Summary of the content on the page No. 1
Instruction Manual
DVD-R157
www.samsung.com
AK68-01315A-02
0 01315A(02)-R157-XAA-ENG.indb 1 1315A(02)-R157-XAA-ENG.indb 1 2 2007-01-25 오후 6:10:58 007-01-25 오후 6:10:58
Summary of the content on the page No. 2
Getting Started If this equipment does cause harmful interference to radio or Warning television reception, which can be determined by turning the TO REDUCE THE RISK OF ELECTRIC SHOCK, equipment off and on, the user is encouraged to try to correct DO NOT REMOVE THE COVER(OR BACK). the interference by one or more of the following measures: NO USER-SERVICEABLE PARTS ARE INSIDE. REFER • Reorient or relocate the receiving antenna. SERVICING TO QUALIFIED SERVICE PERSONNEL. • Increase the separat
Summary of the content on the page No. 3
Getting Started • Exterior interference such as lightning and static Precaution electricity can affect normal operation of this recorder. If this occurs, turn the recorder off and on again with the POWER button, or disconnect and then reconnect the ▌Important Safety Instructions AC power cord to the AC power outlet. The recorder will operate normally. Read these operating instructions carefully before using • Be sure to remove the disc and turn off the recorder after the unit. Follow all
Summary of the content on the page No. 4
Using MPEG4 disc ▌Disc Storage • Disc : CD-R/-RW, DVD-RAM, DVD±R/ DVD±RW, Be careful not to damage the disc because the data on • MPEG4 File with following extensions can be played. : these discs are highly vulnerable to the environment. .avi, .divx, .AVI, .DIVX • Do not keep under direct sunlight. • MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x • Keep in a cool ventilated area. • Available Audio Format : “MP3”, “MPEG”, “PCM”,“AC3”, • Store vertically. “DTS” • Keep in a clean protectio
Summary of the content on the page No. 5
Getting Started • When inserting an unused disc, a message will appear Protection asking whether to initialize the disc or not. If you select This DVD Recorder can allow you to protect the contents "YES", the disc will be formatted in VR mode. of your discs, as described below. • DVD-RW (VR mode) • Program-protection: See page 61 “Locking a Title” - This is a format that is used for recording data on a • Disc-protection: See page 70 “Disc Protection” DVD-RW disc. You can record multiple t
Summary of the content on the page No. 6
Contents Getting Started System Setup ■ Warning ................................................................... 2 ■ Initial Setup ..............................................................26 OSD Language Setup .............................................26 ■ Precaution ............................................................... 3 Important Safety Instructions ..................................3 ■ Using the Setup Menu .............................................26 Handling Cautions
Summary of the content on the page No. 7
Getting Started Playback Additional Information ■ Region code (DVD-Video only) ...............................47 ■ Troubleshooting ....................................................... 73 ■ Logos of Discs that can be played ..........................47 ■ Cable Box/Satellite Receiver Brand Code Table .....75 Cable box brand ......................................................75 ■ Disc types that can be played .................................47 Satellite receiver brand ......................
Summary of the content on the page No. 8
A variety of functions with an easy-to-use user interface General Features The integrated menu system and the messaging function allows you to perform desired operations both easily and The DVD-R157 allows you to record and play high quality conveniently. With a DVD-RAM or DVD-RW (VR mode) digital video on DVD-RAM/DVD±RW/DVD±R discs. disc, you can edit recorded images, create a playlist, and edit videos in a specifi c sequence according to your requirements. High quality digital audio and v
Summary of the content on the page No. 9
Getting Started Before Reading the Instruction How to use the DVD Recorder Manual ▌Step 1 : Select the disc type Make sure to check the following before reading the user’s manual. This unit can record on the following types of discs. If you want to repeatedly record on the same disc or you Icons that will be used in manual want to edit the disc after recording, select a rewritable DVD±RW or DVD-RAM type disc. Icon Term Defi nition If you want to save the recording without making any This inv
Summary of the content on the page No. 10
▌Step 4 : Playing Unpacking To start playback select the title you want to play from the Title list. ▌Accessories A DVD consists of sections called titles, and sub sections called chapters. Check for the supplied accessories below. During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you fi nalize recording on DVD-R/DVD-RW discs in Video mode. You can make your own chapters on DVD+RWs and edit them using the
Summary of the content on the page No. 11
Getting Started To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3. Press and hold the POWER button and enter the two-figure code simultaneously corresponding to the brand of your television by pressing the appropriate number buttons. Brand BUTTON BRAND BUTTON AIWA 82 SABA 57, 72, 73, 74, 75 ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18 SALORA 74 BANG & 57 SAMSUNG 01,02,03,04,05,06,07
Summary of the content on the page No. 12
▌Tour of the Remote Control You can control part of another manufacturer’s TV functions with this remote control. • Buttons that can be controlled on your TV : POWER, INPUT SEL., TV VOL (+/-), CBC/TV CH( / ), TV MUTE, 0~9, TV 100+. 8. REVERSE/FORWARD SEARCH Buttons 17 Press to search a disc backwards or forwards. 9. STOP Button 1 18 2 Press to stop a disc or to stop the recording. 3 19 10. TV VOL Buttons Volume adjustment. 20 11. MENU Button 4 Brings up the DVD recorder’s setup menu. 12.
