Summary of the content on the page No. 1
MODEL G0637/G0638
1
7 /2 & 10 HP CYCLONE DUST
COLLECTORS
OWNER'S MANUAL
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Table of Contents INTRODUCTION SECTION 4: DESIGNING THE SYSTEM SECTION 5: ACCESSORIES ......................... 41 SECTION 6: OPERATIONS SECTION 1: SAFETY SECTION 7: MAINTENANCE SECTION 2: POWER SUPPLY SECTION 8: SERVICE SECTION 8: WIRING SECTION 3: SETUP SECTION 9: PARTS ...........
Summary of the content on the page No. 4
INTRODUCTION Manual Accuracy Contact Info your machine may not exactly match the manual Machine Description www.grizzly.com
Summary of the content on the page No. 5
Identification Figure 1. To reduce the risk of serious injury when using this machine, read and understand this entire manual before beginning any operations.
Summary of the content on the page No. 6
G0637 Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0637 7-1/2 HP 3-PHASE CYCLONE DUST COLLECTOR Product Dimensions: Weight.............................................................................................................................................................. 624 lbs. Length/Width/Height....................................................................................................
Summary of the content on the page No. 7
Main Specifications: Operation Air Suction Cap............................................................................................................ 3468 CFM @4.3 in. S.P. Max Static Pressure.............................................................................................................................. 14.73 in. Main Inlet Size............................................................................................................................................10 in. Maxi
Summary of the content on the page No. 8
G0638 Machine Data Sheet MACHINE DATA SHEET Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901 MODEL G0638 10 HP 3-PHASE CYCLONE DUST COLLECTOR Product Dimensions: Weight.............................................................................................................................................................. 646 lbs. Length/Width/Height.......................................................................................................
Summary of the content on the page No. 9
Main Specifications: Operation Air Suction Cap............................................................................................................ 4029 CFM @4.3 in. S.P. Max Static Pressure................................................................................................................................ 16.8 in. Main Inlet Size............................................................................................................................................12 in. Max
Summary of the content on the page No. 10
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Indica
Summary of the content on the page No. 11
DISCONNECTING POWER SUPPLY. FORCING MACHINERY. GUARDS & COVERS. APPROVED OPERATION. NEVER STAND ON MACHINE. STABLE MACHINE. DANGEROUS ENVIRONMENTS. AWKWARD POSITIONS. ONLY USE AS INTENDED. USE RECOMMENDED ACCESSORIES. UNATTENDED OPERATION.
Summary of the content on the page No. 12
Additional Safety Instructions for Dust Collectors MACHINE USE. AVOIDING FIRES. WEAR RESPIRATOR. KEEPING FINGERS SAFE. SUSPENDED DUST PARTICLES AND IGNITION SOURCES. DUST HAZARD. EMPTYING DUST.
Summary of the content on the page No. 13
SECTION 2: POWER SUPPLY Availability Circuit Information For your own safety and protection of property, consult a qualified electrician if you are unsure about wiring practices or electrical codes in your area. Electrocution, fire, or equipment damage may occur if machine is not Note: The circuit requirements listed in this man- correctly grounded and ual apply to a dedicated circuit—where only one connected to the
Summary of the content on the page No. 14
Connection Type Extension Cords Figure Phase Converter 3L/2 1L/2 5L/3 Figure 2. Grounding Instructions Serious injury could occur if you connect the machine to power before completing the setup process. DO NOT connect to power until instructed later in this
Summary of the content on the page No. 15
3. Model G0637 440V Conversion 4. Figure 4 Wiring Diagrams Pages 51–52 Model G0638 440V Conversion Figure 4. To convert the G0638 to 440V: 1. You must have a qualified electrician inspect 2. your 440V rewiring job before connecting the Figure 3 dust collector to the power source. Failure to heed this warning may result in property damage, serious personal injury, or death fr
Summary of the content on the page No. 16
3. Correcting Phase Polarity 4. Step 10 Page 32 NOTICE If this machine is wired out-of-phase, the motor and impeller will spin in the wrong direction. The efficiency of the dust col- lector will be greatly reduced and will not provide the rated CFM. You must make sure the motor is spinning in the correct direction before placing the machine into full operation. Perform Step 10 of the test run on Page 32
Summary of the content on the page No. 17
SECTION 3: SETUP Needed for Setup This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with Description Qty the controls and opera- tions before starting the machine! Wear safety glasses dur- ing the entire setup pro- cess! This machine and its com- Page 20 ponents are very heavy. Get lifting help or use power lifting equipment such as a forklift to move
Summary of the content on the page No. 18
Inventory P. Inventory Q. R. S. T. U. V. Inventory: (Figures 6–10) Qty W. A. X. B. C. D. E. F. G. H. I. Figure 8. Y. Z. AA. Figure 6. J. AB. K. AC. L. AD. M. N. O. Figure 9. Figure 7.
Summary of the content on the page No. 19
AE. AK. AL. AM . AN. AO. AP. AQ. AR. AF. AG. AH. AI. AJ. Figure 10.
Summary of the content on the page No. 20
Hardware Recognition Chart
