera warms up and performs diagnostic checks.
When the Ready light glows solid green the camera is ready to take p

Summary of the content on the page No. 2

Make sure the camera is powered on by turning the mode dial to Auto. If you wish you may turn on the display on the back of the camera by pressing the OK button in the middle of the mode dial. Otherwise, frame your subject in the viewfinder on the back of the camera. The camera is equipped with an optical zoom that allows you to get “closer” to your subject. The optical zoom is most effective when you are at least 20 inches from your subject. When the camera is first powered on the l

Summary of the content on the page No. 3

When you are ready to take your picture press the shutter button halfway down. This sets the exposure as well as the focus. When the ready light glows solid green you may press the shutter button completely down to take the photo. After you take a photograph the image is displayed on the camera’s screen for five seconds. While the picture is displayed there are a few options you may take. If you take no action the picture will be saved to the camera’s memory. You may choose to de

Summary of the content on the page No. 4

After downloading your photos to from the camera to your computer and before you return the camera you should charge the camera’s battery. This gets the camera ready for the next person who uses it. The camera charges on the included Camera Dock. Make sure the camera is powered off by turning the mode dial to OFF. Match the alignment pins and the connector on the Camera Dock to the camera. Push down the camera until it is secure. Plug the AC adapter into the back of the Camera