Summary of the content on the page No. 1
ELX16-240
Installation Guide
(v 1.0)
Summary of the content on the page No. 2
FCC Compliance Statement Caution : Any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Thes e limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a c
Summary of the content on the page No. 3
Important Notice 1. Do not place heavy objects on the top of the ELX16-240. 2. ELX16-240 is for indoor use. It is not weatherproof. Use ELX16-240 with referring to its environmental specifications (Temp erature & Humidity). To clean the ELX16-240, gently wipe the outside with a clean dry cloth. 3. ELX16-240 uses AC power of 110V ~ 220V. Be cautious not to cause electric damages to ELX16-240. 4. Be careful not to drop the ELX16-240. Physical shocks may harm the product. In additio
Summary of the content on the page No. 4
ELX16-240 Contents Contents OVERVIEW ..................................................................................................................................................................7 1. What is ELX16-240?....................................................................................................................................7 2. Supplied Accessories ....................................................................................................................
Summary of the content on the page No. 5
Contents ELX16-240 8.2.7. Apply Date/Time .......................................................................................................................22 8.3. Setting Recording Condition .........................................................................................................23 8.3.1. Configuration Status................................................................................................................23 8.3.2. Channel Status.............................
Summary of the content on the page No. 6
ELX16-240 Contents 11. Network Monitoring & Managing......................................................................................................42 11.1. Connecting Ethernet.................................................................................................................... 42 11.2. Configuring ELX16-240’s Network Information ..................................................................43 12. Using DVR manager.......................................................
Summary of the content on the page No. 7
OVERVIEW ELX16-240 OVERVIEW 1. What is ELX16-240? The ELX16-240 is an 16-analog channels network digital video recorder. Video, Audio, and Text Event -Logs are digitized and stored on two internal hard-drives. q 16 analog video channels q 1 channel audio recording & playback q Max. 240 / 200 ips (NTSC / PAL) recording speed q Realtime (30 / 25 ips for each channel) monitoring q Built-in software multiplexer for all 16 live monitoring channels (1 / 4 / 9 / 13 / 16 Ch Mode on CC
Summary of the content on the page No. 8
ELX16-240 OVERVIEW 2. Supplied Accessories Unpack and check all the items as below. 1. ELX16-240 (1EA) 2. AC Power Cord (1EA) 3. CD-ROM (Including DVR manager) (1EA) 4. Remote Controller (1EA) 5. Guide (2EA) 6. HDD Fixing KIT (1SET) 7. 19” RACK FIXING KIT (1SET) 8. HDD EARTH CABLE (1EA) Error! Unknown document property name. 8 Rugged CCTV (v 1.0)
Summary of the content on the page No. 9
OVERVIEW ELX16-240 9. HDD DATA CABLE (1EA) 3. Description & Function ELX16-240 Front (1) Power switch (2) Function buttons (3) LED (4) I/O Port cover (5) USB connector (6) IEEE1394 connector (7) Remote controller receiver Error! Unknown document property name. Rugged CCTV 9 (v 1.0)
Summary of the content on the page No. 10
ELX16-240 OVERVIEW ELX16-240 Rear (8) BNC connector for video input (9) AC power connector (10) BNC connector for video output (11) BNC connector for monitor A output (12) BNC connector for monitor B output (13) Terminal block for sensor, relay, and serial input/output (14) IEEE1394 connecter (15) Terminal block for RS232 & 422/485 (16) Ethernet connector (17) GND (18) RS232 connecter (9Pin D-Sub) (19) Audio input / output connector (20) S-VHS connector Error! Unknown doc
Summary of the content on the page No. 11
