Summary of the content on the page No. 1
Owner’s Manual
Summary of the content on the page No. 2
Important Safety Instructions SAVE THESE INSTRUCTIONS INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS WARNING TO REDUCE THE RISK OF CAUTION FIRE OR ELECTRIC RISK OF ELECTRIC SHOCK SHOCK, DO NOT EXPOSE DO NOT OPEN THIS PRODUCT TO RAIN OR MOISTURE. AVIS : RISQUE DE CHOC ELECTRIQUE - NE PAS OUVRIR. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lighting flash w
Summary of the content on the page No. 3
The product is not completely disconnected from the Failure to do so may cause fire in case of lightning. power supply even when the power switch is turned Failure to do so may over-heat the product, resulting off. If the product will not be used for a long time, in fire. unplug the AC power cord from the AC outlet. This product may be equipped with a polarized line plug (one blade wider than the other). This is a safety feature. If you are unable to insert the plug into the outlet, contact a
Summary of the content on the page No. 4
Do not place open flame sources, such as lighted candles on the product. The mains plug shall remain readily operable. Use the apparatus only in moderate climates (not in tropical climates) The product should be serviced by qualified service personnel when: The power supply cord or the plug has been damaged. Objects have fallen, or liquid has been spilled into the product. The product has been exposed to rain. The product does not appear to operate normally or exhibits a marked change in pe
Summary of the content on the page No. 5
5
Summary of the content on the page No. 6
6
Summary of the content on the page No. 7
WELCOME TO THE MP5 Thank you for purchasing the KAWAI MP5. The MP5 Stage Piano features 256 Internal Sounds of the highest quality. The MP5 can also be used as a MIDI master controller. On stage, at home, or in the studio, the MP5 has been designed to offer quick and easy access to many sophisticated features. BASIC FEATURES of the MP5 4 ASSIGNABLE ZONES The MP5 keyboard can be divided into 4 zones. Each zone can be set to INT, EXT or BOTH individually. INT (Internal) is to play any of the
Summary of the content on the page No. 8
TABLE OF CONTENTS 6.2.9 Prg # (Ext only).....35 WELCOME TO THE MP5.....7 6.2.10 TX Bank (Ext only).....35 6.2.11 Bank MSB/LSB (Ext only).....35 1. NAMES AND FUNCTIONS.....10 6.2.12 Keyboard On/Off (Ext only).....35 1.1 FRONT PANEL.....10 6.2.13 Key Range Hi/Lo .....36 1.2 HEADPHONE JACK.....12 6.2.14 Velocity Switch.....36 1.3 REAR PANEL.....12 6.2.15 Velocity Switch Value.....36 6.2.16 Velocity Compression.....37 6.2.17 Velocity Offset.....37 2. Basic Operations.....14 6.2.18 Zone Transpose....
Summary of the content on the page No. 9
8.2.11 Receive Channel.....49 8.2.12 LCD Contrast.....49 8.2.13 LED Brightness.....49 8.2.14 Out Mode.....49 8.2.15 Foot Switch Mode .....49 8.2.16 Wheel Mode .....50 8.2.17 Dump Mode .....50 8.3 System Dump.....50 8.3.1 Dump Current.....50 8.3.2 Dump All Sound.....51 8.3.3 Dump All Setup.....51 8.4 System Reset.....52 8.4.1 Reset One SOUND/SETUP.....52 8.4.2 Reset All.....52 9. OTHER.....53 9.1 MIDI IN.....53 9.2 SETUP Program Number Table.....53 9.3 SOUND Program Number List.....54 9.4 Notes a
Summary of the content on the page No. 10
1. NAMES AND FUNCTIONS 1.1 FRONT PANEL [FADER SECTION] 1. VOLUME Fader The VOLUME fader controls the master volume level of the MP5. 2. ZONE SELECT buttons The ZONE SELECT buttons are used to select one of the four zones for editing. Only one zone can be selected at a time. The front panel setting represents the current zone status. 3. ON/OFF buttons The ON/OFF buttons are used to turn zones ON/OFF. When the button is lit, the zone is active. Normally the button color is red, but when a zone
Summary of the content on the page No. 11
[EFFECT BUTTONS] 11. SW button This button turns the assigned function ON or OFF. Many different functions can be assigned to this switch for your convenience. When in edit mode, pressing the SW button will exit from edit mode. 12. EFX button This button turns the EFX ON or OFF for the selected zone. 13. REVERB button This button turns the REVERB ON or OFF for the selected zone. To change the function or type assigned to the above buttons, press and hold the desired button to display the curren
