Summary of the content on the page No. 1
Instruction Manual
DVD-AR650
www.samsung.com
AK68-01378A
0 01378A-AR650-XAA-ENG.indb 1 1378A-AR650-XAA-ENG.indb 1 2 2007-03-13 오전 11:53:28 007-03-13 오전 11:53:28
Summary of the content on the page No. 2
Getting Started If this equipment does cause harmful interference to radio or Warning television reception, which can be determined by turning the TO REDUCE THE RISK OF ELECTRIC SHOCK, equipment off and on, the user is encouraged to try to correct DO NOT REMOVE THE COVER(OR BACK). the interference by one or more of the following measures: NO USER-SERVICEABLE PARTS ARE INSIDE. REFER • Reorient or relocate the receiving antenna. SERVICING TO QUALIFIED SERVICE PERSONNEL. • Increase the separat
Summary of the content on the page No. 3
Getting Started • Exterior interference such as lightning and static Precaution electricity can affect normal operation of this recorder. If this occurs, turn the recorder off and on again with the POWER button, or disconnect and then reconnect the ▌Important Safety Instructions AC power cord to the AC power outlet. The recorder will operate normally. Read these operating instructions carefully before using • Be sure to remove the disc and turn off the recorder after the unit. Follow all
Summary of the content on the page No. 4
Using MPEG4 disc ▌Disc Storage • Disc : CD-R/-RW, DVD-RAM, DVD-R/ DVD-RW, Be careful not to damage the disc because the data on • MPEG4 File with following extensions can be played. : these discs are highly vulnerable to the environment. .avi, .divx, .AVI, .DIVX • Do not keep under direct sunlight. • MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x • Keep in a cool ventilated area. • Available Audio Format : “MP3”, “MPEG”, “PCM”,“AC3”, • Store vertically. “DTS” • Keep in a clean protectio
Summary of the content on the page No. 5
Getting Started • When inserting an unused disc, a message will appear Protection asking whether to initialize the disc or not. If you select This DVD Recorder can allow you to protect the contents "YES", the disc will be formatted in VR mode. of your discs, as described below. • DVD-RW (VR mode) • Program-protection: See page 69 “Locking a Title” - This is a format that is used for recording data on a • Disc-protection: See page 76 “Disc Protection” DVD-RW disc. You can record multiple t
Summary of the content on the page No. 6
Contents Getting Started ■ Step 5 : Connecting External Devices .....................26 Connecting a VCR, Cable box/Satellite receiver (set top box) or DVD Player to the AV 1 IN or ■ Warning ................................................................... 2 S-VIDEO IN Jacks ...................................................26 ■ Precaution ............................................................... 3 Connecting a Camcorder ........................................27 Important Safety Inst
Summary of the content on the page No. 7
Getting Started Recording Editing ■ Recordable discs .....................................................44 ■ Basic Editing (Title List) ...........................................68 Compatibility between Samsung and Other Renaming (Labeling) a Title ....................................68 manufacturer's Recorders .......................................44 Locking (Protecting) a Title ......................................69 Deleting a Title .......................................................
Summary of the content on the page No. 8
A variety of functions with an easy-to-use user interface General Features The integrated menu system and the messaging function allows you to perform desired operations both easily and The DVD-AR650 allows you to record and play high conveniently. With a DVD-RAM or DVD-RW (VR mode) quality digital video on DVD-RAM/DVD-RW/DVD-R discs. disc, you can edit recorded images, create a playlist, and edit videos in a specifi c sequence according to your requirements. High quality digital audio and
Summary of the content on the page No. 9
Getting Started Before Reading the Instruction How to use the DVD Recorder Manual ▌Step 1 : Select the disc type Make sure to check the following before reading the This unit can record on the following types of discs. user’s manual. If you want to repeatedly record on the same disc or you want to edit the disc after recording, select a rewritable Icons that will be used in manual DVD-RW or DVD-RAM type disc. Icon Term Defi nition If you want to save the recording without making any changes,
Summary of the content on the page No. 10
▌Step 4 : Playing Unpacking To start playback select the title you want to play from the Title list. ▌Accessories A DVD consists of sections called titles, and sub sections called chapters. Check for the supplied accessories below. During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you fi nalize recording on DVD-R/DVD-RW discs in Video mode. ▌Step 5 : Editing a recorded disc Video/Audio Cable IR Blaster cab
Summary of the content on the page No. 11
Getting Started To determine whether your television is compatible, follow the instructions below. 1. Switch your television on. 2. Point the remote control towards the television. 3. Press and hold the TV POWER button and enter the two-figure code simultaneously corresponding to the brand of your television by pressing the appropriate number buttons. Brand BUTTON BRAND BUTTON AIWA 82 SABA 57, 72, 73, 74, 75 ANAM 10, 11, 12, 13, 14, 15, 16, 17, 18 SALORA 74 BANG & 57 SAMSUNG 01,02,03,04,05,06
Summary of the content on the page No. 12
▌Tour of the Remote Control You can control certain functions of another manufacturer's TV with this remote control. • Buttons that can be controlled on your TV : TV POWER, INPUT SEL., TV VOL (+/-), CH ( / ), TV MUTE, 0~9. 13. TITLE LIST/DISC MENU Button 20 Use this to enter the View Recording list/Disc menu. 14. ANYKEY Button 1 21 Use this to view the status of the disc that is being 2 played. 3 22 15. TIMER/EPG RED Button 23 Press this to enter the Timer Recording Mode menu. Set the Ti
Summary of the content on the page No. 13
Getting Started Description ▌Front Panel 1. POWER Button 9. INPUT SEL. Button Turns the recorder on and off. Selects line input signal in external mode. (Analog Ch, Digital Ch, AV1, AV2, DV) 2. AV 2 IN This allows you to select a TV signal or Connect external equipment. connected external equipment for recording 3. DV-IN purposes. Connects external digital equipment with a DV 10. CH ( / ) jack. (such as a camcorder) Select channels. 4. DISC TRAY 11. REC Button Opens to accept a disc.
