Q-See QT446 user manual

User manual for the device Q-See QT446

Device: Q-See QT446
Category: DVR
Manufacturer: Q-See
Size: 5.06 MB
Added : 3/26/2013
Number of pages: 27
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Q-See QT446. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Q-See QT446.

For your convenience

If looking through the Q-See QT446 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Q-See QT446 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Q-See QT446 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Q-See QT446 User manual - Online PDF
Advertisement
« Page 1 of 27 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Q-See QT446 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Q-See QT446. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

User Manual
MODEL QT454
QT428
QT426
QT446
QT4 Series
H.264 NETWORK DVR
1

Summary of the content on the page No. 2

About this Manual This manual is written for the QT4 family of DVRs. Not all features and capabilities are shared across all models so you may see features described which are not applicable or available on Thank You for Choosing a Q-See Product! your machine. In addition you may see screen images that do not exactly match those on your All of our products are backed by a conditional service warranty covering all hardware for 12 display. months from the date of purchase. Additionally, our

Summary of the content on the page No. 3

6. DVR MANAGEMENT 39 TABLE OF CONTENTS 6.1 Information 39 Event Information 40 1. FOR YOUR SAFETY 7 Log Information 40 Network Information 40 2. INTRODUCTION 8 Online User Information 41 Main Features 8 6.2 Manual Alarm 41 3. BASIC FUNCTIONS 10 6.3 Disk Management 41 3.1 Power On/Off 10 6.4 Upgrade 42 Power On 10 Power Off 10 6.5 Logoff 42 3.2 The Control Bar 11 6.6 Shut Down 42 3.3 Live Viewing and Recording 12 7. HARD DISK DRIVE 43 3.4 Live Playback 13 7.1 Installation/Removal 43 7.2 Calculati

Summary of the content on the page No. 4

CHAPTER 1 FOR YOUR SAFETY To prevent damage to your Q-See product or injury to yourself or to others, read and understand the following safety precautions in their entirety before installing or using this equipment. Keep these safety instructions where all those who use the product will read them. WARNING! ELECTRIC SHOCK RISK! n Check the unit and any accessories included in the package immediately after opening. If items are missing or damaged, repackage and return to the point of purchase

Summary of the content on the page No. 5

ALARM CHAPTER 2 INTRODUCTION 1 channel alarm output and up to 16-channel (depending on model ) alarm input available This DVR uses high-performance video processing chips and an embedded Linux operating Supports scheduling for motion detection and sensor alarm system for quality image recording and ease of use. It utilizes numerous advanced technologies including the industry-standard H.264 codec to deliver high-quality, smooth Supports pre-recording and post recording videos and du

Summary of the content on the page No. 6

CHAPTER 4 MAIN MENU SETUP 3.2 THE CONTROL BAR CHAPTER 3 BASIC FUNCTIONS When a user is logged in, pressing the ESC button on the DVR or right-clicking on the screen with the mouse will display the CONTROL BAR on the bottom of the screen. 3.1 POWER ON/OFF Move Before turning on the DVR, ensure that all connections are good. Screen Display Dwell Zoom PTZ Record Control Bar Mode Color Volume Snapshot Playback Menu POWER ON Connect the power supply and the DVR will power up. The blue LED power ind

Summary of the content on the page No. 7

CHAPTER 4 MAIN MENU SETUP 3.3 LIVE VIEWING AND RECORDING 3.4 LIVE PLAYBACK The normal mode of the DVR is to display the live feed from the cameras. Configuring which Pushing the playback buttons on the DVR or remote will enable you to play back what has channels will be displayed, naming the cameras and other display settings will be covered in been recorded. A toolbar will appear below the display allowing control via mouse as well. SECTION 4.3. In addition to the camera images, the DVR wi

Summary of the content on the page No. 8

CHAPTER 4 MAIN MENU SETUP MAIN MENU CHAPTER 4 MAIN MENU SETUP Selecting the MENU icon on the left of the CONTROL BAR or pressing the MENU button on the DVR and remote control open the MAIN MENU. 4.1 BASIC CONFIGURATION LOGIN Before configuring the system, a user account needs to be created and a user must be logged in. The DVR can be configured to allow multiple users, each with their own level of access and authority. If not logged in, only the multi-screen display can be changed. Clicking

Summary of the content on the page No. 9

CHAPTER 4 MAIN MENU SETUP VGA Resolution: Chose the configuration that best fits your monitor. Options are: 4.2 LIVE CONFIGURATION VGA800*600, VGA1204*768, VGA1280x1024 and CVBS. NOTE: VGA is for VGA Live configuration includes four submenus: Live, Main Monitor, Spot and Mask. monitors while CVBS is for TV monitors connected using a BNC/RCA adaptor. Live Tab Switching between VGA and CVBS will change the menu output mode. Please be Use this menu to set camera names and adjust picture color

Summary of the content on the page No. 10

CHAPTER 4 MAIN MENU SETUP Spot Tab 4.3 RECORD CONFIGURATION This allows select feeds to be viewed on a separate monitor that is connected to the DVR but Configure the recording settings for your cameras. There are five sets of options; Enable, may be in another room, for example. There will be no menu access on this auxiliary display. Record Bitrate, Time, Stamp and Recycle Record. Only one channel can be displayed at a Enable Tab time on this monitor. You can choose which Select some or all

Summary of the content on the page No. 11

CHAPTER 4 MAIN MENU SETUP Time Tab 4.4 SCHEDULE CONFIGURATION You can set the length of time the DVRs record an event before and after a motion detection Configure your camera to record at specific times based on time of day, motion detection or or alarm is triggered as well as how long an individual record is preserved. other sensor input. There are three tabs; Schedule, Motion and Sensor Pre-alarm record time: This sets the length Schedule Tab of time showing events prior to a motion detec

