JOBO Photo Display Mirage L user manual

Summary of the content on the page No. 1

Mirage L
Photo Display 15"
Instruction Manual
��������������������������������������

Summary of the content on the page No. 2

JOBO Mirage L User Manual English Rev: 2.0 1. Introduction Congratulations on your purchase of the JOBO Mirage L! Before operating the unit, please read this manual thoroughly and retain it for future reference. This manual will help you to learn many of the exciting and useful features of your new Mirage L and make viewing more enjoyable. The Mirage L lets you view digital pictures directly from your camera's memory cards. You will be able to create a slideshow using multiple transiti

Summary of the content on the page No. 3

1.2. Precautions & Maintenance - This Mirage L is for indoor use only. - To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. - Do not block the ventilation holes on the back of the Mirage L at any time. - Keep your JOBO Mirage L out of sunlight. Direct sunlight may cause damage. - Always use the eject buttons on the memory storage cards slots to remove the memory storage cards. - Do not open the case of the JOBO Mirage L. There is a risk of elec

Summary of the content on the page No. 4

2. Getting Started - Assemble the Mirage L stand on the back for propping stability, then plug the power adapter into an electrical outlet. - Push the power switch at the end of Mirage L to “ON”. 2. 1. Inserting Memory Cards TM TM The Mirage L is compatible with the following memory cards or USB Disk: Secure Digital Card (SD) MultiMedia Card TM TM TM ® (MMC) Memory Stick & Memory Stick Pro CompactFlash (CF) Card xD Card Insert the memory card with the front label facing away from you. D

Summary of the content on the page No. 5

You will see the following screen if you insert the memory card correctly. Make sure you have at least one picture stored on the memory card. The frame will not function properly without a stored picture. Please select the memory card, press the button from the unit or remote control to enter the following screen. cture 2.2. Viewing Pi 1. You can use either the remote control or the on-board buttons to control the Mirage L. 2. Remove the plastic battery insulator (if any) on the bottom o

Summary of the content on the page No. 6

2.4. Display CLOCK&CALENDAR - Press [CLOCK] key on remote control into COLCK&CALENDAR interface, see following screen cut picture: - Press [CLOCK] key again return to main menu. Note: Clock and Alarm settings are in the setup menu! 3. Question & Answers This chapter will introduce some solutions to deal with the potential problems you may experience. Please consult this section first to correct the problem. If you also cannot solve the problem, please contact the local dealer to ask fo

Summary of the content on the page No. 7

3.1. Specifications Display size 15“ / 38.10 cm Aspect ratio 4:3 Display type TFT LCD Resolution 1024 x 768 Pixel Colors 16 billion Color depth 24 Bit Visible area 304.2 mm (H) x 228.1mm (V) Brightness 350 cd/m² Contrast 400:1 Viewing angle 140°(V), 110°(H) Response time 3 seconds Current entry AC110-240V 3 A Power consumption 25W Operating voltage 12V 3A Operation temperature: 10°-50° C, humidity: 0-85 %, non-condensating Environmental conditions Storage: -20°-60° C,

Summary of the content on the page No. 8

3.2. Included Accessories - AC Power Adapter - Stand - Remote control - USB Cable - Manual 4. Warranty and Service 4.1. Warranty conditions This product is subject to the legal warranty periods relating to manufacturing faults and defects. Substance of the warranty: 1. In the event of malfunctioning caused by manufacturing defects JOBO AG will repair or replace the defective product at its own discretion. 2. JOBO AG and its suppliers do not assume any liability for data losses occ