Summary of the content on the page No. 1
Instruction Manual
DVD-VR350
www.samsung.com/ca
English Français
AK68-01344A(00)
0 01344A-VR350-XAC-ENG.indb 1 1344A-VR350-XAC-ENG.indb 1 2 2007-03-13 오후 5:05:28 007-03-13 오후 5:05:28
Summary of the content on the page No. 2
Getting Started Warning ■ This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere. TO REDUCE THE RISK OF ELECTRIC SHOCK, ■ This DVD Recorder & VCR is designed and DO NOT REMOVE THE COVER(OR BACK). manufactured to respond to the Region NO USER-SERVICEABLE PARTS ARE INSIDE. REFER Management Information. If the Region number SERVICING TO QUALIFIED SERVICE PERSONNEL. of a DVD disc does not correspond to the Region number of this , the DVD Recorder & VC
Summary of the content on the page No. 3
Getting Started • Exterior interference such as lightning and static Precaution electricity can affect normal operation of this recorder. If this occurs, turn the DVD Recorder & VCR off and on again with the POWER button, or disconnect and then ▌Important Safety Instructions reconnect the AC power cord to the AC power outlet. The recorder will operate normally. Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. • Be sure to
Summary of the content on the page No. 4
Using MPEG4 disc ▌Disc Storage • Disc : CD-R/-RW, DVD-RAM, DVD±R/ DVD±RW, Be careful not to damage the disc because the data on • MPEG4 File with following extensions can be played. : these discs are highly vulnerable to the environment. .avi, .divx, .AVI, .DIVX • Do not keep under direct sunlight. • MPEG4 Codec format : DivX 3.11 DivX 4.x DivX 5.x • Keep in a cool ventilated area. • Available Audio Format : “MP3”, “MPEG”, “PCM”,“AC3”, • Store vertically. “DTS” • Keep in a clean protection
Summary of the content on the page No. 5
Getting Started • When inserting an unused disc, a message will appear Protection asking whether to initialize the disc or not. If you select • Program-protection: See page 68 “Locking a Title” "YES", the disc will be formatted in VR mode. • Disc-protection: See page 76 “Disc Protection” • DVD-RW (VR mode) DVD-RAM/DVD-R W/DVD-R discs that are incompatible - This is a format that is used for recording data on DVD- with the DVD-VIDEO format cannot be played with this RW disc. You can record
Summary of the content on the page No. 6
Contents Getting Started System Setup ■ Warning ................................................................... 2 ■ On-Screen Menu Navigation ...................................26 ■ Precaution ............................................................... 3 ■ Auto Clock Set .........................................................26 Important Safety Instructions ..................................3 ■ Manual Clock Set ....................................................27 Handling Cautions ..
Summary of the content on the page No. 7
Getting Started ■ Playing Back an Audio CD (CD-DA)/MP3 ...............47 Editing Buttons on the Remote Control Used for Audio CD ■ Playing the Title List ................................................67 (CD-DA)/MP3 Playback ..........................................47 ■ Basic Editing (Title List) ...........................................68 Playing an Audio CD (CD-DA) ...............................47 Renaming(Labeling) a Title .....................................68 Playing an MP3 Disc ...
Summary of the content on the page No. 8
A variety of functions with an easy-to-use user General Features interface The Integrated menu systems and messaging functionality The DVD-VR350 allows you to record and play high allow you to perform the desired operations easily and quality digital video on DVD-RAM/DVD-RW/DVD-R discs. conveniently. With a DVD-RAM/DVD-RW(VR mode) disc, you can edit recorded images, create playlist, and edit videos in a specifi c sequence according to your needs. High quality digital audio and video recordin
Summary of the content on the page No. 9
Getting Started Before Reading the User’s Manual How to use the DVD Recorder & VCR Make sure to check the following terms before reading ▌Step 1 : Select the disc type the user’s manual. This unit can record on the following types of discs. Icons that will be used in manual If you want to repeatedly record on the same disc or you Icon Term Defi nition want to edit the disc after recording, select a rewritable This involves a function available DVD-RW or DVD-RAM type disc. If you want to save a
Summary of the content on the page No. 10
▌Step 4 : Playing Unpacking To start playback, select the title you want to play from the title list. ▌Accessories A DVD consists of sections called titles, and sub sections called chapters. Check for the supplied accessories below. During recording, a title is created between two points where you start and stop recording. Chapters will be created automatically when you fi nalize recording on DVD-R/DVD-RW discs in Video mode. ▌Step 5 : Editing a recorded disc Video/Audio Cable RF Cable for
Summary of the content on the page No. 11
Getting Started ▌Preparing the Remote Control ■ If several codes are indicated for your television brand, try each one in turn until you fi nd one Install Batteries in the Remote Control that works. If you replace the remote control’s • Open the battery cover on the back of the remote batteries, you must set the brand code again. control. You can then control the television using the following • Insert two AAA batteries. Make sure that the polarities buttons. (+ and -) are aligned correct
Summary of the content on the page No. 12
▌Tour of the Remote Control You can control part of another manufacturer’s TV functions with this remote control. • Buttons that can be controlled on your TV : TV POWER, INPUT SEL., TV VOL +/-, CH/TRK ( / ), TV MUTE, 0~9, 100+ Button. 10. ENTER/DIRECTION Buttons 1 18 (UP/DOWN or LEFT/RIGHT Buttons) This button functions as a toggle switch. 2 19 11. INFO Button 20 Press this to display current setting or disc status. 3 21 12. TITLE LIST/DISC MENU Button Press this to enter the TITLE LIST/Dis
Summary of the content on the page No. 13
Getting Started Description ▌Front Panel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1. DVD DECK 9. P.SCAN BUTTON 2. DVD OPEN/CLOSE BUTTON 10. FRONT PANEL DISPLAY 3. VCR DECK 11. DVD/VCR SELECT BUTTON 4. VCR EJECT BUTTON 12. COPY BUTTON 5. POWER BUTTON 13. CH ( / ) BUTTON 6. VIDEO INPUT JACK (AV 2 IN) 14. RECORD BUTTON 7. AUDIO L, R INPUT JACKS (AV 2 IN) 15. STOP BUTTON 8. DV INPUT JACK 16. PLAY/STILL BUTTON ▌Front Panel Display 1 2 3 4 5 6 10 7 8 9 1. DVD is activated. 7. DVD or CD media is loaded.
