Summary of the content on the page No. 1
FAVORIT 89020 I
User manual Dishwasher
Summary of the content on the page No. 2
2 Contents Thank you for choosing one of our high-quality products. To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. And please pass it to any future owner of the appliance. We wish you much joy with your new appliance. Contents Operating instructions 3 Fill with detergen
Summary of the content on the page No. 3
Safety information 3 Operating instructions Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these in- structions and make sure that they remain with the appliance if it is mo
Summary of the content on the page No. 4
4 Product description • Keep children well away from the dishwasher when the door is open. Installation • Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. • All packaging must be removed before use. • Any electrical and plumbing work required to install this appliance must be carried out by a qualified and competent person. • For safety reasons it is dangerous to alter the specifications or attempt to modify thi
Summary of the content on the page No. 5
Control panel 5 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm Internal light This appliance has an internal light that comes on when you open the door and goes off when the door is closed. WARNING! Visible led radiation, do not stare into the beam. Internal light equipped with LED lamp CLASS 2 in accordance with IEC 60825-1: 1993 + A1: 1997 + A2: 2001. Emission wave length: 450 nm Maximum emitted power: 548 μW If it is necessary to replace the light, contact
Summary of the content on the page No. 6
6 Control panel Display 1 This row of individual lamps is divided in two sections: Program menu and Options menu. Washing programmes: during the progress of the programme these little bars indicate the phase of the washing programme: prewash - main wash - rinses - drying. 2 In this row several details are displayed: – Setting mode guide to the selection of the washing programme - duration time of the programme, options (when together with the washing programme one or more options are set, the up
Summary of the content on the page No. 7
Control panel 7 Option menu Option submenu DELAY START Allows the start of the selected washing programme to be delayed for between 1 and 19 hours. The countdown will decrease with steps of 1 hour. Only in the last hour the decrease is in minutes. Once the count- down has elapsed the washing programme will start automatically. MULTITAB Sets the dishwasher for the use of conventional detergents or combi detergent tablets (3 in 1 - 4 in 1 - 5 in 1 etc...). See MULTITAB function. – ON function acti
Summary of the content on the page No. 8
8 First use 3. If you want to set a different language use the up and down scrolling buttons until the required language appears in the display. Press OK / START to confirm. First use Before using your dishwasher for the first time: • Ensure that the electrical and water connections comply with the installation instruc- tions • Remove all packaging from inside the appliance • Set the water softener • Pour 1 litre of water inside the salt container and then fill with dishwasher salt • Fill the ri
Summary of the content on the page No. 9
Use of dishwasher salt 9 Setting manually The dishwasher is factory set at position 2. 1. Open the dishwasher door. 2. Remove the lower basket from the dish- washer. 3. Turn the water hardness dial to position 1 or 2 (see table). 4. Replace the lower basket. Setting electronically The dishwasher is factory set at level 5. Enter Option menu - SETTINGS - WATER HARDNESS . Using the up and down scrolling buttons set the level of the water softener according to the hardness of the water in your area
Summary of the content on the page No. 10
10 Use of rinse aid You are reminded of this by a displayed message REFILL SALT . This occurs only at the start and at the end of the washing programme; during the running of the programme the indication for salt refilling is not active. The refilling salt message can remain visible for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affect
Summary of the content on the page No. 11
Daily use 11 This occurs only at the start and at the end of the washing programme; during the running of the programme the indication for rinse aid refilling is not active. Adjusting the dosage of rinse aid According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1= minimum dosage, position 6= maximum dosage). The dose is factory set in position 4. Increase the dose if there are drops of water or lime spots on the dishes aft
Summary of the content on the page No. 12
12 Loading cutlery and dishes • Plastic items and pans with non stick coatings have a tendency to retain water drops; these items will not dry as well as porcelain and steel items. • Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move. For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden, horn, china or mother- • Only wash stoneware in the dishwasher if it of-pearls hand
Summary of the content on the page No. 13
Loading cutlery and dishes 13 To make it easier to load larger dishes, all rear plate racks in the lower basket can be folded down. The cutlery basket WARNING! Sharp knives and other items of cutlery with sharp edges must be laid in the cutlery tray or in the upper basket because of the risk of injury. Place knives, small spoons and small forks in the cutlery tray which is in the upper basket. Place forks and spoons that do not fit in the cutlery tray in the cutlery basket. To ensure that all it
Summary of the content on the page No. 14
14 Loading cutlery and dishes 2. Place forks and spoon in the cutlery basket with their handles pointing downwards. For larger utensils, such as whisks, leave off one half of the cutlery grid. The cutlery basket can be opened out. Always make sure that you put your hand around both parts of the two-part handle when removing it from the dishwasher. 1. Place the cutlery basket on a table or work surface. 2. Open out the two-part handle. 3. Remove cutlery. Beer glasses There are the glass holders o
Summary of the content on the page No. 15
Loading cutlery and dishes 15 You can replace the beer glass holders with 2 sup- plied cup racks. You can use them as: • cup shelves • champagne glass holders. Do these steps to remove beer glass holders 1. Pull upwards and push lightly on the hooks from below. 2. Use the hooks to attach cup racks onto the horizontal bar. You can remove the support that fix the beer glass holders or cup racks if necessary. 1. Use the thumbs to push the support back.
Summary of the content on the page No. 16
16 Loading cutlery and dishes 2. Push them forwards to fix the support again. WARNING! Do not hold the support with the hand. This can cause injury. Place the hand under the support on the lower basket. The upper basket Load smaller, fragile crockery and long, sharp cut- lery in the upper basket. • Arrange items of crockery on and under the folding cup racks so that they are offset from each other and water can reach all items. • The cup racks can be folded up out of the way for tall crockery it
Summary of the content on the page No. 17
Loading cutlery and dishes 17 • For glasses with long stems, fold the glass rack to the right, otherwise fold it away to the left. • The row of spikes on the left of the upper basket is also in two parts and can be folded away. Spikes not folded away: place glasses, mugs etc. in the upper basket. Spikes folded away: more room for serving dishes. Adjusting the height of the upper basket Maximum height of the dishes in: the upper basket the lower basket With upper basket raised 22 cm 30 cm With u
Summary of the content on the page No. 18
18 Use of detergent 1. Pull out the upper basket completely. 2. Holding the upper basket by the handle, raise it as far as it will go and then lower it vertically. The upper basket will latch into the lower or the upper position. WARNING! After loading your machine always close the door, as an open door can be a hazard. Before closing the door, ensure that the spray arms can rotate freely. Use of detergent Only use detergents specifically designed for use in dishwashers. Please observe the manuf
Summary of the content on the page No. 19
Multitab function 19 2. Fill the detergent dispenser (1) with deter- gent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent. 3. All programmes with prewash need an ad- ditional detergent dose (5/10 g) that must be placed in the prewash detergent cham- ber (2). This detergent will take effect during the prewash phase. 4. When using detergent tablets, place the tablet in compartment (1) 5. Close the lid and press until it locks in p
Summary of the content on the page No. 20
20 Washing programmes Once the programme is running, the "Multitab function " can NO longer be changed. If you want to exclude the "Multitab function " you have to cancel the programme setting and then deactivate the "Multitab function ". In this case you have to set a washing programme (and desired options) again. If the drying results are not satisfactory we recommend that you: 1. Fill up the rinse aid dispenser with rinse aid. 2. Activate the rinse aid dispenser. 3. Set the rinse aid dosage t
