Summary of the content on the page No. 1
H- CMD7078
DVD/CD/MP3-RECEIVER DVD/CD/MP3-
Instruction manual
Summary of the content on the page No. 2
Dear customer! Thank you for purchasing our product. For safety, it is strongly recommended to read this manual carefully before connecting, operating and/or adjusting the product and keep the manual for reference in the future. Table of contents Tabl of contents....................................................................................................................................................2 Importansafeguards.....................................................................
Summary of the content on the page No. 3
Important safeguards · Using the device at temperature below -10º may cause the breakage of the device. BEFORE USING PLEASE HEAT UP THE PASSENGER COMPARTMENT TO THE RECOMMENDED TEMPERATURE! · Read carefully through this manual to familiarize yourself with this high-quality sound system. · Disconnect the vehicle's negative battery terminal while mounting and connecting the unit. · When replacing the fuse, be sure to use one with an identical amperage rating. Using a fuse with a higher amperage ra
Summary of the content on the page No. 4
Installation/Connections First complete the electrical connections, and then check them for correctness. Installation opening This unit can be installed in any dashboard having an opening as shown below. The dashboard should be 4.75 5.56 mm thick in order to be able to support the unit. 1. Insert mounting collar into the dashboard, and bend the mounting tabs out with a screwdriver. Make sure that lock lever is flush with the mounting collar (not projecting outward). 2. Secure the rear of th
Summary of the content on the page No. 5
Electrical connections 5
Summary of the content on the page No. 6
Do not interchange the connection of the wiring!!! For some car models you may need to modify wiring of the supplied power cord as illustrated (modified wiring), or else the memory of the unit may be lost after you power off. Contact your authorized car dealer before installing this unit. Using the ISO Connector 1. If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated. 2. For connections without the ISO connectors, check the wiring in the vehicle carefull
Summary of the content on the page No. 7
Panel controls Front panel 1. MUTE button Press it to cut down the volume output, press it again to resume volume. 2. PWR button Press PWR to turn the power on. Press again to turn the power off. 3. BAND button Press it repeatedly to select your desired radio band (FM1, FM2, FM3, FM (OIRT), AM1, AM2) during RADIO mode. 4. NEXT / PREVIOUS buttons Use these buttons to search for the beginnings of the next/ previous tracks or manual seek tuning. 7
Summary of the content on the page No. 8
5. AF button Press it to activate the AF function. Press it for 2 seconds to choose REG ON, press it again for 2 seconds to switch to REG OFF. 6. TA button Press it to activate the TA function. Press it for 2 seconds to choose ST, press it again for 2 seconds to switch to MONO. 7. PTY button Press it to activate the PTY function. Press PTY button for 2 seconds to choose LOCAL, press it again for 2 seconds to switch to DX. 8. button Press it to open the panel. 9. SD/ MMC card socket 10. LCD displ
Summary of the content on the page No. 9
17. PLAY/ PAUSE button Use this button to play or pause playback. Under the pause status, press it to play. 18. PRESET STATION [1-6] buttons 19. VOL knob (rotate it to adjust the volume)/ MENU/SEL button (during VCD/ DVD playback, press more then 2 seconds to display the root menu of the disc. Repeatedly press SEL to select modes: VOL, BAS, TRE, BAL, FAD; rotate the knob to adjust the level). 20. AMS button Press it to activate the Radio Auto preset function. 21. SRC button Press to select the s
Summary of the content on the page No. 10
Back of the front panel Press the button to open the panel and press to eject the disc. Disc eject Disc slot: insert a disc for playback here SD/ MMC card jack USB jack Reset hole Panel status indicator Note: Pressing the RESET hole will erase the clock setting and stored stations. Panel status indicator lights up when you slide the panel down; flashes when you remove the panel. 10
Summary of the content on the page No. 11
Remote control 1. ZOOM button 2. TITLE button 3. PWR button 4. Setup button 5. Directional buttons for menu selection 6. ENTER button 7. PROGRAM button 8. Digit area 9. SELECT button (to select basic sound setting options) 10. VOLUME button 11. MUTE button 12. RADIO TUNE/ NEXT , PREVIOUS button 13. Select subtitle language 14. SRC button 15. REPEAT button 16. A B button 17. STOP button 18. PLAY/PAUSE button 19. GOTO button 20. MENU PBC button 21. On Screen Display button 22. AUDIO button 23. DIS