Summary of the content on the page No. 14
▌Rear Panel 1 2 3 4 5 6 7 8 9 10 11 Fan The fan always revolves when the power is on. Ensure a minimum of 4” clear space on all sides of the fan when installing the product. 1. VIDEO INPUT JACK (AV 1 IN) 7. AUDIO INPUT JACKS (AV 1 IN) 2. VIDEO OUT JACK (AV OUT) 8. AUDIO OUT JACKS (AV OUT) 3. AUDIO OUT JACKS (COMPONENT OUT) 9. DIGITAL AUDIO OUT JACK (OPTICAL) 4. S-VIDEO IN/OUT JACKS 10. DIGITAL AUDIO OUT JACK (COAXIAL) 5. ANT IN JACK 11. VIDEO OUT JACKS (COMPONENT OUT) 6. ANT OUT (TO TV) JACK En
Summary of the content on the page No. 15
Connections Connecting & Setting Up Connecting the Antenna Cable There are several ways to connect your DVD Recorder & VCR. Select the antenna connection that best suits you below. ▌Antenna + DVD Recorder & VCR + TV : No Cable box You can record non-scrambled channels by selecting the channel on the DVD Recorder & VCR. Also use this method if you watch channels without a cable box. ■ If you are using an off-air antenna that has ■ If you have two separate antennas (one VHF and 300-ohm twin fl
Summary of the content on the page No. 16
▌ Antenna + Cable box + DVD Recorder & VCR + TV : Cable box with many scrambled channels You can record channels by selecting the channel on the cable box. You cannot record one channel while watching another channel. Be sure that the cable box is turned on. English - 16 01344A-VR350-XAC-ENG.indb 16 01344A-VR350-XAC-ENG.indb 16 2 2007-03-13 오후 5:06:53 007-03-13 오후 5:06:53 Connections
Summary of the content on the page No. 17
Connections ▌ Antenna + DVD Recorder & VCR + Cable box + TV : Cable box with a few scrambled channels You can record non-scrambled channels by selecting the channel on the cable box. You cannot record scrambled channels that require a cable box. English - 17 0 01344A-VR350-XAC-ENG.indb 17 1344A-VR350-XAC-ENG.indb 17 2 2007-03-13 오후 5:06:58 007-03-13 오후 5:06:58
Summary of the content on the page No. 18
Connecting the Video Cable There are several ways to connect your DVD Recorder & VCR. Select one of the video connections on the following pages. You must use one of the following audio/video connections on this unit. ▌Connecting to Component Video Input Jacks (Y,PB,PR) Connect Component video cables (not supplied) between the COMPONENT OUT (Y,P ,P ) jacks on DVD B R Recorder & VCR and COMPONENT IN (Y,PB,PR) jacks on your TV. (P.SCAN Button) • You will enjoy high quality images. Component vid
Summary of the content on the page No. 19
Connections ▌ Connecting to an S-Video Input Jacks Connect an S-Video cable(not supplied) between the S-VIDEO OUT jack on DVD Recorder & VCR and S-VIDEO IN jack on your TV. • You will enjoy high quality images. S-Video separates ■ S-V ideo and Component video output are the picture element into black and white (Y) and color available only if your TV supports S-Video input or (C) signals to present clearer images than regular video Component video input, respectively. input mode. If S-Vid
Summary of the content on the page No. 20
▌ Connecting to a Video Input Jacks Connect a video(yellow) cable between the VIDEO(yellow) OUT jack on DVD Recorder & VCR and VIDEO(yellow) IN jack on the TV. • You will enjoy regular quality images. • Connect the audio cables(white and red) between the AUDIO OUT jacks on the DVD Recorder & VCR and AUDIO IN jacks on your TV(or AV amplifi er). (See pages 21~23) English - 20 01344A-VR350-XAC-ENG.indb 20 01344A-VR350-XAC-ENG.indb 20 2 2007-03-13 오후 5:07:29 007-03-13 오후 5:07:29 Connect
