Summary of the content on the page No. 1
Installation/Operation Manual with Service Replacement Parts
Undercounter
Dishwashers
(with pumped final rinse)
Models:
201HT High temperature w/booster
201HTN High temperature w/o booster
201L T Low temperature chemical sanitizing
201HT
401HT High temperature w/booster
401HTN High temperature w/o booster
501HT High temperature w/booster
501HTN High temperature w/o booster
501L T Low temperature chemical sanitizing
401HT
Dishwasher serial no.
501HT
Issue Date: 3.15.1
Summary of the content on the page No. 2
For future reference, record your dishwasher information in the box below. Model Number__________________________ Serial Number_______________________ Voltage________________Hertz_____________ Phase__________________ Service Agent _________________________________________Tel:______________________ Moyer Diebel Parts Distributor _________________________________ Tel:______________________ National Service Department - Canada National Service Department -USA Toll-free: 800/ 263-5798 To
Summary of the content on the page No. 3
In Canada you can Register by Postage Paid Mail: Cut along the dashed lines, then complete the back of the postage paid card above and mail immediately to validate your machine warranty. OR REGISTER YOUR PRODUCT ONLINE Make sure you are connected to the internet then click or enter the address below. In the U.S.A http://www .moyerdiebel.com/register In Canada http://www .championindustries.com/canada/register
Summary of the content on the page No. 4
PRODUCT REGISTRATION CARD Model Serial # Date of Installation: Company Name: Address: (Street) Province Postal Code Telephone #: ( ) --- Contact: Installation Company: Address: Telephone #: Contact: FAILURE TO REGISTER YOUR PRODUCT MAY VOID YOUR WARRANTY IMPORTANT IMPORTANT REGISTER YOUR PRODUCT ONLINE Make sure you are connected to the internet then click or enter the address below. In the U.S.A http://www .moyerdiebel.com/register In Canada http://www .champion
Summary of the content on the page No. 5
Revision History Revision History We reserve the right to make changes to this manual without notice and without incurring any liability by making the changes. Equipment owners may request a revised manual, at no charge, by calling 1 (800) 858-4477 in the USA or by calling 1 (800) 263-5798 in Canada. Revision Revised Serial Number Revision Date Pages Ef fectivity Description 9.15.06 All W1 1948 Released first edition 3.22.07 59
Summary of the content on the page No. 6
Revision History Revision History (continued) Revision Revised Serial Number Revision Date Pages Ef fectivity Description ii
Summary of the content on the page No. 7
Blank Page This Page Intentionally Left Blank iii
Summary of the content on the page No. 8
Limited W arranty LIMITED WARRANTY Moyer Diebel, 3765 Champion Boulevard, Winston-Salem, North Carolina 27105, and P.O. Box 301, 2674 N. Service Road, Jordan Station, Canada, L0R 1S0, warrants machines, and parts, as set out below. Warranty of Machines: Moyer Diebel warrants all new machines of its manufacture bearing the name "Moyer Diebel" and installed within the United States and Canada to be free from defects in material and workman ship for a period of one (1) year after the date
Summary of the content on the page No. 9
T able of Contents T able of Contents Model 201, 401, 501 Undercounter Dishwashers Revision History ........................................................................................................... i Limited W arranty ........................................................................................................... ii Model Descriptions ........................................................................................................... iv Installation ...
