Summary of the content on the page No. 1
Manual rev.2.0
Digicom S.p.A.
VoiceGATE
VoiceGATE 8D5499
User’s Manual
REV. 2.0
Pag. 1
Summary of the content on the page No. 2
Manual rev.2.0 Digicom S.p.A. VoiceGATE Index IIDENT PREFACE ................................................................................................................ 3 1.0 GENERAL DESCRIPTION ........................................................................................ 4 1.1 LED Description.................................................................................................. 5 1.2 Connectors Description...................................................
Summary of the content on the page No. 3
Manual rev.2.0 Digicom S.p.A. VoiceGATE PREFACE All rights reserved; no part of this publication may be reproduced, stored in a retrieval system, or trasmitted in any form or by any means, electronic, otherwise, without the prior written permission of Digicom S.p.A. The contents of this booklet may be modified without notice. Every possible care has been taken in testing and putting together all the documentation contained in this booklet, however Digicom can not take any responsabilit
Summary of the content on the page No. 4
Manual rev.2.0 Digicom S.p.A. VoiceGATE 1.0 GENERAL DESCRIPTION Digicom VoiceGATE is the ideal solution for the new Telecom Operators who want to take at home or office the new POTs with integration of Voice (Voice over IP) and Internet. VoiceGATE has 3 Ethernet ports (10/100) for the connection of local devices (Personal Computer, Printers, etc.), 2 analog ports and, optional, 1 SO ISDN bus with 2 RJ45 ports (for the connection ISDN telephones). The connection to the network back
Summary of the content on the page No. 5
Manual rev.2.0 Digicom S.p.A. VoiceGATE 1.1 LED Description The VoiceGATE status can be checked through seven led indicators. Lan x Indicates the LAN ports status Off: no device connected On: device connected Line x Indicates the status of the two telephone lines Off: device not registered at the GateKeeper or internal address book not configured. On: device registered at the GateKeeper or internal address book configured Flashing: line in use Wan Indicates the WAN por
Summary of the content on the page No. 6
Manual rev.2.0 Digicom S.p.A. VoiceGATE 2.0 Configuration VoiceGATE can be configured using a Web browser. (Explore, Netascape, etc). This chapter describes the test to carry out on the computer to enter the configuration and the procedure to save the mofications in the configuration. In the paragraph “VoiceGATE working test” you find the procedures to carry out your first tests with Digicom’s VoiceGATEs. Just few operations and you will be able to install and test two VoiceGATEs. Th
Summary of the content on the page No. 7
Manual rev.2.0 Digicom S.p.A. VoiceGATE 2.2 Access to configuration 1. Run the browser and connect to http://192.168.2.1. When the connection is established, the following window will appear: Insert in the User Name field: admin Insert in the Password field: voicegate NB: User name and password must be written with lower case. Press Enter (or click OK) and the following window will be displayed: <----- Attention: after you enter the configuration menu, be sur
Summary of the content on the page No. 8
Manual rev.2.0 Digicom S.p.A. VoiceGATE Note: in case of problems while displaying the configuration, be sure that no proxy Server is active. In Microsoft Internet Explorer the Proxy setup is in: Tools, Internet Options, Connections LAN, Settings. Menù Description 1. General Configuration It displays the information on the HW and SW release of the equipment. 2. Telephony Configuration It allows the reading and the voice parameters setup. 3. Supplementary Services It al
Summary of the content on the page No. 9
Manual rev.2.0 Digicom S.p.A. VoiceGATE 2.3 Save the configuration To confirm the new settings you must press the Submit button at the end of any WEB page. To activate the modifications it is necessary, before you exit the configuration, to enter the Save settings menu and press the Submit button. At this point VoiceGATE will execute a StartUP, then (after about 45 seconds) the modifications are active. Pag. 9
Summary of the content on the page No. 10
Manual rev.2.0 Digicom S.p.A. VoiceGATE 2.4 VoiceGATE Working Test With simple operations you can test at once the working of VoiceGATE. We suggest to follow the procedures described in this chapter so to avoid working problems of VoiceGATE due to wrong configurations. The factory settings of VoiceGATE are the following: Ethernet: Voice: IP address: 192.168.2.1 Mode: Address Book Subnet Mask: 255.255.255.0 Numbers: Line1->123 Line2 ->456 To test the working of any single VoiceG