Summary of the content on the page No. 12
1.2 HEADPHONE JACK The headphone jack is located in front at the left end of the key slip. Use a headphone with a standard stereo 1/4 inch phone jack. 1.3 REAR PANEL 1. POWER SWITCH Turns the MP5 ON or OFF. 2. POWER RECEPTACLE Connect the power cable, which is included in the MP5 package, to this receptacle. 3. MIDI JACKS These jacks are used to connect the MP5 with external MIDI devices such as a MIDI sound module or a MIDI sequencer. 4. USB JACK This jack is used to connect the MP5 with a per
Summary of the content on the page No. 13
13
Summary of the content on the page No. 14
2. Basic Operations 2.1 Getting Ready Since the MP5 has no built-in speakers, you will need to connect a mixer, keyboard amplifier or headphones in order to listen. Turn the MP5 on, using the POWER SWITCH on the rear panel. It is recommended to turn the MP5 on before turning on any amplifiers in order to avoid switching noise. What you need to know before starting: Please read this part for a better understanding of the MP5 structure. The MP5’s SOUND and SETUP modes are largely the same. The ma
Summary of the content on the page No. 15
2.2 Selecting a Sound The MP5 always starts up in SOUND mode when the power is turned ON. The SOUND button will be lit to indicate SOUND mode is active. Operation 1 Select the sound category by pressing a sound select button in the top row. There are 3 rows of sound select buttons, the top row is for selecting a sound category and the second and third rows are for selecting a variation. For example, to select "60’s EP2", first press the E.PIANO in the top row and the first sound in the E.PIANO
Summary of the content on the page No. 16
In Sound mode, the “1” in the display indicates that the zone 1 is currently selected. When the multitimbre is off, the default settings of the zones are as follows. It is recomended for simple MIDI transmit/receive use on stage etc. The default TXchannel is System Ch (see page45). Zone 1 Internal On (Plays internal sound) Zone 2 Internal Off (Muted) Zone 3 External On (Plays external device) Zone 4 External Off (Muted) When the multitimbre is on, the default sett
Summary of the content on the page No. 17
2.3 Layer Let’s try layering another sound. Turn the zone 2 on by pressing the ZONE ON/ OFF button for zone 2. The ZONE SELECT button for zone 2 is automatically selected and the display shows the sound name for zone 2. Select the sound for zone 2 with the SOUND SELECT buttons as shown in the previous section. Adjust the volume balance of zone 1 and 2 with the faders for each zone. 2.4 Split Now let’s split the keyboard and play different sounds in upper and lower sections. Press and hold the
Summary of the content on the page No. 18
2.5 Piano Only The Piano Only function lets you quickly return the MP5 sounds to the default settings. Press the PIANO button and the SOUND SELECT button 1 simultaneously. All the current settings (except for SYSTEM settings) will go back to original and only Concert Grand sound can be played on the whole keyboard. Note: You may use this function also as a kind of Panic or Reset button. Also it is a good starting point to create Setups from scratch. 2.6 Metronome A metronome is available on th
Summary of the content on the page No. 19
The display shows the current TRANSPOSE amount when the TRANSPOSE button is held down. A value of “0” indicates no transposition. 2.8 Using the MP5 as a MIDI controller The MP5 can control external devices via MIDI. MIDI Connection Connect the MIDI OUT on the MP5 to the MIDI IN on an external MIDI device with a MIDI cable. Selecting the MIDI Channel The MIDI Transmit Channel of the MP5 must be matched with the Receive Channel of any MIDI devices connected to the MP5. Select zone 3 by pressing t
Summary of the content on the page No. 20
UPPER SECOND THIRD PROG#:MSB-LSB 1 1 A 001:000-000 1 1 B 002:000-000 1 1 C 003:000-000 1 1 D 004:000-000 1 2 A~D 005:000-000 ~ 008:000-000 1 3 A~D 009:000-000 ~ 012:000-000 1 4 A~D 013:000-000 ~ 016:000-000 1 5 A~D 017:000-000 ~ 020:000-000 1 6 A~D 021:000-000 ~ 024:000-000 1 7 A~D 025:000-000 ~ 028:000-000 1 8 A~D 029:000-000 ~ 032:000-000 2 1~8 A~D 033:000-000 ~ 064:000-000 3 1~8 A~D 065:000-000 ~ 096:000-000 4 1~8 A~D 097:000-000 ~ 128:000-000 5 1~8 A~D 001:000-001 ~ 032:000-001 6 1~8 A~D 033