Summary of the content on the page No. 14
▌Rear Panel Fan The fan always revolves when the power is on. Ensure a minimum of 4” clear space on all sides of the fan when installing the product. 1. HDMI OUT (best video quality) 7. COMPONENT VIDEO OUT Connects the input of external equipment using (excellent video quality) a HDMI cable. Connect to equipment having Component video input jacks. 2. DIGITAL AUDIO OUT(OPTICAL) Connects to an amplifi er having a digital optical 8. AV 1 AUDIO IN audio input jack. Connect the output of
Summary of the content on the page No. 15
Connecting & Setting Up Connecting & Setting Up Step 1: Connecting the Antenna Cable There are several ways to connect your DVD Recorder. Select the antenna connection that best suits you below. ▌Antenna + DVD Recorder + TV You can record non-scrambled channels by selecting the channel on the DVD Recorder. Also use this method if you watch channels without without a cable box or satellite receiver (set top box). ■ The VHF/UHF ANT (RF) OUT jack of this product sends only signals received throug
Summary of the content on the page No. 16
▌ Antenna + Cable box or satellite receiver (set top box) + DVD Recorder + TV : Cable box/Satellite receiver with a video/audio output You can record channels by selecting the channel on the cable box or satellite receiver (set top box). You cannot record one channel while watching another channel. Be sure that the cable box or satellite receiver (set top box) is turned on. Connecting the IR Blaster cable into the Cable Box Control jack (Press and release the power button each time you The C
Summary of the content on the page No. 17
Connecting & Setting Up ▌ Antenna + Cable box or satellite receiver (set top box) + DVD Recorder + TV : Cable box/Satellite receiver with an antenna output only You can record non-scrambled channels by selecting the channel on the DVD Recorder. You cannot record scrambled channels that require a cable box. English - 17 0 01378A-AR650-XAA-ENG.indb 17 1378A-AR650-XAA-ENG.indb 17 2 2007-03-13 오전 11:54:27 007-03-13 오전 11:54:27
Summary of the content on the page No. 18
Step 2 : Connecting HDMI/DVI to a TV If your TV has an HDMI/DVI input, connect the HDMI/DVI cable to the TV. You will enjoy the best quality image and sound. ▌Connecting to a TV with HDMI Jack Using an HDMI-HDMI cable, connect the HDMI OUT jack on the rear of the DVD Recorder to the HDMI IN jack of your TV. Turn on your TV, then the DVD Recorder. Press the input selector on your TV remote control until the HDMI signal from the DVD Recorder appears on your TV screen. ■ To watch through the HDM
Summary of the content on the page No. 19
Connecting & Setting Up ▌Connecting to a TV with DVI Jack Using the HDMI-DVI cable (not included), connect the HDMI OUT terminal on the rear of the DVD Recorder to the DVI IN terminal of your TV. An HDMI to DVI connection requires a separate audio connection, using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD Recorder to the AUDIO (red and white) IN terminals of your TV. Turn on your TV, then the DVD Recorder. Press the input selector on your TV rem
Summary of the content on the page No. 20
Step 3 : Connecting the Video Cable If you have not connected to your TV via HDMI/DVI, select one of the video connections on the following pages. ▌Connecting to Component Video Input Jacks (Y,PB,PR) 1. Connect the Component video cables(not supplied) ■ Compared to standard interlaced video, between the COMPONENT OUT(Y,PB,PR) jacks on the progressive scan doubles the amount of video DVD Recorder and COMPONENT IN(Y,PB,PR) jacks on lines fed to your TV, resulting in a clearer, more your TV (