Summary of the content on the page No. 12

CHAPTER 4 MAIN MENU SETUP To Record allows you to determine which cameras will begin recording. Cameras can 4.5 ALARM CONFIGURATION be set to record individually, in blocks, or all cameras can be activated. Alarm configuration allows the DVR to begin recording based on input from other remote sensors such as infrared motion detectors or contact alarms which are connected to it. To PTZ activates preset, cruise or track functions on selected Pan-Tilt-Zoom cameras. Depending on your model of

Summary of the content on the page No. 13

CHAPTER 4 MAIN MENU SETUP Click on the icon showing a silhouette of a ALARM OUT person and an illustration of a walking figure Set how the alarms are handled and transmitted in this window. This controls any device will appear on the screen. Test your settings attached to the ALARM OUT port on the back of the DVR. There are three tabs; Alarm Out, by dragging the figure across the blue grid to Schedule and Buzzer. see if the sensitivity value and motion area are suitable to current condit

Summary of the content on the page No. 14

CHAPTER 4 MAIN MENU SETUP Definitions and descriptions of network configuration: 4.6 NETWORK CONFIGURATION The Network Configuration window is used to control how your DVR works in a networked Parameter Definition environment. This section offers a brief overview of how to set up your DVR so that it can be HTTP Port The network port number for accessing the DVR via Internet Explorer. The default remotely monitored from another computer on your network, over the Internet or from mobile port

Summary of the content on the page No. 15

CHAPTER 4 MAIN MENU SETUP Email Tab Other Settings This tab allows you to set how your DVR will send out e-mail alerts. You will be able to send Commercial ISPs provide their customers with dynamic addresses (IP numbers). These e-mail alerts to three addresses. numbers can change from time to time depending upon your service provider. Doing so can cause you to lose the ability to remotely access your DVR from your mobile phone or other NOTE! Depending upon your settings, the system can gener

Summary of the content on the page No. 16

CHAPTER 4 MAIN MENU SETUP 4.7 USER MANAGEMENT 4.8 PAN-TILT-ZOOM (PTZ) CONFIGURATION You can set up accounts for each individual user and grant them control of select parts of If you are connecting optional Pan-Tilt-Zoom cameras, the controls are set from this window in the surveillance system. An administrator account is already created on the DVR. Additional the Serial Port and Advanced tabs. accounts can be created for users but only one administrator account is allowed. Serial Port Tab You

Summary of the content on the page No. 17

CHAPTER 4 MAIN MENU SETUP And, selecting Setting will bring up the Track camera view along with a control panel to This interface is used to program the tracking routine for the camera. Clicking on the Track program the camera’s motion. button will bring up the live view for that camera plus a control panel: PICTURE 4-45 The dome’s rotation can be controlled vertically, horizontally and diagonally along with its speed. The lens zoom, focus and iris (light level) can be set as well. Select th

Summary of the content on the page No. 18

CHAPTER 4 MAIN MENU SETUP 4.9 ADVANCED 4.10 FILE SEARCH, PLAYBACK AND MANAGEMENT In this set of commands, the user can erase all the settings, import or export data files to Access the recordings on the DVR, play them back and backup the recordings to an external and from the DVR and control who can remotely access the DVR through three submenus: storage device. Reset, Import/Export and Black/White List. Four submenus appear in this section: Time RESET Search, Event Search, File Managemen

Summary of the content on the page No. 19

CHAPTER 4 MAIN MENU SETUP EVENT SEARCH IMAGE Selecting this tab will bring up a list of recorded events. You can choose whether to display This tab functions much as the Event Search tab by allowing you to search for and view the events triggered by Motion, Sensor or both. still images captured when you click on the Snapshot icon on the Control Bar. These images are stored on the DVR’s hard drive just as with video files. Double-click the event file you wish to play back. Select the date to

Summary of the content on the page No. 20

CHAPTER 6 DVR MANAGEMENT CHAPTER 6 CHAPTER 5 DVR MANAGEMENT BACKUP This DVR supports backing up files to USB flash drives, USB hard drives and USB DVD 6.1 INFORMATION burners through the USB port on the front panel. Remote backups can be performed over the Internet. Refer to Section 7.6 Remote Backup. NOTE! External USB hard drives used for backing up data will need to be in the FAT32 format. Most new drives will need to be reformatted before use with this DVR. Selecting BACKUP in the Main


Alternative user manuals
# User manual Category Download
1 Q-See QSDT8PCRC User manual DVR 89
2 Q-See QSTD2404 User manual DVR 24
3 Q-See QSTD2408 User manual DVR 30
4 Q-See MODEL QC40198 User manual DVR 13
5 Q-See QSTD2416 User manual DVR 11
6 Q-See QSD2216 User manual DVR 9
7 Q-See MODEL QC40196 User manual DVR 10
8 Q-See QT426 User manual DVR 164
9 Q-See QT454 User manual DVR 307
10 Q-See QT428 User manual DVR 377
11 Q-See - Digital Peripheral Solutions9004 User manual DVR 24
12 Q-See - Digital Peripheral Solutions User manual DVR 8
13 Q-See - Digital Peripheral SolutionsQR User manual DVR 4
14 Q-See - Digital Peripheral SolutionsQS206 User manual DVR 8
15 Q-See - Digital Peripheral SolutionsQSD2316C16-500 User manual DVR 1
16 Sony DIRECTV RECEIVER SAT-W60 User manual DVR 1
17 Sony DCR-TRV75 User manual DVR 7
18 Sony DSR-1800 User manual DVR 83
19 Sony BKDW-514 User manual DVR 2
20 Sony BKDW-509 User manual DVR 4