Summary of the content on the page No. 1
DVDB01
DVD/CD/MP3 Player
Installation and Operation Manual
DVD VCD
WMA MP3
CD
TRACK TITLE CHAPTER DTS EQ CLASSIC POP ROCK
Summary of the content on the page No. 2
DVDB01 INTRODUCTION Thank you for choosing a JENSEN product. We’ve tried to make the instructions in this owner’s • Avoid Moisture. manual clear and easy to follow. If you take a few minutes to look through it, you’ll learn how to use To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture. all of the features of your new JENSEN DVDB01 Mobile Multimedia DVD/CD/MP3 Player for • Use Recommended Accessories: maximum enjoyment. TO REDUCE THE RISK OF FIRE OR E
Summary of the content on the page No. 3
DVDB01 PREPARATION It’s a good idea to read all of the instructions before beginning the installation. We recommend having your JENSEN DVDB01 installed by a reputable installation shop. Tools and Supplies You will need these tools and supplies to install your DVDB01: • Torx type, flat-head and Philips screwdrivers • Wire cutters and strippers • Tools to remove existing radio (screwdriver, socket wrench set or other tools) • Electrical tape • Crimping tool • Volt meter/test light • Crimp connec
Summary of the content on the page No. 4
DVDB01 DVD/CD/MP3 PLAYER MUTE VIDEO IN 2 L AUDIO IN 2 R MODE DVDB01 INSTALLATION DIN Front-Mount Installation CAUTION! Be careful not to damage the vehicle’s wiring. 1. Use the supplied release keys to remove the half-sleeve from the unit. 3. Place the unit in front of the dashboard opening so the wiring can be brought through the mounting sleeve. 4. Complete wiring connections (see “Wiring” on page 7). 5. After completing the wiring connections, turn the unit on to confirm operation (ignition
Summary of the content on the page No. 5
DVDB01 DVD/CD/MP3 PLAYER MUTE VIDEO IN 2 L AUDIO IN 2 R MODE DVDB01 DVD/CD/MP3 PLAYER MUTE VIDEO IN 2 L AUDIO IN 2 R MODE DVDB01 3 2 2 DVD/CD/MP PLAYER MUTE VIDEO IN L AUDIO IN R MODE DVDB01 DIN Rear-Mount Installation DIN Front-Mount Installation 7 8 2 1 4 3 3 Reconnecting the Battery DIN Rear-Mount Installation When wiring is complete, reconnect the battery negative terminal. With some vehicles, you can use the screw holes located on both sides of the unit to fasten the unit to the factory ra
Summary of the content on the page No. 6
DVDB01 WIRING Power/Accessory Connections 1 7 WIRED REMOTE 1. P.A. – Connect to PADIN5. 2. REMOTE CONTROL EXTENDER – Position extender where you are likely to use the remote control. Point remote at eye to control the unit. 3. CONSTANT POWER WIRE (yellow) – Connect the 12V PLUS constant power wire to a live 12 volt wire in the vehicle. Before making a connection, check that the wire you intend to connect it to is always live, even when the car’s ignition is turned off. If a live wire is not foun
Summary of the content on the page No. 7
YELLOW YELLOW RED WHITE RED WHITE YELLOW DVDB01 Audio/Video Connections NOTE: When replacing a fuse, be sure to use correct type and amperage to avoid damaging the DVD player. The DVDB01 uses one 3 amp and one 1 amp ACC fuse, located in line with the power wires. 8
Summary of the content on the page No. 8
DVDB01 CONTROLS AND INDICATORS The buttons located on the unit and the remote control that perform the same function are Remote Control Operation assigned the same number for reference on the diagrams and in the text. Front Panel Operation 3 1 MENU 2 12 1 8 3 24 38 19 4 SHUFFLE 7 33 EQ 29 ENTER DVD VCD 34 30 WMA MP3 CD 8 35 CLASSIC POP ROCK TRACK TITLE CHAPTER DTS EQ VOL 21 VOL 6 9 T/F 31 5 10 16 11 7 5 9 4 6 13 14 15 18 32 PROG LANG RPT TITLE 20 1. Power 11 MODE 2. Infrared Sensor 3. Eject 26
Summary of the content on the page No. 9
DVDB01 Remote Control Functions Ref # Button Function 33 EQ Select the equalization mode, such as CLASSIC, POP, ROCK Ref # Button Function 34 <>/TRACK Search forward rapidly 3 Eject the disc /EJECT 36 0-9 Enter track/chapter number directly. Use GOTO to search. 4 >>|/TRACK Skip to the next track/chapter 37 GOTO Used with numeric buttons to search disc 5 Stop disc playback 38 Press to mute/resume audio. 6 >|| Play/pause the di
Summary of the content on the page No. 10
DVDB01 BASIC OPERATION Turning the Unit On/Off Equalization Press the EQ button (33) on the remote control to activate the equalization function. Continue Press the POWER button (1) on the front panel or remote control to turn the unit on/off. pressing the EQ button to choose between the three equalizer modes (CLASSIC, POP and Inserting a Disc ROCK) or to turn the equalizer function off (DSP OFF). Insert a disc, label side up, into the disc slot (12). The player will start playback automatica
Summary of the content on the page No. 11
