Summary of the content on the page No. 1
Favorit 65411 VI
User manual Dishwasher
Summary of the content on the page No. 2
2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. CONTENTS OPERATING INSTRUCTIONS 3 SELECT AND START A
Summary of the content on the page No. 3
Safety information 3 OPERATING INSTRUCTIONS SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. Correct use • Only use the appliance to clean household utensils that are suitable for dishwashers. • Do not put solvents in the appliance. Risk of explosion. • Put the kn
Summary of the content on the page No. 4
4 Safety information Installation • Make sure that the appliance is not damaged because of transport. Do not connect a damaged appliance. If necessary, contact the supplier. • Remove all packaging before first use. • A qualified and competent person must do the electrical installation. • A qualified and competent person must do the plumbing installation. • Do not change the specifications or modify this product. Risk of injury and damage to the appliance. • Do not use the appliance: – if the mai
Summary of the content on the page No. 5
Safety information 5
Summary of the content on the page No. 6
6 Product description PRODUCT DESCRIPTION 1 Upper basket 2 Water hardness dial 3 Salt container 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm Light beam After the start of the washing program, a light beam shows on the floor below the appli- ance door. If the appliance is installed higher with a flush kitchen furniture door, the light beam will not be visible. Light beam The red light is on. Indication of the start of a washing program.
Summary of the content on the page No. 7
Product description 7
Summary of the content on the page No. 8
8 Control panel CONTROL PANEL 7 1 On/off button 2 Digital display 3 Delay start button 4 Program selection buttons 5 Indicator lights 6 Program indicator lights 7 Function buttons Indicator lights MULTITAB The indicator light shows the activation/deacti- vation of the multitab function. Refer to 'Multi- tab function'. 1) The indicator light comes on when it is necessa- ry to fill the salt container. Refer to 'Use of dish- washer salt'. The salt indicator light can stay on for some hours, but i
Summary of the content on the page No. 9
Control panel 9 • program duration, • remaining time to the end of the program, • end of a washing program, • number of hours in delay start, • fault codes, • deactivation/activation of the audible signals. Delay start button Use the delay start button to delay the start of the washing program with an interval be- tween 1 and 19 hours. Refer to 'Select and start a washing program'. Function buttons Use the function buttons for these operations: • to set the water softener. Refer to 'Setting the
Summary of the content on the page No. 10
10 Use of the appliance – Indicator lights for function buttons A and B go off. – Indicator light for function button C flashes. – The digital display shows the setting. Audible signals deactivated Audible signals activated The audible signals are activated. 5. Press the function button C again. – The digital display shows the new setting. The audible signals are deactivated. 6. Switch off the appliance to save the operation. Do these steps to activate the audible signals: 1. Do the above proced
Summary of the content on the page No. 11
Setting the water softener 11 Water hardness Water hardness setting mg/l ppm mmol/l manually electronically 400 - 509 400 - 509 4,0 - 5,0 2 6 330 - 399 330 - 399 3,3 - 3,9 2 5 260 - 329 260 - 329 2,6 - 3,2 1 4 190 - 259 190 - 259 1,9 - 2,5 1 3 70 - 189 70 - 189 0,7 - 1,8 1 2 1) < 70 < 70 < 0,7 1 1 1) No use of salt required. You must set the water softener manually and electronically. Manual adjustment The appliance is set at the factory at position 2. 1. Open the door. 2. Remove the lower baske
Summary of the content on the page No. 12
12 Use of dishwasher salt USE OF DISHWASHER SALT CAUTION! Only use dishwasher salt. Types of salt that are not suitable for dishwashers cause damage to the water softener. CAUTION! Grains of salt and salty water on the bottom of the appliance can cause corrosion. Fill the appliance with salt before you start a washing program to prevent corrosion. Do these steps to fill the salt container: 1. Turn the cap anticlockwise to open the salt container. 2. Fill the salt container with 1 litre of water
Summary of the content on the page No. 13
Use of rinse aid 13 1. Press the release button (A) to open the rinse aid dispenser. 2. Fill the rinse aid dispenser with rinse aid. The mark 'max.' shows the maximum level. 3. Remove the spilled rinse aid with an ab- sorbent cloth to prevent too much foam during the subsequent washing program. 4. Close the rinse aid dispenser. Adjusting the rinse aid dosage The rinse aid is set at the factory at position 4. You can set the rinse aid dosage between position 1 (lowest dosage) and position 6 (high
Summary of the content on the page No. 14
14 Loading cutlery and dishes LOADING CUTLERY AND DISHES Helpful hints and tips Only use the appliance for household utensils that are suitable for dishwashers. Do not use the appliance to clean objects that can absorb water (e.g. sponges, household cloths). • Before you load cutlery and dishes, follow these steps: – Remove all food remainings and debris. – Make burnt, remaining food in pans soft. • While you load cutlery and dishes, follow these steps: – Load hollow items (e.g. cups, glasses an
Summary of the content on the page No. 15
Loading cutlery and dishes 15 The rows of prongs in the lower basket can be ad- justed flat to load pots, pans and bowls. Cutlery basket WARNING! Do not put long-bladed knives in a vertical position. Arrange long and sharp cutlery hori- zontally in the upper basket. Be careful with sharp items. Put forks and spoons with the handles down. Put knives with the handles up. Mix spoons with other cutlery to prevent them nesting together. Use the cutlery grids for best washing results. If the dimension
Summary of the content on the page No. 16
16 Loading cutlery and dishes Upper basket The upper basket is for plates (maximum 24 cm in diameter), saucers, salad bowls, cups, glasses and lids. Arrange the items to let water touch all surfaces. • For longer items fold the cup racks up. Adjustment of the height of the upper basket If you put large plates in the lower basket, first move the upper basket to a upper position. Maximum height of the dishes in: the upper basket the lower basket Upper position 20 cm 31 cm Lower position 24 cm 27
Summary of the content on the page No. 17
Use of detergent 17 1. Pull the basket out until it stops. 2. Carefully lift the two sides until the mechanism is engaged and the basket is stable. Follow these steps to move the upper basket to the lower position: 1. Pull the basket out until it stops. 2. Carefully lift the two sides upwards. 3. Hold the mechanism and guide it back down slowly. CAUTION! • Do not lift or lower the basket on one side only. • If the basket is in the upper position, do not put cups on the cup racks. USE OF DETERGEN
Summary of the content on the page No. 18
18 Multitab function 3. If you use a washing program with pre- wash, put more detergent in the prewash detergent compartment (B). A B 4. If you use detergent tablets, put the deter- gent tablet in the detergent dispenser (A) . 5. Close the lid of the detergent dispenser. Press the lid until it locks into position. Different brands of detergent dissolve in different times. Some detergent tablets do not have the best cleaning results during short washing programs. Use long washing programs when yo
Summary of the content on the page No. 19
Select and start a washing program 19 Activate or deactivate the multitab function before the start of a washing program. You cannot activate or deactivate the multitab function when the program operates. Can- cel the washing program, then set the program again. To activate the multitab function: • Press and hold the two multitab buttons (function buttons D and E). The multitab indica- tor light comes on. To deactivate the multitab function: • Press and hold the two multitab buttons (function bu
Summary of the content on the page No. 20
20 Select and start a washing program Follow these steps to set and start a washing program: 1. Switch on the appliance. 2. Make sure that the appliance is in setting mode. 3. Press one of the program buttons. Refer to the 'Washing programs' chart for program details. – The indicator light of the selected program stays on. All other program indicator lights go off. – The digital display shows the program duration. 4. Close the door. – The washing program starts. When the washing program operates
