Summary of the content on the page No. 1
720-Disc DVD Library
DRM-7000
Operating Instructions
Manual Version 1.2
Released 26-February-2004
Pioneer Electronics (USA), Inc.
Summary of the content on the page No. 2
DRM-7000 Operating Instructions (For US/Canadian Models) CAUTION • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. • The use of optical instruments with this product will increase eye hazard. WARNING This is a class A product. In a domestic environment this product may cause radio interference in which the user may be required to take adequate measures. This equipment has been tested and f
Summary of the content on the page No. 3
DRM-7000 Operating Instructions Table of Contents 1.0 FEATURES OF THE DRM-7000 DISC CHANGER .......................................................................... 1 1.1 FLEXIBLE UNIT DESIGN.................................................................................................................. 1 1.2 TYPES OF DISC MAGAZINES........................................................................................................... 1 1.3 EASE OF INSTALLATION......................
Summary of the content on the page No. 4
DRM-7000 Operating Instructions 5.2.5.2 Remove........................................................................................................................................ 35 5.2.5.3 Add............................................................................................................................................... 35 5.2.6 Hyper Submode................................................................................................................. 36 5.2.7 Probe Su
Summary of the content on the page No. 5
DRM-7000 Operating Instructions 1.0 Features of the DRM-7000 Disc Changer 1.1 Flexible Unit Design The Pioneer DRM-7000 Disc Changer is designed so that a various components may be installed together to meet a variety of needs. The Pioneer DRM-7000 provides easily, accessed bays on both the front and the back of the unit as well as a hyper-magazine bay on the front. The bays support drives and/or 50-disc magazines and are fitted with access panels for the installation or removal of ind
Summary of the content on the page No. 6
DRM-7000 Operating Instructions 1.4 Security Features To prevent erroneous or unauthorized use, operators must be able to enter the system administration mode from the Control Panel. In order to enter this mode, unlock the mechanism using the provided keys. This feature also guards against interference, conflicts and clashes occurring between operations performed from the Control Panel and commands issued by the HOST computer. An alternative method is to issue a command from the HOST
Summary of the content on the page No. 7
DRM-7000 Operating Instructions 2.0 Handling Precautions 2.1 Installation Site Select an installation site with a flat, solid surface. Check the area for the following conditions: • Avoid exposure to direct sunlight, spotlights or too near to a heater • Beware of high humidity locations or sites exposed to large amounts of dust • Avoid close proximity to a bathroom or a kitchen • Maintain a distance from any large electrical apparatus (refrigerator, air conditioner. etc.) • Stay away
Summary of the content on the page No. 8
DRM-7000 Operating Instructions benzine, thinner, insecticide or other strong chemicals as these may dissolve or discolor the cabinet surface. Some commercially produced chemical polishing clothes may be acceptable but read all instructions and warnings first. 2.5 Managing Offline Media The DRM-7000 provides the following features to manage of offline media. • Removable Disc Magazines Disc magazines may be removed from the Changer without removing the discs inside thus making it possi
Summary of the content on the page No. 9
DRM-7000 Operating Instructions • Two drives installed on separate cables • Both drives are connected to the internal daisy-chain board using the cables provided (it is necessary to purchase another SCSI cable to connect the Changer to the HOST) To install three or more drives or to use more than one SCSI bus (to increase data transfer rates), it is necessary to purchase additional SCSI boards and cables. The following factors are key in selecting the appropriate components for your syst
Summary of the content on the page No. 10
DRM-7000 Operating Instructions • 20-Disc Hyper Magazine Dust Cover • Operating Instructions • Warranty Information • Service Network Sheet 2.8 Add-On Products The following components may be purchased separately for use with the Pioneer DRM-7000 Changer. • 50-Disc Locking Magazine (DRM-AL751) This magazine is designed to maximize security. The locking mechanism prevents removing a disc from a magazine through commands to the Changer. Use the Mail Slot to add or exchange discs in
Summary of the content on the page No. 11
DRM-7000 Operating Instructions conjunction with the internal daisy-chain board, it is possible to connect up to six internal drives. 2.9 Discs The types of discs compatible with the Pioneer DRM-7000 vary depending upon the types of installed drives. Refer to the User’s Guides provide with the drives. Some standard handling practices are listed below. • Use CDs marked with the following symbols • Avoid touching the signal surface of the disc • Hold the disc by placing your fingers
Summary of the content on the page No. 12
DRM-7000 Operating Instructions 3.0 Names and Functions of Individual Parts - 8 -
Summary of the content on the page No. 13
DRM-7000 Operating Instructions - 9 -
Summary of the content on the page No. 14
DRM-7000 Operating Instructions 4.0 Installation 4.1 Positioning the Changer The instructions below lead through the physical installation of the DRM-7000. 1. Attach the placement fixtures To stabilize the Changer further, attach the placement fixtures at the corners of the unit • Always be sure to attach the placement fixtures first • Verify that the placement fixtures are protecting the ports and cables on the back of the unit Please note that any damage caused to the rear ports
Summary of the content on the page No. 15
DRM-7000 Operating Instructions 3. Lock all four legs/wheels into place 4. Connect the power cord to the Changer • Insert the power cord into the rear of the changer before inserting the plug into the wall socket Caution: Always be sure to use only a power cord designed for use in that country. 4.2 Before Using the Changer for the First Time To prepare the Changer for standard operation, follow the steps listed below. 1. Turn ON the power to the Changer When the power is
Summary of the content on the page No. 16
DRM-7000 Operating Instructions 2. Loosen the shipping screws With the front access panel open, loosen the two screws located in the base • Screws are permanent to avoid becoming lost but must be loosened to operate the Changer • Tighten these screws before moving or transporting the Changer • Closing the front and/or rear access panels cause the Changer to return to the initial default position thus leave access panels open to continue with the installation process 3. Install t
Summary of the content on the page No. 17
DRM-7000 Operating Instructions 5. Connect the Changer Interface cable to the drive. • Confirm that the interface cable is connected to the correct bay Caution: Connecting the interface cable to an incorrect bay port results in damage to the discs. • Install an add-on connector board if necessary 4.3 Changing the SCSI ID on a DRM-7000 To alter the Changer’s SCSI ID, power the system OFF then press the SCSI ID switches located on the back of the unit in the lower left area. Press
Summary of the content on the page No. 18
DRM-7000 Operating Instructions SCSI buses allows duplicate SCSI IDs as long as the duplicates are assigned to separate buses. Even if none of the drives installed within the changer has been assigned the same SCSI ID, it is necessary to assign a different SCSI ID to any drives which share the same ID with other devices such as hard drives on the same bus. 4.5 Connecting SCSI Cables Confirm that all drives have been installed, before connecting the SCSI cables. Check that all conditi
Summary of the content on the page No. 19
DRM-7000 Operating Instructions Daisy-chain six internal readers and a Connect two readers and two recorders recorder then connect the Changer – then connect the Changer – requires requires a cable for four drives three separate SCSI controller cards 4.6 Inserting Disc Magazines Please review the insertion methods listed below. • Insert discs into a standard 50-disc magazine then insert the magazine into the Changer. • Insert discs into a standard 20-disc hyper-magazine then insert the
Summary of the content on the page No. 20
DRM-7000 Operating Instructions 2. Insert discs horizontally with the labels facing up. 3. Turn the release knob to the horizontal position locking the discs into the slots. Note: Turning the magazine upside-down with the locking mechanism disengaged may result in damage to the discs. 4. Insert the magazine onto the guide rails within the DRM-7000. * Hold the handle of the magazine while resting the unit on the guide rails. * Elevate the magazine until it is perpendicular to the Chang
