Summary of the content on the page No. 1
HVR-04E
Installation Guide
v 1.0
Summary of the content on the page No. 2
FCC Compliance Statement Caution: Any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This e
Summary of the content on the page No. 3
Important Notice 1. Do not place heavy objects on the top of the HVR-04E. 2. HVR-04E is for indoor use. It is not weatherproof. Use HVR-04E with referring to its environmental specifications (Temperature & Humidity). To clean the HVR-04E, gently wipe the outside with a clean dry cloth. 3. Be sure to use a DC adapter that is provided by Hunt Electronic USA, Inc. Connecting HVR-04E directly to an AC current will cause electric damages to HVR-04E. 4. Be careful not to drop the
Summary of the content on the page No. 4
HVR-04E TABLE OF CONTENTS OVERVIEW ................................................................................................................................ 7 1. What is HVR-04E?.............................................................................................................. 7 2. Supplied Accessories........................................................................................................ 8 3. Description & Function ........................................
Summary of the content on the page No. 5
TABLE OF CONTENTS HVR-04E 8.2.2. Daylight Saving ................................................................................................... 23 8.2.3. Time Format ........................................................................................................ 24 8.2.4. Date..................................................................................................................... 24 8.2.5. Time .......................................................................
Summary of the content on the page No. 6
HVR-04E TABLE OF CONTENTS 14.3. Available HDD......................................................................................................... 37 14.4. Registering & Formatting HDD................................................................................ 38 15. Network Monitoring & Managing ................................................................................ 39 15.1. Connecting Ethernet ..............................................................................
Summary of the content on the page No. 7
OVERVIEW HVR-04E OVERVIEW 1. What is HVR-04E? The HVR-04E is a 4-Analog, 12-IP channel network digital video recorder. The HVR-04E can record and display 4 analog video channels and 12 IP video channels simultaneously. Video, Audio, and Text Event- Logs are digitized and stored on two internal hard-drives. Key features □ Expandable up to 16 channels (4 analog video channels + 12 IP video channels) □ 1 channel audio recording & playback □ Total 120 ips recording speed (Analogue vi
Summary of the content on the page No. 8
HVR-04E OVERVIEW 2. Supplied Accessories Unpack and check all the items as below. 1. HVR-04E (1) 2. DC Power Supply (1) (110V~220V) 3. AC Power Cord (1) 4. CD-ROM (Including DVR Manager) (1) 5. Remote Controller (1) 6. Guide (2) 7. Plug Bracket (1) 8. HDD Fixing Screw (8) 2003.05.21 (v 1.0) 8 Hunt Electronic USA, Inc.
Summary of the content on the page No. 9
OVERVIEW HVR-04E 3. Description & Function HVR-04E Front (1) LED (2) IEEE1394 connecter (3) Remote controller receiver (4) USB connecter (5) Function buttons (6) Bracket fixing hole for rack mount
Summary of the content on the page No. 10
HVR-04E OVERVIEW HVR-04E Rear (7) Power switch (8) Ethernet connector (9) BNC connector for Video input (10) Audio input / output connector (11) RS232 connecter (9Pin D-Sub) (12) Terminal block for RS232 & 422/485 (13) Terminal block for Sensor input (14) Terminal block for Relay output (15) Video output for MONITOR or VCR (16) Video input type/impedance select & remote controller switch (17) IEEE1394 connecter (18) USB connecter (19) Power connector (DC12V) (20) GND 20
Summary of the content on the page No. 11
INSTALLATION AND CONNECTION HVR-04E INSTALLATION AND CONNECTION 4. Connecting & Running HVR-04E 4.1. Connecting camera (1) Connect CCTV camera to HVR-04E with BNC cable as shown below. (2) Set video type (NTSC/PAL) by rear panel’s switch. The video type for all channels should be either NTSC or PAL. NTSC is the standard used in North America. (3) Set the impedance control switch for each channel as needed. It may be necessary to configure impeda
Summary of the content on the page No. 12
HVR-04E INSTALLATION AND CONNECTION 4.2. Connecting Monitor (1) Connect CCTV monitor to HVR-04E with BNC cable as shown below. HVR-04E has two video output ports ; for Monitor and VCR. The output signals from the two ports are same and either port may be used. 4.3. Connecting Audio (1) Connect audio signal to HVR-04E. 2003.05.21 (v 1.0) 12 Hunt Electronic USA, Inc.
Summary of the content on the page No. 13
INSTALLATION AND CONNECTION HVR-04E
Summary of the content on the page No. 14
HVR-04E INSTALLATION AND CONNECTION 4.4. Supplying Power (1) Connect power cable to HVR-04E. (2) Turn on the power switch located on the HVR-04E rear panel. Use the plug bracket to secure the power cable if needed. To connect EARTH, refer to the following picture. 2003.05.21 (v 1.0) 14 Hunt Electronic USA, Inc.
Summary of the content on the page No. 15
INSTALLATION AND CONNECTION HVR-04E 5. Running OSD menu 5.1. Using menu Press the [MENU] button to open the OSD Configuration Menu. (1) Main Menu (2) Sub-menu (3) Setting Page (4) Help message (1) Main Menu Tabs: The selected tab is shown in blue and the related sub-menus will be shown below the tab. To move to the previous/next Main Menu Tab, use the [◄◄ / ►►] arrow buttons. To move to a sub-menu, press the [ENTER] or [▼] buttons. (2) Sub-menu: The selected sub-menu is sho
Summary of the content on the page No. 16
HVR-04E INSTALLATION AND CONNECTION 5.2. Dialogue Box to Edit a Word There are two methods to set word. (1) Using number button Enter the related numbers in order of horizontal/vertical. (For example, in order to select “C”, press [3] and [2] buttons.) (2) Using arrow button Select a value using the [ ◄◄ / ►►] or [▲/▼] buttons. The intersection of the horizontal and vertical bar is selected value. Press the [ ►] button to confirm the selected value. (3) Function word The fo
Summary of the content on the page No. 17
INSTALLATION AND CONNECTION HVR-04E 6. Setting remote controller 6.1. Setting remote control DIP switch Set the remote control DIP switch to “ON.” 6.2. Set ID of HVR-04E When controlling several HVR-04Es with one remote controller, set Remote Control ID as follows. (1) Press [MENU] button. (2) Select “System” with using [►►] button and press the [ENETR] or [▼] button.
Summary of the content on the page No. 18
HVR-04E INSTALLATION AND CONNECTION (3) Select “Miscellaneous” from the sub-menu list using the [▼] button and press the [ENETR] button. (4) Select “Remote Control ID,” and press the [ENETR] button. (5) Select a value using the [◄◄ / ►►] buttons and press the [EXIT] button. (6) Press the [EXIT] button to exit the Settings Page and return to Monitor mode. Remote Control ID Up to 16 HVR-04Es can be controlled with a single remote controller. 6.3. Selecting HVR-04E
Summary of the content on the page No. 19
INSTALLATION AND CONNECTION HVR-04E 6.4. Operable range of remote controller 6.5. Loading the batteries into remote controller Remote controller requires two AAA-type batteries. 2. Taking care that the poles(+/-) 1. Remove the battery cover. 3. Replace the battery cover. are correctly positioned Batteries are not included as a packing accessory.
Summary of the content on the page No. 20
HVR-04E INSTALLATION AND CONNECTION 7. HVR-04E Configuration 7.1. Basic Configuration 7.2. Advanced Configuration 2003.05.21 (v 1.0) 20 Hunt Electronic USA, Inc.
