Summary of the content on the page No. 1
Summary of the content on the page No. 2
FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against ha
Summary of the content on the page No. 3
This product contains electrical or electronic materials. The presence of these materials may, if not disposed of properly, have potential adverse effects on the environment and human health. Presence of this label on the product means it should not be disposed of as unsorted waste and must be collected separately. As a consumer, you are responsible for ensuring that this product is disposed of properly. To find out how to properly dispose of this product, please go to www.polaroid.com and click
Summary of the content on the page No. 4
SAFETY INSTRUCTIONS Please read all Warnings and Cautions before using this product. Warnings If foreign objects or water enter the camera, turn the power off and remove the battery. Continued use may cause personal injury. Please consult our friendly customer service. If the camera has been dropped or its case has been damaged, turn the power off and remove the battery. Continued use may cause personal injury. Please consult our friendly customer service. Do not disassemble, change or repair
Summary of the content on the page No. 5
Cautions Insert the battery properly paying careful attention to the polarity (+ or –) of the terminals. Inserting the battery with its polarities inverted may cause damage to the product, injury, or damage to the surrounding areas due to the battery leaking. Do not fire the flash close to anyone’s eyes. This may cause damage to the person’s eyesight. Do not subject the LCD display to impact. This may damage the glass on the screen or cause the internal fluid to leak. If the internal fluid comes
Summary of the content on the page No. 6
Notes on Battery Usage When you use the battery, carefully read and strictly observe the Safety Instructions and the notes described below: Use only the specified battery (3.7V). Avoid extremely cold environments as low temperatures can shorten the battery life and reduce camera performance. When you are using a new rechargeable battery or a rechargeable battery that has not been used for an extended period of time (a battery that passed the expiry date is an exception), it may affect the num
Summary of the content on the page No. 7
Important Information on Underwater Instructions Before using the camera underwater, please make sure to read the following the instructions carefully. Before Using in Water: 1. Make sure there is no foreign material such as dirt or sand on the waterproof seal of the battery/SD card door. Water, dirt, or sand may cause failure of the camera’s waterproof function. 2. Carefully inspect the waterproof seal of the battery/SD card door for damage (cuts, tears, dents, and any other imperfection).
Summary of the content on the page No. 8
6. If you need to change the battery or SD card after using the camera underwater, make sure the camera is completely clean and dry. Open the battery/SD card door with the battery compartment facing downward. Wipe off remaining water along the battery/SD card door to prevent moisture to go inside. 7. If the waterproof seal of the battery/SD card door has been contacted with salt water, make sure to use fresh water to rinse the camera and wipe it dry to avoid damage. 8. When cleaning the ca
Summary of the content on the page No. 9
CONTENTS 9 INTRODUCTION 30 MENU OPTIONS 9Overview 30 Capture Menu 9 Package Contents 33 Video Menu 34 Playback Menu 10 GETTING TO KNOW YOUR 35 Setup Menu CAMERA 10 Front View 37 TRANSFERRING FILES TO 10 Rear View YOUR COMPUTER 11 Button Operation 37 Downloading Your Files 12 User Interface 38 USING THE CAMERA AS A PC 14 GETTING STARTED CAMERA 14 Preparation 39 EDITING SOFTWARE 15 Charging the Battery INSTALLATION 16 Initial Settings 40 SPECIFICATIONS 18 CAPTURE MODE 41 APPENDIX 18 Capturing
Summary of the content on the page No. 10
INTRODUCTION Overview Congratulations on your purchase of your new Polaroid digital camera. Capturing high-quality digital images is fast and easy with this state-of-the-art smart camera. Equipped with a 8.0-megapixel CCD, this camera is capable of capturing images with a resolution of up to 3264 x 2448 pixels. This digital camera is also waterproof and allows you to capture images underwater for 60 minutes at depths up to 30ft/10m. Package Contents Carefully unpack your camera and ensure that
Summary of the content on the page No. 11
GETTING TO KNOW YOUR CAMERA Front View 1. Shutter button 2 1 3 4 5 2. Power button 3. Flash 4. Self-timer LED 5. Lens 6. Microphone 6 Rear View 7. LCD display 8. Status LED 9. Hand strap holder 10.Tripod socket 11. Battery/SD card door 12.Waterproof seal 13.Battery compartment 14.Memory card slot 15.USB or AV out terminal EN-10 8 7 9 10 11 15 14 13 12