Summary of the content on the page No. 13
Getting Started Description ▌Front Panel 10 11 12 10 1. POWER Button 8. INPUT SEL. Button Turns the recorder on and off. Select line input signal in external mode. (AV1, AV2, or DV) 2. AV 2 IN Connect external equipment. 9. REC MODE Button Use this to set the desired Recording time and 3. DV-IN picture quality. (XP/SP/LP/EP) Connects external digital equipment with a DV jack. (such as a camcorder) 10. REC Button Starts recording. 4. DISC TRAY Opens to accept a disc. 11. STOP Button
Summary of the content on the page No. 14
▌Rear Panel 1. DIGITAL AUDIO OUT(OPTICAL) 7. AV 1 AUDIO IN Connects to an amplifi er having a digital optical Connect the output of external equipment using audio input jack. audio cables 2. DIGITAL AUDIO OUT(COAXIAL) 8. AV 1 VIDEO IN Connects to an amplifi er having a digital coaxial Connects the output of external equipment audio input jack. using a video cable. 3. AV AUDIO OUT 9. AV 1 S-VIDEO IN Connect to the audio input of external Connects the output of external equipment
Summary of the content on the page No. 15
Connecting & Setting Up Connecting & Setting Up Step 1: Connecting the Antenna Cable This section involves various methods of connecting the DVD Recorder to other external components. ▌ Antenna + Set Top Box Controller + DVD Recorder + TV : Cable box with a video/ audio output or a satellite receiver You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the cable box is turned on. Getting Connected 1. Find
Summary of the content on the page No. 16
Step 2 : Connecting HDMI/DVI to a TV If your TV has a HDMI/DVI input, connect the HDMI/DVI cable to the TV. You will enjoy the best quality image and sound. ▌Connecting to a TV with HDMI Jack Using the HDMI- HDMI cable connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of your TV. Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV screen. ■ T o watch through the HDMI output, set the digital ■ Please chec
Summary of the content on the page No. 17
Connecting & Setting Up ▌Connecting to a TV with DVI Jack Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD Recorder to the DVI IN terminal of your TV. An HDMI to DVI connection requires a separate audio connection, using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD Recorder to the AUDIO (red and white) IN terminals of your TV. Turn on the DVD Recorder and TV. Press the input selector on your TV remote con
Summary of the content on the page No. 18
Step 3 : Connecting the Video Cable There are several ways to connect your DVD Recorder. Select one of the video connections on the following pages. You must use one of the following audio/video connections on this unit. ▌ Connecting to a Video input jack Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on DVD Recorder and VIDEO(yellow) IN jack on the TV (or AV amplifi er). • You will enjoy normal quality images. • Connect the audio cables(white and red) between the AUDIO OUT
Summary of the content on the page No. 19
Connecting & Setting Up ▌ Connecting to an S-Video input jack Connect an S-Video cable(not supplied) between the S-VIDEO OUT jack on DVD Recorder and S-VIDEO IN jack on your TV (or AV amplifi er). • You will enjoy high quality images. S-Video separates ■ S-V ideo or Component video outputs are the picture element into black and white (Y) and color available only if your TV supports S-Video input or (C) signals to present clearer images than regular video Component video input, respectivel
Summary of the content on the page No. 20
▌ Connecting to Component video input jacks (Y,P ,P ) B R 1. Connect the Component video cables(not supplied) ■ Compared to standard interlaced video, between the COMPONENT OUT(Y,PB,PR) jacks on the progressive scan doubles the amount of video DVD Recorder and COMPONENT IN(Y,PB,PR) jacks on lines fed to your TV, resulting in a clearer, more your TV (or AV amplifi er). stable, and fl icker free image than interlaced 2. If the connected TV supports Progressive Scan, press video. The comp