INSTALLATION AND CONNECTION ELX16-240 INSTALLATION AND CONNECTION 4. Connecting & Running 4.1. Connecting camera (1) Connect CCTV camera to ELX16-240 with BNC cable as shown below. 1. The video type for all channels should be either NTSC or PAL 2. ELX16-240 sets video signal’s impedance ( 75Ù) automatically. Impedance is set as 75Ù basically. If connecting a device to video output, impedance will be “Hi-z” status. 3. Video type (NTSC/PAL) should be changed after di
Summary of the content on the page No. 12
ELX16-240 INSTALLATION AND CONNECTION 4.2. Connecting Monitor (1) Connect CCTV monitor to ELX16-240 with BNC cable as shown below. ELX16-240 has two monitor output ports ; for A(Normal) and B(Spot). When connecting only one monitor, use monitor A. 4.3. Connecting Audio (1) Connect audio signal to ELX16-240 with using RCA cable. Error! Unknown document property name. 12 Rugged CCTV (v 1.0)
Summary of the content on the page No. 13
INSTALLATION AND CONNECTION ELX16-240 4.4. Supplying Power (1) Connect power cable. 1. When supplying power, ELX16-240 starts booting automatically. 2. When pressing the power switch during 5 seconds, a dialogue for entering admin password occurs. In order to cut off power, key in the password. 3. For supplying power again, push the power switch. Error! Unknown document property name. Rugged CCTV 13 (v 1.0)
Summary of the content on the page No. 14
ELX16-240 INSTALLATION AND CONNECTION 5. Running OSD menu 5.1. Using menu Press the [MENU] button to open the OSD Configuration Menu. (1) Main Menu (2) Sub-menu (3) Setting Page (1) Main Menu Tabs: The select ed tab is shown in blue and the related sub-menus will be shown below the tab. To move to the previous/next Main Menu Tab, use the [ / ] arrow buttons. To move to a sub-menu, press the [ENTER] or [ ] buttons. (2) Sub-menu: The select ed sub -menu is shown in blue an
Summary of the content on the page No. 15
INSTALLATION AND CONNECTION ELX16-240 5.2. Dialogue Box to Edit a Word There are two methods to set word. (1) Using number button “ ” Enter the related numbers in order of horizontal/vertical . (For example, in order to select C , press [3] and [2] buttons.) (2) Using arrow button Select a value using the [ / ] or [ / ] buttons. The intersection of the horizontal and vertical bar is select ed value. Press the [ ] button to confirm the selected value. (3) Function wo
Summary of the content on the page No. 16
ELX16-240 INSTALLATION AND CONNECTION 6. Setting remote controller 6.1. Setting ID of ELX16-240 When controlling several DVRs with one remote controller, set Remote Control ID as follows. (1) Press the [MENU] button. (2) Select “System” with using [ ] button and press the [ENETR] or [ ] button. (3) Select “Miscellaneous” from the sub-menu list using the [ ] button and press the [ENETR] button. (4) Select “Remote Control ID,” and press the [ENETR] button. (5) Select a value u
Summary of the content on the page No. 17
INSTALLATION AND CONNECTION ELX16-240 6.2. Selecting ELX16-240 If several DVRs are set with unique ID numbers, they can be controlled with one remote controller. To select a specific (ELX16-240), keep pressing the ID button of remote controller until a buzzer sounds during 2 seconds. Because remote controller ID is sixteen, DVR will correspond until pressing ID button sixteen times. 6.3. Operable range of remote controller 6.4. Loading the batteries into remote controll
Summary of the content on the page No. 18
ELX16-240 INSTALLATION AND CONNECTION 7. ELX16-240 Configuration 7.1. Basic Configuration 7.2. Advanced Configuration Error! Unknown document property name. 18 Rugged CCTV (v 1.0)
Summary of the content on the page No. 19
INSTALLATION AND CONNECTION ELX16-240 7.3. External Storage & Backup Configuration 7.4. Internet/Intranet Configuration Error! Unknown document property name. Rugged CCTV 19 (v 1.0)
Summary of the content on the page No. 20
ELX16-240 INSTALLATION AND CONNECTION 8. ELX16-240 Basic Setting 8.1. Viewing Image After initial start-up, images are displayed in multi-split screen according to the connected channels. The following example is when 4 channels are connected. If user password is set, a prompt for entering the password will appear. Error! Unknown document property name. 20 Rugged CCTV (v 1.0)
