Summary of the content on the page No. 1
Summary of the content on the page No. 2
2
Summary of the content on the page No. 3
Getting started Thank you for purchasing your new GE digital answering machine. Please record the following for your future reference: Serial Number: ____________________________ (found on the bottom of the unit) Name of store: ____________________________ Date of purchase: __________________________ Attach or keep your receipt to assist with any repair under warranty. This product is warranted for a period of 12 months from the date of purchase. Package contents For
Summary of the content on the page No. 4
Battery Back-up installation In the event of a power loss, a 9-volt alkaline battery (not included) will enable the answerer to retain messages stored in memory. To install a battery: 1. Remove the battery compartment door in the bottom of the unit by loosening the screw with a Phillips screwdriver. Lift the door. 2. Connect a new 9-volt alkaline battery. The large and small contacts on the battery clip and the battery will interlock. Once connected, place the battery inside the ba
Summary of the content on the page No. 5
Connections Australia To Line Socket New Zealand To Power Outlet Controls and functions 5
Summary of the content on the page No. 6
Recording a greeting When recording the greeting you should be about 20cms from the unit. Eliminate as much background noise as possible. The default greeting is “Record after tone”. 1. Prepare your greeting. Sample greeting: “Hi, this is (use your name here). I can’t answer the phone right now, so please leave your name, number, and a brief message after the tone, and I’ll get back to you. Thank you.” 2. Hold down the [GREETING] button. After the tone, you have 30 seconds to record
Summary of the content on the page No. 7
2. To change the minutes, press and release the [NEXT] or [PREVIOUS] button until the desired setting is announced. 3. To store the minutes, press and release the [STOP/SET] button. The unit confirms the setting and enters the Rings to answer menu. Setting the Rings to Answer This setting allows you to select the number of rings before the unit answers a call. The default setting is 4. 1. The unit announces, “Ring to answer (the current ring to answer setting) To set ring, press
Summary of the content on the page No. 8
Setting the security code This setting allows you to change the security code used to access your answerer from a remote location. The default setting is 123. 1. The unit announces, “Security code (the current code setting) To set security code, press next… press set to continue.” 2. To change the first security code number, press and release the [NEXT] or [PREVIOUS] button until the desired setting is announced. The unit announces all three numbers, but only the first number will cha
Summary of the content on the page No. 9
Playing messages When the message indicator flashes continuously you have received new messages. • To play messages, press and release the [PLAY/MEMO] button. • To stop play, press and release the [STOP/SET] button. • To restart the message, press and release the [PREVIOUS] button. • To go back to the beginning of a previous message, press and release the [PREVIOUS] button twice within one second. • To skip the beginning of the next message, press and release the [NEXT] butt
Summary of the content on the page No. 10
Remote access You can access your answerer from any touch-tone telephone by entering your 3-digit security code (the default security code is 123 – see Setting Security Code). The remote function will not work with rotary or pulse dialling telephones. Also some dialling telephones only output tones for a fraction of a second. If you experience difficulty with remote access operation, try another telephone, or use a separate tone generator. Cut out the wallet-size remote access ins
Summary of the content on the page No. 11
Troubleshooting Tips Problem Possible solution/cause th Does not answer or answers on 10 ring • Turn unit on. • Memory is full, erase some messages. • Check AC power and telephone tine connection. Incoming messages are incomplete • Extension phone picked up while caller is leaving a message (call screening) • Message left is longer than 60 seconds. • Memory is full. Does not respond to remote commands • Use a touch-tone telephone. • Enter correct security code. Answerer does n
Summary of the content on the page No. 12
Warranty This product is warranted for a period of 12 months from the date of purchase. In the event of equipment failure, please return this product with the proof of purchase to the store where it was purchased. This waranty does not cover damage caused by lightning, power surge, misuse or neglect, vermin infestation, accidental damage or any alteration that affects the performance or reliability of the product. Remote Access Instruction Card Please cut out the remote acces
Summary of the content on the page No. 13
Notice – New Zealand only This equipment may not provide for the effective hand-over of a call to another device connected to the same line. The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum condition for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly
Summary of the content on the page No. 14
© Copyright 2001 ATLINKS Australia Pty Limited GE is a Registered Trade Mark www.atlinks.com.au Printed in China 29878 Rev 1.1 14