Summary of the content on the page No. 11
Manual rev.2.0 Digicom S.p.A. VoiceGATE 2.5 Configuration Menù description General Information The information concerning the Hw and SW version and the elapsed time from the power on are displayed in this window. Pag. 11
Summary of the content on the page No. 12
Manual rev.2.0 Digicom S.p.A. VoiceGATE Telephony Configuration The voice information are displayed in this window, in particular: Call Setting: defines the Voice working mode. It can be set to work with the Gatekeeper or with the internal address book. Codec Selected: it allows to define the priority list for the codec, when the codec is set in Automatic. “1” indicates the main codec. H323 Alias: name used when registering at the Gatekeeper. Note: This String must be di
Summary of the content on the page No. 13
Manual rev.2.0 Digicom S.p.A. VoiceGATE Interdigit Delay: wait in sec. from the last digit of the number, before starting the call. It is possible to activate the immediate dialling of the number, inserting the “#” character at the end of the number. Element in Gatekeeper: Gatekeeper IP address for registration. Maximum 4 addresses can be stored. Gatekeeper Keep Alive: Time in sec. for Gatekeeper registration renewal. Fixed Tei: TEI setup (Automatic or Fixed). This para
Summary of the content on the page No. 14
Manual rev.2.0 Digicom S.p.A. VoiceGATE Supplementary Services The information concerning the reading and the voice supplementary service setup, according the H.450 standard, are displayed in this window. You will find here a brief description of the various supplementary services. For almost all the supplementary services it is necessary to hold on a call (H.450.4 service enabled). This operation is carried out through the “R” key or “Flash” key with analog phones; in cas
Summary of the content on the page No. 15
Manual rev.2.0 Digicom S.p.A. VoiceGATE H.450.4 Call Hold H.450.4 service allows to put on hold a call and to call another number. Once the two calls have been activated, you can: • Press R + 1 -> To close the active call and recover the on hold call. • Press R + 2 -> To switch from a conversation to another, keeping one on hold. • Press R + 3 -> To activate a three users conference. Note: For the three users conference it is necessary to use the GateKeeper Server and the MCU Se
Summary of the content on the page No. 16
Manual rev.2.0 Digicom S.p.A. VoiceGATE Public Network Configuration The information concerning the reading and the Wan (Uplink) parameters setup are displayed in this window. Use DHCP to obtain configuration: Enables/Disables the device to DHCP configuration IP Address: Device IP address - LAN site Subnet Mask: Device Network Subnet Mask Dns List: List of active Domain Server Name (4 maximum) Domain Name: Name of the Domain Router List: Device default Gateway
Summary of the content on the page No. 17
Manual rev.2.0 Digicom S.p.A. VoiceGATE Private Network Configuration The information concerning the reading and the LAN part parameters are displayed in this window: <----- Attention: do not insert an IP address of the same network used in the WAN configuration “PublicNetwork Configuration”. If the WAN address is 192.168.2.1 you cannot use addresses 192.168.2.x. Enable DHCP Server: Enables/Disables the DHCP Server functionality to the LAN IP Address: Devi
Summary of the content on the page No. 18
Manual rev.2.0 Digicom S.p.A. VoiceGATE Mac Addresses The Mac addresses of the device (Wan and LAN side) are displayed in this window. Public Network Mac: Mac address assigned to the WAN Private Network Mac: Mac Address assigned to the LAN SNMP Agent The information concerning the reading and the parameter setup of SNMP protocol are displayed in this window. SNMP Version: Device SNMP agent version SNMP Trap Server: Server IP address to send the TRAP S
Summary of the content on the page No. 19
Manual rev.2.0 Digicom S.p.A. VoiceGATE RIP The information concerning the reading and the parameters setup of the RIP protocol are displayed in this window. RIP: Enables/Disables the RIP Silent Mode: OnlyRX – It manages the routing table in reception only RX+TX – It manages the routing table also in transmission Rip2 Mode: Multicast – It indicates if the RIP packets must be sent to the defined multicast address 224.0.0.9 (RIPv2) Broadcast – It indicates if the RIP pack
Summary of the content on the page No. 20
Manual rev.2.0 Digicom S.p.A. VoiceGATE Route Table The informations concerning the routing table are displayed in this window. Security Configuration The informations concerning the password setup. Pag. 20