Summary of the content on the page No. 12
Battery information of remote controller 1. Press the catch and at the same time pull out the battery tray. 2. Insert the 1 x lithium battery, type CR 2025 3V battery with the stamped (+) mark facing upward. Insert the battery tray into the remote control. Warning: Store the battery where children cannot reach. If a child accidentally swallows the battery, consult a doctor immediately. Do not recharge, short, disassemble or heat the battery or dispose it in a fire. Do not expose or bring into co
Summary of the content on the page No. 13
Glossary PBC (PlayBack Control) PlayBack Control is a menu recorded on the disc with SVCD or VCD2.0 format. For the discs contained PBC, it can playback interactive software with the menu displayed on TV. And if the disc contains still images, it can playback high definition of still image. Title The title is the important part of DVD disc. The memory volume of the disc is rather big, that makes possible to record several films on one disc. For example, if a disc contains three films, they may b
Summary of the content on the page No. 14
Features Fully compatible Fully compatible with the most popular discs formats such as DVD, CD, CD-R (containing MP3, JPEG), CD-RW represented in the market. Upgrade intelligently Support the function of upgrading the software for playing discs of new formats to keep up with the market competition. Strong output function The player has an analogue audio output of 2 channels, digital audio output and video output of complex video. Supports picture CD, Photo CD Fully compatible with Picture CD and
Summary of the content on the page No. 15
Compatible discs DVD Video DVD disc include video and audio data. The data can contained by the 12 cm diameter of DVD disc is 7 times of one can contained by the common CD-R disc. Its maximum continuous playback time can be up to 2 hours (one of double-sided disc can be up to 4 hours). DVD disc sort as 4 kinds of ones: single-layer and double-layers and single-sided, single layer and double-sided, double-layers and double-sided disc. SVCD Super VCD disc adopt MPEG-II compression way. It can prov
Summary of the content on the page No. 16
Photo-CD Compatible with Photo-CD disc. Do not need setting the additional soft ware. Photo-CD is a disc format that stores photo with electronic file format developed by Konica company. CD-R/CD-RW Compatible with CD-R/CD-RW disc with ISO9660 specification include the format of MP3, JPG, JPEG, Ac3, PCM, MPG, MPE, WMA, MP4. DVD+/-R Compatible with DVD+/-R disc with UDF specification include the format of MP3, JPG, JPEG, Ac3, PCM, MPG, MPE, WMA, MP4. 16
Summary of the content on the page No. 17
General operation Power on/ off Press PWR button on the front panel or RC to turn the unit on. Press again to switch the set to turn the unit off. When you switch off the system or car ignition, the settings, tuner presets and the volume level will be retained in the unit s memory. Source select Press SRC button once or more to select your desired function: DISC, Tuner (Radio), USB, Card. Note: the USB and Card items will be available if the USB or SD/ MMC card is in. If you select Radio mode, p
Summary of the content on the page No. 18
- BALANCE control Display shows the BALANCE level. - FADER control Display shows the FADER level. Push the knob for more then 2 seconds to enter the menu and select the mode: TA VOL mode: rotate the knob to adjust the TA volume. EQ mode: rotate the knob to select EQ sound effect: ROCK, POP, CLASSIC, FLAT, EQ OFF. LOUD mode: rotate the knob to choose the loud ON or OFF. BEEP mode: rotate the knob to choose the beep sound ON or OFF. 12/24 hours mode: rotate the knob to choose the 12 or 24 hours mo
Summary of the content on the page No. 19
Turning the sound off Press the MUTE button to turn the sound off. Press it again or use the VOLUME buttons to turn the sound on. Adjusting clock · Displaying time: Press DISP button to display the current time on the LCD, it returns to original in 5 seconds. · Setting time: Press DISP again for more than2 seconds to select the hour setting. Rotate the knob to set the hours. Press the knob to make the minute start blinking. Rotate the knob to set the minutes. Press DISP again to exit the clock s
Summary of the content on the page No. 20
Digital tuner Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press PWR to turn the power on, then press the SRC button once or more to select TUNER. Press BAND button once or more to select: FM1, FM2, FM3, FM (OIRT), AM1, AM2 (for 2 bands). Manual/ automatic tuning · Manual tuning: press the / buttons repeatedly to select a station downward or upwar