Summary of the content on the page No. 12
Button Operation 1 2 3 10 4 SET 9 5 8 7 6 Function Item 8 Capture Mode 6 Video Mode 7 Playback Mode 1. >: Zooms out >: Zooms out >: Thumbnail =: Zooms in =: Zooms in =: Zooms in 2. Switches to: Switches to: Still image: Switches to video mode > scene mode scene mode selection capture mode selection screen screen > capture mode Video clip: Switches to video mode 3. Switches to playback Switches to playback Still image: Switches to mode mode capture mode Video clip: Switches to video mode
Summary of the content on the page No. 13
User Interface Capture mode 1 2 3 1. Zoom status 18 2. Flash mode P x x4.0 4.0 [Blank]Auto Flash 17 qq 4 m [a] Always ON 16 5 [d] Flash Off 15 6 [c] Red-eye Reduction 14 7 [`] Slow Sync 8 13 + 0.3 [_] Pre-flash 2008 / 01 / 01 00 : 00 2008 / 01 / 01 00 : 00 00001 00001 3. Battery level 11 10 9 [l] Full battery power 12 [o] Medium battery 11. Self-timer icon 18. Scene mode power [f] 2 sec. [W] Smile Detection [n] Low battery power [g] 10 sec. [Z] UW -Normal [m] No battery power [h]
Summary of the content on the page No. 14
Video mode [B] 1. Zoom status 1 2 3 2. Flash mode 3. Battery level 12 x4.0 x x4.0 4.0 4. Storage media 4 11 5. Main focus area 6. Video quality 5 7. Video resolution 8. Available recording time/Elapsed time during 6 recording 7 00 : 21 00 : 21 9. Self-timer icon 10. Date and time 10 9 8 11. Focus setting 12. Mode icon Playback mode [7] - Still image playback 1 2 1. Voice memo 2. Battery level 15 :Play :Play 3. Storage media 3 14 4. Histogram 4 5. Image quality 13 6. ISO 5 12 F F 7. Image
Summary of the content on the page No. 15
GETTING STARTED Preparation 1. Attach the camera’s hand strap as shown in the illustration. 2. Open the camera’s battery/SD card door. 3. Insert the supplied battery in the correct orientation as shown. 4. Insert a SD/SDHC memory card (Optional). The camera has 32MB internal memory (28MB available for image storage), but you can load an SD/SDHC memory card (We recommend the use of a Polaroid SD card - purchased separately - up to 8GB) to expand the camera’s memory capacity. Be sure to format
Summary of the content on the page No. 16
Charging the Battery You must fully charge your battery before the initial use of your camera. 1. Insert the battery into the battery charger. 2. Connect the power cord to the charger and 1 insert the plug into a wall outlet. The status LED on the charger is red 2 when charging and is green when charging is completed. The LED is green if no battery is present in the charger. Charging time varies according to the ambient temperature and the age of the battery. Remove the battery after charging
Summary of the content on the page No. 17
Initial Settings Setting the Date and Time The date/time needs to be set when: The camera is turned on for the first time. The camera is turned on after leaving the camera without the battery for an extended period of time. When the date and time information is not displayed on the LCD display, follow these steps to set the correct date and time. 1. Toggle the MODE button to [8] or [B]. 2. Press the MENU button. 3. Select [Setup] with the button. 4. Select [Date/Time] with the / buttons, an
Summary of the content on the page No. 18
Choosing your Language Specify what language the menus and messages are to be displayed on the LCD display. 1. Toggle the MODE button to [8] or [B]; or press the [7] button. 2. Press the MENU button. 3. Select [Setup] menu with the button. 4. Select [Language] with the / buttons and press the SET button. 5. Select the displayed language with the / buttons and press the SET button. The setting will be stored. Formatting the Memory Card or Internal Memory This utility formats the internal me
Summary of the content on the page No. 19
CAPTURE MODE Capturing Still Images Your camera is equipped with a 2.5" full color TFT LCD display to help you compose images, playback recorded images/video clips or adjust menu settings. 1. Press the power button to turn the power on. The status LED turns green when the camera is on. 2. Toggle the MODE button to [8]. 3. Compose your image in the LCD display. Pressing the = button zooms in on the subject, and enlarges the subject on the LCD display. Pressing the > button provides a wider ang
Summary of the content on the page No. 20
Taking Images When the Smile Detection Feature Is On With the camera’s new “smile detection” feature, this camera detects smiles so you do not miss those special moments in life. 1. Toggle the MODE button until the scene mode selection screen appears. 2. Select [Smile Shot] with the / buttons, and press the SET button. 3. Compose the image, and press the shutter button down fully. 4. Once the camera detects a smile, it will automatically capture 3 images (by default, the flash mode setting i
