Summary of the content on the page No. 1
SHR-3040
4 Channel DVR
User’s Manual
imagine the possibilities
Thanks you for purchasing this Samsung product.
To receive a more complete service, please
register your product at
www.samsungsecurity.com
02489A_SHR-3040_ENG.indb 1 2009-11-10 오후 2:12:48
Summary of the content on the page No. 2
overview Key Features Display ~ Real Time Display of Each Channel ~ Auto Sequence display of 4 channels ~ PIP (Picture in Picture) ~ Pause Mode ~ 2X ZOOM ~ Quick Switch between Live and Playback Screen ~ PTZ Camera supported r ecord ~ Up to 3 Levels of Quality and Frame Rates ~ Audio Recording ~ Scheduled Recording ~ Event Recording using External Sensors and Motion Detection ~ Emergency Recording Network ~ Remote Monitoring using Web Viewer ~ Supports DDNS Service Play ~ Search by the Data Size
Summary of the content on the page No. 3
Overview imPOrtaNt saFety iNstructiONs Read these operating instructions carefully before using the unit. Follow all the safety instructions listed below. Keep these operating instructions handy for future reference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. ! 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions
Summary of the content on the page No. 4
overview BeFOre start This user’s manual provides Information for using DVR such as brief introduction, part names, functions, connection to other equipment, menu setup, and the like. You have to keep in mind the following notices: ~ Samsung retains the copyright on this manual. ~ This manual cannot be copied without Samsung’s prior written approval. ~ We are not liable for any or all losses to the product incurred by your use of non-standard product or violation of instructions mentioned in
Summary of the content on the page No. 5
Overview what’s included Unpack the product package and put down the product on a flat floor or in an installation place. Check if all components of the package are included. SHR-3040 ! DVR Remote Control/Battery (AAAX2) Mouse Installation CD User’s Manual AC Adaptor/Power Cable English _ 02489A_SHR-3040_ENG.indb 5 2009-11-10 오후 2:12:51
Summary of the content on the page No. 6
overview cONteNts 2 Key Features overview 3 Important Safety Instructions 4 Before Start 6 Contents 2 8 Front Panel 9 Rear Panel 10 Remote Control at a Glance 11 Checking the Installation Environment tionallainst 12 Installing HDD 13 Connecting to a Different Device 14 Network Connection 11 14 USB Connection 15 Live live 18 Mode Switch 18 PIP Display 19 Zoom 15 19 Auto Sequence 19 Freeze 20 Record 20 PTZ 21 Search 22 Play 23 Event Monitoring 24 Event Monitoring on the Spot Monitor 25 Using th
Summary of the content on the page No. 7
Overview 51 What is Web Viewer? web viewer 51 Connecting to the Web Viewer 52 Web Viewer at a Glance 53 Client Setup 51 54 Remote Setup 56 Backup 56 Player 59 Remote Viewer 62 Search ! 63 Product Specification appendix 65 Appearance & Dimension 66 Troubleshooting (FAQ) 63 English _ 02489A_SHR-3040_ENG.indb 7 2009-11-10 오후 2:12:52
Summary of the content on the page No. 8
overview FrONt PaNel 1 Item Description USB Port Used to connect a USB memory device. Power Displays the status of the system power. LED HDD Blinks when a hard disk is accessed. ( Plays video backward. REC Starts or ends recording. ! ) Plays video forward. Play + Plays a recorded channel forward. # Stops playing a video. _ Plays a video backward. MODE Switches to a split mode. +/- Allows you to change the menu settings or control Zoom In/Out in PTZ mode. MENU Accesses the menu sc
Summary of the content on the page No. 9
Overview rear PaNel 1 ! Item Description AUDIO IN Audio signal input port. (RCA jack) AUDIO OUT Audio signal output port. (RCA jack) RS-485 Connector for an RS-485-based external device. (Pan/Tilt/Zoom) ALARM Output Alarm output port. ALARM Input Alarm input terminal. VGA Video output port to a VGA monitor. VIDEO IN (CH 1~4) BNC port for camera video input. (up to 4 cameras supported) VIDEO OUT BNC port for AV monitor output. PS/2 MOUSE PS/2 type mouse connection port. DC Input
Summary of the content on the page No. 10
overview remOte cONtrOl a t a GlaNce searcH The Search menu appears. PtZ menu The PTZ control menu appears. Opens the main menu, or moves to the previous stage. Number Use this pad to enter a number or display a single screen. FuNc rec The Launcher menu appears. Starts/stops recording. mODe Switches to a split mode. auDiO Direction/OK Turns on or off the sound. Used to move the cursor up/down or left/ right./Used to select and run a menu item. +/- cH +/- Used to change the menu settings or
Summary of the content on the page No. 11
iNstallatiON installation Please be noticed with the followings before you use the product. ~ Do not use the product outdoor. ~ Do not spill water or liquid in the connection part of the product. ~ Do not impose the system to excessive shock or force. ~ Do not pull out the power plug forcefully. ! ~ Do not disassemble the product on your own. ~ Do not exceed the rated input/output range. ~ Use a certifi ed power cord only. ~ For the product with an input ground, use a grounded power plug. cHec
