Summary of the content on the page No. 1
Alarm
4CH STANDALONE DVR
USER MANUAL
2008 JAN. Ver 1.1
1
4
USB
4 CHANNEL
Summary of the content on the page No. 2
Summary of the content on the page No. 3
4CH STANDALONE DVR HDD SUPPORT LIST Warning： Should you wish to install a new hard drive in this unit, a list of tested hard drives shown to be compatible can be found below. Brand Capacity IDE- Samsung 80GB/ 160GB IDE- Seagate 80GB/ 160GB/ 320GB/ 400GB IDE- Maxtor 80GB/ 160GB/ 320GB/ 400GB SATA- Maxtor 160GB/ 250GB/ 320GB SATA- Seagate 160GB/ 250GB/ 320GB/ 500GB/ 750GB SATA- HITACHI 160GB/ 250GB/ 320GB/ 500GB/ 750GB
Summary of the content on the page No. 4
4CH STANDALONE DVR CONTENT 2 1、FEATURE 3 2、SPECIFICATIONS 4 3、INSTALLATION 5 4、FRONT PANEL 6 5、OPERATING MANUAL 8 6、VIEW CONTROL 7、PLAYBACK CONTROL 9 8、RECORD CONTROL 9 9、4 CHANNEL RECORDING HOURS 10 10、DVR Viewer User Guide 11 18 11、SATA TO PATA CONVERT BOARD(Option) - 1 -
Summary of the content on the page No. 5
4CH STANDALONE DVR 1、FEATURE 1、Definitely Standalone. 2、Real Time Refresh Rate. 3、Display While Recording. 4、Frame Recording & Quad Recording. 5、Compatible of NTSC/PAL format. 6、Advanced MJPEG. 7、Manual / Motion / Programmed 8、Systems records automatically while alarming. 9、Search by Time / Date. 10、Watch dog feature. 11、HDD Volume Indicator. 12、Can use USB to link PC, Player can search Time to Play、 saving and take photos functions. 13、Internal motion detect feature. 14、Remote Control.
Summary of the content on the page No. 6
4CH STANDALONE DVR 2、SPECIFICATIONS OPERATION SYSTEM Embedded RTOS Video Input NTSC/PAL VGA Output D-SUB 15P VGA Video Input Channel 4CH Composite Video Output Channel 1CH Composite Display Frame NTSC 120 fps (4x30 fps) PAL 100 fps (4x25 fps) Recording Frame NTSC Max. 30 fps Rate(QUAD) PAL Max. 25 fps Recording Frame NTSC Max. 7.5fps(30 fps/4) Rate(EACH) PAL Max. 6.25fps(25 fps/4) Recording
Summary of the content on the page No. 7
4CH STANDALONE DVR 3、INSTALLATION REAR PANEL (4) REAR PANEL A AUDIO IN VIDEO IN VIDEO OUT CH1 CH2 CH3 CH4 XGA DC12V OUT (1) (2) (3) (5) (6) REAR PANEL B AUDIO IN VIDEO IN VIDEO OUT CH1 CH2 CH3 CH4 DC12V OUT (1) XGA Output(Only REAR PANEL A) (2) Video Output : Corresponding to Video Input. (3) Video IN : Cameras to Video Input. (4) Audio Input. (5) Audio Output. (6) Power Input : Please use the power supply attached Adaptor : DC-12V / 4A - 4 -
Summary of the content on the page No. 8
4CH STANDALONE DVR 4、FRONT PANEL (1) ( 2 ) ( 9 ) (10) ( 4 ) ( 7 ) ( 5 ) ( 8 ) ( 6 ) ( 3 ) (11) (12) (1) USB PORT (2) Record Indicator (3) HDD Indicator (4) Move Up / Camera 1 Display (5) Move Left / Camera 2 Display (6) Move Down / Camera 3 Display (7) Move Right / Camera 4 Display / Select (8) Menu / Show Percentage of the hard Drive recorded (9) Play / Pause (10) Record / Stop (11) Fast Reverse / Mute (12) Fast Forward / Sequence Switc
Summary of the content on the page No. 9
4CH STANDALONE DVR 5、OPERATING MANUAL (MAIN MENU) MAIN MENU SYSTEM SETUP CAMERA SETUP RECORD SETUP RECORD SCHEDULE MOTION SETUP HARD DRIVE SETUP (Only REAR PANEL A) XGA RESOLUTION : 1024 X 768 SYSTEM RESTORE ( ) : SELECT ( ) : SET ( ) : EXIT XGA RESOLUTION : 640X480, 800X600, 1024X768 (default setting),1280X1024.(Only REAR PANEL A) Press to select items, use to enter. Press to exit SYSTEM SETUP SYSTEM SETUP BUZZER
Summary of the content on the page No. 10
4CH STANDALONE DVR is:"1" is:"2" is:"3" is:"4” TIME SETUP Select this item to set up current time. TIME SET 2004/12/17 18:00:30 ( ):SELECT ( ):SET ( ):EXIT Press to select items, use to enter. Press to exit CAMERA SETUP CAMERA SETUP CAMERA : CH1 LIVE ON/OFF : ON RECORD ON/OFF : ON BRIGHT SETUP : 5 CONTRAST SETUP : 5
Summary of the content on the page No. 11
4CH STANDALONE DVR RECORD SCHEDULE RECORD SCHEDULE TTTTTTTTTTTT TTTTTTTTTTTT : : : : : : : : 0 3 6 9 12 15 18 21 Press to select items, use to enter. Press to exit (1)Range: 0-24 hrs. (2)Set ”T” for continuous recording. (3)Set “M” for motion recording. (4)Set up ”-” to disable the recording. MOTION SETUP MOTION SETUP MENU CHANNEL-1 SENSITIVITY 0 (OFF) CH
Summary of the content on the page No. 12
4CH STANDALONE DVR 7、PLAYBACK CONTROL (1)Press , and the system will play the latest event which you haven't seen before. (2)Press , and the system will enter the PLAYBACK EVENTS SEARCH MODE. (3)Each period is as four hour. SEARCH TIME HARD DRIVE : MASTER Select Start Date/ 04/04/01 02:47:56 - 04/04/01 02:47:56 Time to End Date/ Time 01 TIME 2004/12/10 02:47:50 02 TIME 2004/12/10 02:47:50 03 TIME 2004/12/10 02:47:50 Press to select items, use to enter. Press
