Summary of the content on the page No. 1
452/453/457
LCD TV
Installation manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model Serial No.
LC452_453_457-hotel.indd 1 2010-04-12 오후 8:37:19
Summary of the content on the page No. 2
Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance. Product design and specifications may be changed without notice. Instruction This TV is provided with interactive functionality through a set-back box (SBB/STB) connected to the TV, and with other TVs in a computer controlled system for hotels and other hospitality businesses. Interactive : When the TV is powered-up initially, it sends a command to identify the SBB/STB;
Summary of the content on the page No. 3
ENGLISH Contents y Accessories .............................................................................................................................................................. 4 y Install the Stand ........................................................................................................................................................ 4 y How to Adjust the Stand (19inch model only) .......................................................................................
Summary of the content on the page No. 4
Accessories ✎ Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer. ✎ The items’ colour and shapes may vary depending on the models. y Remote Control & Batteries (AAA x 2) y Cleaning Cloth y Owner’s Instructions y Power Cord / Data Cable y Warranty Card / Safety Guide / Registration Cards (Not available in all locations) Blanking Bracket ✎ The stand and stand screw may not be included depending on the model. ✎ The Data Cable may not b
Summary of the content on the page No. 5
How to Adjust the Stand (19inch model only) 1. Place the front of the TV onto a soft cloth or cushion on a table as in Figure 1. ✎ Align the TV bottom along the table edge. 1 2. Press on the center of the TV back. Adjust the stand as in Figure 2 while ✎ pressing the button on the back of the stand. 3. Place the TV on the table so that the TV sits safely on the table. 2 How to Adjust the Angle of the TV (19inch model only) ✎ When you adjust the stand, press the button on the back of the stan
Summary of the content on the page No. 6
Installing VESA Compliant Mounting Devices (19inch model only) Button 1. Place the TV face down on a soft cloth or cushion on a table. 2. Adjust the stand, pressing the button on the back of the stand. 1 Mounting pad 3. Align the mounting interface pad (not supplied) with (Sold separately) the holes in the stand bottom and secure it with the four screws that come with the arm-type base, wall mount hanger or other bases (not supplied). 2 Using the Decoration Covers (19inch model only) 1. Wh
Summary of the content on the page No. 7
Installing the LCD TV Stand (19inch model only) If any items are missing, contact your dealer. ✎ When installing the stand, use the provided components and parts. ⓐ Screws: 3EA ⓑ Screws: 4EA Stand Cover Neck Guide Stand Screws 1 2 Back Front 3 4 Position 2 Front Position 1 Back 1. Insert the Cover Neck into the groove of the stand. Assemble the LCD TV stand by aligning the triangle figures indicated by the arrow marks. 2. Place the Guide Stand onto the stand which is assembled in step 1 and
Summary of the content on the page No. 8
HDMI IN3 HDMI IN3 HDMI IN3 Viewing the Connection Panel LE32C452C4HXXC 12 3 4 6 7 LE32C453C4HXXC LA32C457C6HXZN LA37C457C6HXZN 4 ANT IN LA40C457C6HXZN 8 9 Power Input % $ # @ ! 0 LE32C457C6HXXC 12 3 4 5 6 7 LE37C457C6HXXC LE40C457C6HXXC 5Vdc/2.5A 4 ANT IN (12Vdc/1.5A) 8 9 Power Input % $ # @ ! 0 LE26C452C4HXXC LE26C453C4HXXC 1 2 3 4 6 7 LA26C457C6HXZN 4 ANT IN 8 9 Power Input % $ @ ! 0 # English 8 LC452_453_457-hotel.indd 8 2010-04-12 오후 8:37:25
Summary of the content on the page No. 9
HDMI IN3 LE26C457C6HXXC 1 2 3 4 5 6 7 4 5Vdc/2.5A ANT IN (12Vdc/1.5A) 8 9 Power Input % $ @ ! 0 # LE19C452C4HXXC $ 8 4 6 7 LE19C453C4HXXC LE22C452C4HXXC LE22C453C4HXXC LE22C457C6HXXC AV IN 9 3 Power Input # @ 0 ✎ Whenever you connect an external device to your TV, make sure that power on the unit is turned off. ✎ When connecting an external device, match the color of the connection terminal to the cable. 1 VARIABLE AUDIO OUT: Used for the audio output to the Bathroom speaker. Connect the Bathro
Summary of the content on the page No. 10
7 PC IN: Connect to the video output jack on your PC. Display Modes Both screen position and size will vary depending on the type of PC monitor and its resolution. The resolutions in the table are recommended. ✎ Optimal resolution is 1360 X 768 @ 60 Hz. (Only for 19" 22" 26" 32" models) Pixel Clock Horizontal Frequency Vertical Frequency Sync Polarity Mode Resolution Frequency (KHz) (Hz) (H / V) (MHz) 640 x 350 31.469 70.086 25.175 +/- IBM 720 x 400 31.469 70.087 28.322 -/+ 640 x 480 35.000 66