Summary of the content on the page No. 12
installation iNstalliNG HDD You can install a separate HDD if your recorder has no built-in HDD. MAIN BOARD HDD SATA 1. Loosen the screws in the left and right sides and remove the cover. . Use the SATA data cable to connect the main board with the HDD, and connect the HDD power cable. . Attach the HDD cushion to the internal bottom of the DVR, place the HDD over it, and use the provided screws to fix the HDD. ` If the HDD is not installed properly, it may not work at all. So it is necessary
Summary of the content on the page No. 13
iNstallatiON cONNectiNG tO a DiFFereNt Device connecting to video, audio, and monitor CAMERA ! MONITOR VGA MONITOR MOUSE MIC SPEAKER SPOT MONITOR connecting to rs-485, alarm connecting rs-485 device Connection port used to control an external device such as the PTZ and speed dome camera. Connect the external device to the RS-485 port (PIN 1:-, 2:+) in the rear [FuNcti ON] panel. ` Check if the RS-485 device is compliant with the DVR. M ` Please take care about the polarity (+/-) of RS-485
Summary of the content on the page No. 14
installation NetwOrK cONNectiON You can use the Ethernet connector to connect to the network. Connecting to the network consisting of multiple computers enables you to perform various functions including remote monitoring, remote search, and remote control. Cable/ADSL/VDSL IP Router Internet or DDNS Server Direct LAN (Dynamic/Static IP) (websamsung.net) SHR-3040 Local PC #1 CAMERA Local PC #N Remote User PC #1 Remote User PC #N SHR-3040 Data Line : Video Line : usB cONNectiON The DVR has one
Summary of the content on the page No. 15
live live live Getting started ! 1. Connect the power cable of the DVR to the wall outlet. 2009/05/01 2009/05/01 00:00:01 00:00:01 14D 14D When it turns on, the system gets started automatically. login To access a DVR or restricted menu, you should have logged in to the DVR. 1. In Live Screen, right-click any area of the screen. 2009/05/01 2009/05/01 00:00:01 00:00:01 14D 14D The Control icon appears in the bottom. . Click the menu icon [ ]. ` You can also see the login dialog by pressing th
Summary of the content on the page No. 16
live live screen confi guration You can check the status or operation of the DVR with the icons on the live screen. 1 2009/05/01 2009/05/01 00:00:01 00:00:01 14D 14D 10 Item Description Current Date, Time Displays the current time and date. Displays the audio output status. Live Screen Status Displays the status of PTZ, PIP, ZOOM, SEQ, and FRZ, respectively. Network Displays the network connection status in network connection or Connection disconnection. Status Record Display
Summary of the content on the page No. 17
live view the launcher menu You can use the Launcher menu appearing on the bottom of the live screen to access it. 1. In Live mode, right-click any area or press the [FuNc ] 2009/05/01 2009/05/01 00:00:01 00:00:01 14D 14D button on the remote control. The Launcher menu appears in the bottom. . Move the cursor over the bottom, and click a desired item in the Launcher menu to access it. ! Menu Description Mode Switch Switches to a single or split mode for each channel. Record Performs the man
Summary of the content on the page No. 18
CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH2 CH5 CH6 CH7 CH8 CH1 CH2 CH3 CH1 CH4 CH5 CH6 CH9 CH10 CH11 CH12 CH13 CH14 CH15 CH16 CH3 CH4 CH4 CH5 CH6 CH7 CH8 CH9 CH2 CH2 CH3 CH4 CH5 CH6 CH3 CH7 CH1 CH1 CH8 CH9 CH4 CH2 CH1 CH1 CH5 CH6 CH7 CH8 CH10 CH11 CH12 CH13 CH1 CH2 CH3 CH1 CH2 CH4 CH5 CH6 CH1 CH7 CH8 CH9 CH3 CH4 CH10 CH11 CH12 live CH13 CH14 CH15 mODe switcH CH16 You can use the channel buttons on the remote control or the front panel to switch to a single or 4-split mode for each channel. 1. Press the ch
Summary of the content on the page No. 19
live ZOOm This is available in Live mode where the screen of the selected channel will be enlarged by 2x. 1. Press and hold the [ZOOm] button on the remote control or the front panel, or click < > in the Launcher menu. The selected channel will be enlarged by 2x, while CH 1 will be enlarged to fit the screen in 4-split mode. ` In an enlarged screen, move the cursor to scroll through the screen. M ! CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH2 CH1 CH2 CH3 CH4 CH1 CH2 CH3 CH2 CH1 CH2 CH3 C
Summary of the content on the page No. 20
live recOrD You can make recording manually in Live mode. Other than in manual mode, recording will proceed as set in the Schedule menu. 1. Press the [rec ] button on the remote control or the front panel, 2009/05/01 2009/05/01 00:00:01 00:00:01 14D 14D or click < > in the Launcher menu. Recording will start while the button switches to Stop mode. . Press the [rec ] button again, or click < >. Recording will be stopped. ` You can set detailed options in “MAIN MENU > RECORD”. M ` If the HDD i