DVDB01 CD/DVD/VCD OPERATION Repeating Playback 2 12 1 8 3 Press the RPT button (20) on the remote control to select the repeat mode as follows: DVD: CHAPTER > TITLE > REP ALL > OFF VCD/CD: REP 1 > REP ALL > OFF • Select CHAPTER to continuously repeat the current chapter. • Select TITLE to continuously repeat the current title. • Select REP 1 to continuously repeat the current track. DVD VCD • Select REP ALL to continuously repeat all chapters/tracks on the current disc. After playing WMA MP3 CD
Summary of the content on the page No. 12
DVDB01 Goto Search On-Screen Display Function During DVD or VCD playback, perform the following steps to use the GOTO feature to access a Press the display ( ) button (17) during playback to view playback information at the top of the specific location on a disc: screen. Title/Chapter Search DVD Playback Information To play a specific title/chapter: The following information is displayed at the top of the screen during DVD playback: 1. Press the GOTO button (37) button. The On Screen Display
Summary of the content on the page No. 13
DVDB01 CD Playback Information The following information is displayed at the top of the screen during CD playback: • TRK ##/## – “1/18” indicates the first of 18 tracks on the CD is currently playing. • – “X” indicates repeat play is OFF, “1” indicates repeat track, and “A” indicates repeat disc. • Press repeatedly to view the following information for elapsed/remaining playing time: • 00:02:18 – total elapsed playing time for disc • C –00 :34 :37 – remaining playing time • T 00:02:18 – total
Summary of the content on the page No. 14
DVDB01 MP3 OPERATION Select one of these icons to access the corresponding media on your disc or USB device. If the media type is not present, the icon will not be selectable. 2 12 1 8 3 • : Audio • : Photos • : Video DVD VCD Stopping Play WMA MP3 CD CLASSIC POP ROCK • Press the stop button (5) on the front panel or remote control to stop disc play. TRACK TITLE CHAPTER DTS EQ • Press the >|| button (6) to resume normal playback. • Press the stop button (5) on the front panel or remote contro
Summary of the content on the page No. 15
DVDB01 Random Playback MP3 Playback Information Press the SHUFFLE button (19) on the remote control to select and play tracks in random order. The following information is displayed at the top of the screen during CD playback: The display will show “RANDOM”. Press the >|| button to begin the shuffled playback. Press the SHUFFLE button again to turn shuffle off. Playing in Programmed Order • TRK ##/## – “9/150” indicates the ninth of 150 tracks on the disc is currently playing. 1. Press the PROG
Summary of the content on the page No. 16
DVDB01 DVD SETUP MENU RATING: Select the parental control level for all DVD play. The security password is required to Press the (setup) button (29) on the remote control to access the SYSTEM SETUP menu and make changes to this feature. adjust system settings for the following categories: DEFAULT: Use this item to restore default settings at any time. • System Setup • Language Setup Language Setup • Audio Setup The Language Setup menu controls the • Video Setup following features: • Digital
Summary of the content on the page No. 17
DVDB01 Audio Setup The Audio Setup menu controls the following features: AUDIO SETUP KEY # +4 +2 0 -2 -4 b Key: This item changes the audio output key. 18
Summary of the content on the page No. 18
DVDB01 DISC SYMBOLS AND PROPERTIES Table 1: Disc Properties Symbol 12cm Disc Properties Max Play Time (MPEG 2 Method) Single side single layer (DVD-5) 133 minutes Single side double layer (DVD-9) 242 minutes Double side single layer (DVD-10) 266 minutes Double side double layer (DVD-18) 484 minutes (MPEG 1 Method) Single side single layer (Video CD) 74 minutes Single side single layer 74 minutes Single side single layer 74 minutes Table 2: DVD Disc Symbols Symbol Meaning Number of voice language
Summary of the content on the page No. 19
DVDB01 TROUBLESHOOTING Problem Cause Corrective Action Unit will not power on Radio Fuse blown Install new fuse with correct rating Car battery fuse blown Install new fuse with correct rating Illegal operation Press the RESET button located in the bottom right corner of the front panel Remote control does not function Battery depleted Replace battery with new one Battery installed incorrectly Remove battery and install correctly Poor sound quality or distortion Pirated disc is in use Use origina
Summary of the content on the page No. 20
DVDB01 SPECIFICATIONS LIMITED WARRANTY Supply Voltage: 12V DC (11V-15V), negative ground 90 Day / 12 Month Limited Warranty Current Consumption: Less than 2A AUDIOVOX SPECIALIZED APPLICATIONS, LLC (the Company) warrants to the original retail Signal System: Composite video 1.0Vp-p 75ohms purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original Discs Played:
