Summary of the content on the page No. 1
OIL-X EVOLUTION
The most energy efficient
compressed air filters
in the world
www.domnickhunter.com
Summary of the content on the page No. 2
COMPRESSED AIR - THE 4TH UTILITY COMPRESSED AIR IS A SAFE AND RELIABLE POWER SOURCE THAT IS WIDELY USED THROUGHOUT INDUSTRY. APPROXIMATELY 90% OF ALL COMPANIES USE COMPRESSED AIR IN SOME ASPECT OF THEIR OPERATIONS, HOWEVER UNLIKE GAS, WATER AND ELECTRICITY, COMPRESSED AIR IS GENERATED ON-SITE, GIVING THE USER RESPONSIBILITY FOR AIR QUALITY AND OPERATIONAL COSTS. COMPRESSED AIR IS NOT WITHOUT IT’S PROBLEMS, WITH ALL SYSTEMS SUFFERING FROM PERFORMANCE AND RELIABILITY ISSUES. ALMOST ALL OF THESE C
Summary of the content on the page No. 3
ARE ALL COMPRESSED AIR FILTERS THE SAME? COMPRESSED AIR PURIFICATION EQUIPMENT IS ESSENTIAL TO ALL MODERN PRODUCTION FACILITIES. IT MUST DELIVER UNCOMPROMISING PERFORMANCE AND RELIABILITY WHILST PROVIDING THE RIGHT BALANCE OF AIR QUALITY WITH THE LOWEST COST OF OPERATION. TODAY, MANY MANUFACTURERS OFFER PRODUCTS FOR THE FILTRATION AND PURIFICATION OF CONTAMINATED COMPRESSED AIR, WHICH ARE OFTEN SELECTED ONLY UPON THEIR INITIAL PURCHASE COST, WITH LITTLE OR NO REGARD FOR THE AIR QUALITY THEY PROV
Summary of the content on the page No. 4
AIR QUALITY THE DOMNICK HUNTER OIL-X EVOLUTION RANGE OF COMPRESSED AIR FILTERS HAS BEEN DESIGNED FROM THE OUTSET TO MEET THE REQUIREMENTS OF ISO 8573.1 : 2001, THE INTERNATIONAL STANDARD FOR COMPRESSED AIR QUALITY, WHEN VALIDATED IN ACCORDANCE WITH THE REQUIREMENTS OF ISO 12500, THE INTERNATIONAL STANDARD FOR FILTER TESTING AND THE TEST METHODS OF ISO 8573.2, ISO 8573.4 AND ISO 8573.5. Correct selection of filtration media OIL-X EVOLUTION coalescing filters utilise four drainage methods Coalesc
Summary of the content on the page No. 5
ENERGY EFFICIENCY ANY RESTRICTION TO AIRFLOW WITHIN A FILTER HOUSING / ELEMENT WILL REDUCE THE SYSTEM PRESSURE. TO GENERATE COMPRESSED AIR, LARGE AMOUNTS OF ELECTRICAL ENERGY IS REQUIRED, THEREFORE ANY PRESSURE LOST WITHIN THE SYSTEM CAN BE DIRECTLY CONVERTED INTO A COST FOR WASTED ENERGY. THE HIGHER THE PRESSURE LOSS, THE HIGHER THE ENERGY COSTS. Pressure loss in a compressed air filter is a combination of fixed pressure losses and incremental pressure losses. Fixed pressure losses come from t
Summary of the content on the page No. 6
ADVANCED FILTER HOUSINGS OIL-X EVOLUTION FILTER HOUSINGS HAVE BEEN DESIGNED TO PROVIDE SIMPLE INSTALLATION, LONG HOUSING LIFE AND REDUCED MAINTENANCE TIMES. THE UNIQUE DESIGN OF THE OIL-X EVOLUTION FILTER PROVIDES MORE PORT SIZES FOR FLEXIBILITY AND ENSURES SERVICE TECHNICIANS DO NOT HAVE TO CONTACT CONTAMINATED ELEMENTS DURING MAINTENANCE. Filter connections More port sizes are available to match both pipe size and system flow rate giving additional customer choice and reduced inistallation
Summary of the content on the page No. 7
MAINTAINING AIR QUALITY AND ENERGY EFFICIENCY THROUGH REGULAR MAINTENANCE IT HAS LONG BEEN THE PRACTICE TO CHANGE FILTER ELEMENTS BASED UPON THE PRESSURE DROP MEASURED ACROSS THE FILTER AS THIS IS DIRECTLY ATTRIBUTABLE TO OPERATIONAL COSTS. HOWEVER, ONE MUST REMEMBER THE REASON FOR INSTALLING THE FILTER IN THE FIRST PLACE, i.e. TO REMOVE CONTAMINATION. FILTER ELEMENTS MUST ALWAYS BE REPLACED IN ACCORDANCE WITH THE MANUFACTURERS INSTRUCTIONS TO ENSURE THE DELIVERED AIR QUALITY IS NEVER COMPROMISE
Summary of the content on the page No. 8
ISO 8573 – COMPRESSED AIR QUALITY STANDARDS ISO 8573 IS THE GROUP OF INTERNATIONAL STANDARDS RELATING TO THE QUALITY OF COMPRESSED AIR AND CONSISTS OF NINE SEPARATE PARTS. PART 1 SPECIFIES THE QUALITY REQUIREMENTS OF THE COMPRESSED AIR AND PARTS 2 – 9 SPECIFY THE METHODS OF TESTING FOR A RANGE OF CONTAMINANTS. ISO 8573.1 : 2001 is the primary document used from the ISO 8573 series and it is this document which allows the user to specify the air quality or purity required at key points in a comp
Summary of the content on the page No. 9
OPTIMISED SYSTEM DESIGN FOR TYPICAL APPLICATIONS THE QUALITY OF AIR REQUIRED THROUGHOUT A TYPICAL COMPRESSED AIR SYSTEM CAN VARY. THE EXTENSIVE RANGE OF PURIFICATION EQUIPMENT AVAILABLE FROM DOMNICK HUNTER ALLOWS THE USER TO SPECIFY THE QUALITY OF AIR FOR EVERY APPLICATION, FROM GENERAL PURPOSE RING MAIN PROTECTION, THROUGH TO CRITICAL CLEAN DRY AIR (CDA) POINT OF USE SYSTEMS. DOMNICK HUNTER HAS COMPREHENSIVE RANGES OF PURIFICATION EQUIPMENT AVAILABLE TO EXACTLY MATCH SYSTEM REQUIREMENTS, ENSURI
Summary of the content on the page No. 10
Filtration grades WS AO AA ACS OVR AR AAR Filter Type Bulk Liquid Removal Coalescing Coalescing Oil Vapour Removal Oil Vapour Removal Dry Particulate Dry Particulate Particle removal N/A Down to 1 micron Down to 0.01 micron N/A N/A Down to 1 micron Down to 0.01 micron (inc water & oil aerosols) 3 3 3 3 Max Remaining Oil 0.6 mg/m 0.01 mg/m 0.003 mg/m 0.003 mg/m N/A N/A N/A Content at 21°C (70°F) 0.5 ppm(w) 0.01 ppm(w) 0.003 ppm(w) 0.003 ppm(w) Filtration Efficiency >92% 99.925% 99.9999% N/A N/A 9
Summary of the content on the page No. 11
Technical data Max Operating Pressure Max Recommended Min Recommended Filter Grade Filter Models bar g psi g Operating Temp Operating Temp AO 005 F - 055 F 16 232 80ºC 176ºF 1.5ºC 35ºF AO 005 M - 055 M 20 290 100ºC 212ºF 1.5ºC 35ºF AA 005 F - 055 F 16 232 80ºC 176ºF 1.5ºC 35ºF AA 005 M - 055 M 20 290 100ºC 212ºF 1.5ºC 35ºF AR 005 M - 055 M 20 290 100ºC 212ºF 1.5ºC 35ºF AAR 005 M - 055 M 20 290 100ºC 212ºF 1.5ºC 35ºF ACS 005 M - 055 M 20 290 50ºC 122ºF 1.5ºC 35ºF Weights and dimensions A B C We
Summary of the content on the page No. 12
dh, domnick hunter, OIL-X, OIL-X EVOLUTION, TETPOR, PNEUDRI and VALAIRDATA are registered trademarks of Parker Hannifin ltd. Parker Hannifin ltd, domnick hunter division has a continuous policy of product development and although the Company reserves the right to change specifications, it attempts to keep customers informed of any alterations. This publication is for general information only and customers are requested to contact your domnick hunter sales representative for detailed information