Summary of the content on the page No. 13
4CH STANDALONE DVR 9、4CH RECORDING HOURS ON 80GB HARD DRIVE *Thereinafter a rough estimate a table for reference only, recording data quantity can follow an image a variation a rate somewhat different. Recording Results in NTSC Format Video Video 30 fps 15 fps 7 fps 1 fps Display Signal Quality Format High 36Hours 72 Hours 144 Hours 1,080 Hours QUAD Nor mal 48 Hours 96 Hours 192 Hours 1,440 Hours M
Summary of the content on the page No. 14
4CH STANDALONE DVR 10、DVR PC Viewer User Guide Introduction This document is the Operation Manual for the 4 CH Stand Alone DVR PCViewer. The application will show you stream image stored in the Storage Device (HDD, CF card, USB Memory Stick, etc.), which was previously formatted and recorded by the DVR. If any DVR-formatted Storage Device is connected to your PC, the application will automatically detect the Storage Device and show the recorded stream. You can also save the current screen t
Summary of the content on the page No. 15
4CH STANDALONE DVR Execution Just double click the icon of PC Viewer. The application will try to detect physical storage devices installed at your PC and search for DVR storage device(s) among them. If there is DVR Storage Device, the application will automatically start playing. However, If the application fails to detect DVR Storage Device, which means that there is no DVR Storage Device installed to your system, it will show following error message and set the default working mode to MYS Pla
Summary of the content on the page No. 16
4CH STANDALONE DVR (1) (12) (11) (2) (3) (4) (5) (6) (7) (8) (9) (10) (1) Screen (7) PC Viewer Playback Control (2) Positioning Slider Bar (8) Capture Stream Button [MYS] (3) (9) Screen Capture Button [JPEG] MYS Player Button (4) DVR Storage Device Change Button (10) Audio Control (5) DVR Storage Device Information (11) Viewer Playback Mode (6) (12) Stream Time Display Channel Selection Fig.2. DVR Storage Device PC Viewer User Interface B. Functions i. MYS Player Button If you want to see MYS fi
Summary of the content on the page No. 17
4CH STANDALONE DVR iii. DVR Storage Device Information Button If you want to know how big is the DVR storage device is, or how much stream data is stored in the device, press this button. Fig.4 shows the DVR storage device information window. Fig.4. DVR Storage Device Information Window iv. Channel Selection Buttons According to the record channel setting of the stream, each channel buttons will be enabled. Select any channel you want to see enlarged. Fig.5. Channel Selection Buttons Press butt
Summary of the content on the page No. 18
4CH STANDALONE DVR vi. Capture Stream Button If you want to capture stream, follow the stream capture procedure listed below: * Using Positioning Slider Bar find the stream position you want. * Make sure that the playback is in PAUSE mode, and the Capture Stream Button is enabled. * Press the button, then the application will start capturing. During capturing, Capturing Indicator Window will be popped up. Fig.7. Capturing Indicator Window * To stop capturing, press Stop Capturing button on th
Summary of the content on the page No. 19
4CH STANDALONE DVR (1) (2) (3) (10) (6) (9) (4) (5) (7) (8) Screen MYS file information (1) (6) MYS File Select Dialog MYS File Playback Control (2) (7) Positioning Slider Bar Screen Capture Button [JPEG] (3) (8) PC Viewer Button Audio Control (4) (9) (5) File Open Button Playback Status (10) Fig.9. MYS File Player User Interface B. Functions i. PC Viewer Button When you want to back to PC Viewer function, press this button. ii. File Open Button Press this button to select MYS file. iii.
Summary of the content on the page No. 20
4CH STANDALONE DVR * Press button (or [<-] Key) to start fast reverse playback. By pressing this button again, you can adjust the speed. The maximum speed is 64 times faster than reverse playback. * Press button (or [<-] Key) to start reverse playback. * Press button (or [Space Bar]) to pause playback. * Press button (or [->] Key) to start normal playback. * Press button (or [->] Key) to start fast forward playback. By pressing this button several times,