Summary of the content on the page No. 10
Model Description Model Description 201-HT, 401-HT, and 501-HT Models Pumped final rinse high temperature sanitizing dishwasher with built-in 40°F rise stainless steel electric booster. Single Phase to Three Phase Field Conversion. 201-HTN, 401-HTN, and 501-HTN Models Pumped final rinse high temperature sanitizing dishwasher without built-in 40°F rise stainless steel electric booster. 201-LT, 501-LT Model Pumped final rinse low temperature chemical sanitizing dishwasher with 3 built-in chemical
Summary of the content on the page No. 11
Installation Receiving NOTE: The installation of your dishwasher must be performed by qualified service personnel. Problems due to improper installation are not covered by the Warranty. 1. Inspect the outside of the dishwasher carton for signs of damage. 2. Remove the carton and inspect the dishwasher for damage. 3. Check for any accessories that may have shipped with your dishwasher. 4. Turn to the front of this manual and follow the instructions to register your machine online. 5. Move th
Summary of the content on the page No. 12
Installation Electrical Connections For Model 201HT, 401HT, and 501HT machines beginning with S/N 14236 and above 1. Refer to the connection diagrams below. 2. Models 201HTN /LT, 401HTN, 501HTN /LT are equipped with a 4 ft. power cord/plug and only require a 115VAC,15A receptacle. 3. Models 201HT, 401HT, and 501HT 1 PH machines require a 3-wire plus ground supply which includes a current carrying neutral. 4. Models 201HT, 401HT, and 501HT 3 PH machines require a 4-wire plus ground sup
Summary of the content on the page No. 13
Installation Electrical Connections For machines built prior to S/N 14236 WARNING: Electrocution or serious injury may result when working on an energized circuit. Disconnect power at the main breaker or service disconnect switch before working on the circuit. Lock-out and tag the breaker to indicate that work is being performed on the circuit. ATTENTION A qualified electrician must connect the main incoming power to the dishwasher in accordance with all local codes and regulations or
Summary of the content on the page No. 14
Installation Electrical Connections (continued) For Models 201HT, 401HT, and 501HT beginning with S/N 14236 and above WARNING: Electrocution or serious injury may result when working on an energized circuit. Disconnect power at the main breaker or service disconnect switch before working on the circuit. Lock-out and tag the breaker to indicate that work is being performed on the circuit. Booster Heater Element Field Conversion from Single to Three Phase Operation Dishwashers shipped f
Summary of the content on the page No. 15
Installation Booster Heater Element Field Conversion from Single to Three Phase Operation (continued) Main Terminal Block (MTB) ATTENTION ELECTRICIAN: No power when booster heater is connected for 1 PH The Main Terminal Block (MTB) is a 4-wire connection block which includes a current-carrying neutral. The block can be connected for 3PH or 1PH depending on how the booster heater is wired ( see the previous page). Refer to the diagram to the L1 L2 L3 N right and connect the main incoming
Summary of the content on the page No. 16
Installation Water Connections NOTE Plumbing connections must comply with national, local plumbing and sanitary codes. IMPORTANT Make sure that the flexible water supply and drain hoses are not kinked. 1. All models have a 6 ft./1.8m flexible hot water fill hose with a 3/4" female garden hose connector. 2. A 1/2" or larger main incoming supply line should be installed to the dishwasher. 3. A 1/2" or larger shut-off valve should be installed in the main water supply as close to the dish
Summary of the content on the page No. 17
Installation Drain Connections ATTENTION Do not connect the drain hose to a disposer. The dishwasher will not drain correctly. NOTE The dishwasher drains in 8 seconds and drain water exits the hose with considerable force. 1. All models have a 6 ft. 5/8" I.D. drain hose. The maximum drain height connection must not exceed 3 ft.[0.9 m]. 2. The drain hose is located at the rear of the dishwasher. A 5/8" hose-barb fitting is strapped to the drain hose to connect the drain hose. 3. The drain h
Summary of the content on the page No. 18
Initial Start-up Filling the Booster For Models 501HT, 401HT, and 201HT Note: The dishwasher contains a built-in booster heater that was drained prior to shipment and must be filled with water before operating the dishwasher. Booster Fill Switch The booster heater is filled using the Booster Fill Switch. It is located behind the lower front access panel in the center of the bracket that holds the chemical dispensing pumps (see the photos to the right). Fill the booster heater: 1. Make sur
Summary of the content on the page No. 19
Initial Start-up Check List All Models 1. Remove any protective film from dishwasher. 2. Check the interior for foreign material. 3. Make sure the dishwasher is permanently located. 4. Make sure all utility connections are complete. 5. Make sure the flexible drain hose and the hot water fill hose are not kinked. 6. Make sure that the chemical supply containers are full and the chemical pick-up tubes are installed in the proper containers. 7. Make sure the scrap screen is in place. 8.
Summary of the content on the page No. 20
Initial Start-up Chemical Dispensing Pumps Models 501HT, 501HTN, 401HT, 401HTN, 201HT, 201HTN 1. Models 201HT, 201HTN, 401HT, 401HTN, 501HT, and 501HTN: are equipped with a built-in detergent dispensing pump and a rinse-aid dispensing pump. The pumps are located behind the lower front access panel. Chemical Injection Point Chemical Dispensing Pumps for Chemical Pick-up Tubes, High Temperature HT and HTN stiffener tubes & line Models. strainers. 2