Summary of the content on the page No. 11
✎ When using an HDMI / DVI cable connection, you must use the HDMI (DVI) IN 1 jack. ✎ The interlace mode is not supported. ✎ The set might operate abnormally if a non-standard video format is selected. ✎ Separate and Composite modes are supported. SOG is not supported. 8 USB (HDD) / CLONING – Connector for software upgrades and Media Play, etc. – Service connection. 9 AV IN 1, 2 – Connect a VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder. – Connect audio cables
Summary of the content on the page No. 12
Viewing the Control Panel ✎ The product colour and shape may vary depending on the model. Remote control sensor Power Indicator Speakers SOURCEE Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTERE button on the remote control. MENU Displays an on-screen menu, the OSD (on screen display), of your TV’s features. y Adjusts the volume. In the OSD, use the y buttons as you would use the ◄ and ► buttons on the remote control. z Changes
Summary of the content on the page No. 13
Viewing the Remote Control ✎ This is a special remote control for the visually impaired persons and has Braille points on the Power, Channel and Volume buttons. POWER SOURCE Turns the TV on and off. Display and select the available video sources. HDMI Selects the HDMI mode directly. Have direct access to channels. Alternately selects Teletext, Double or Mix. TTX/MIX PRE-CH Return to the previous channel. Cut off the sound temporarily. Adjust the volume. Change channels. CH LIST Display chann
Summary of the content on the page No. 14
Connecting the TV with SBB LE32C452C4HXXC TV Rear Panel LE32C453C4HXXC LA32C457C6HXZN LA37C457C6HXZN LA40C457C6HXZN AN ANT T 2 IN 2 IN Hotel Server (CABLE) (CABLE) STB(Set Top Box) or SBB(Set AN ANT T 1 1 IN IN (AIR (AIR) ) Back Box) ETH MODEM Data Cable LE32C457C6HXXC TV Rear Panel LE37C457C6HXXC LE40C457C6HXXC 5Vdc/2.5A DC-POWER AN ANT T IN IN (12Vdc/1.5A) DC Cable ETH MODEM Data Cable Hotel Server STB(Set Top Box) or SBB(Set Back Box) LE26C452C4HXXC TV Rear Panel LE26C453C4HXXC L
Summary of the content on the page No. 15
LE26C457C6HXXC TV Rear Panel 5Vdc/2.5A DC-POWER AN ANT T IN IN (12Vdc/1.5A) DC Cable ETH MODEM Data Cable Hotel Server STB(Set Top Box) or SBB(Set Back Box) LE19C452C4HXXC LE19C453C4HXXC LE22C452C4HXXC LE22C453C4HXXC LE22C457C6HXXC A AV V IN IN Hotel Server STB(Set Top Box) or SBB(Set Back Box) ETH MODEM Data Cable 1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB(SBB) with the Data cable. ✎ Use data communication. 2. Connect the [Class 2 Wiring-5V DC/2.5A (12V
Summary of the content on the page No. 16
Warning When you use the DC power output jack, you have to check the standard output power of STB(SBB) and you should use the DC power within the standard output(Class 2 Wiring-5V DC/2.5A (12V DC/1.5A). – For 5V SBB, SBB load current must not exceed 2.5A. – For 12V SBB, SBB load current must not exceed 1.5A. – The initial output is 5V. – For 12V SBB, you have to change the output voltage to 12V in order to use the power. Changing the Output Voltage (Only for EU C457 26" 32" 37" 40" model) 1
Summary of the content on the page No. 17
Connecting the Bathroom Speakers You can connect the Bathroom Speakers in the following method. ¦ Connecting through the Variable Output (available without an external amplifier) TV Rear Panel 5Vdc/2.5A 5Vdc/2.5A AN ANT T IIN N ( (12Vdc/1.5A) 12Vdc/1.5A) Speaker 1 Volume Control Box 2 VOL+ VOL- 1. Connect the VARIABLE AUDIO OUT port of the TV to the Bathroom Wall Speakers of the hotel. Signal wire : Speaker + Shield wire : Speaker - 2. Connect the VOL-CTRL jack of the TV to the Volume Control Bo
Summary of the content on the page No. 18
y Variable Output Port Specifications – Speaker Wire: Use speaker cable no more than 82 feet (25m) in length. Volume Control Box VOL + 1 3 2 VOL - VOL - DOWN VOL - UP GND ( White 1 ) ( Black /Red 2 ) ( Shield Wire 3 ) ¦ Connect through the Fixed Output (available without an external amplifier) Audio TV Rear Panel Amplifier 1 Stereo AUDIO IN cable 1. Connect the AUDIO OUT port of the TV and the Audio In port of the audio amplifier with a stereo cable. English 18 LC452_453_457-hotel.indd 18 2
Summary of the content on the page No. 19
Connecting the MediaHub HD Output of any external source connected to MediaHub HD on hotel desk. TV Rear Panel MediaHub HD Rear HDMI USB RS/232 5 5Vdc/2.5 Vdc/2.5A A AN ANT T IN IN (12Vdc/1.5A) (12Vdc/1.5A) 2 HDMI cable 1 RS-232 Data Cable 1. Connect the RJP port of the TV and the RS/232 port of the MediaHub HD. 2. Connect the HDMI port of the TV and the HDMI port of the MediaHub HD. y MediaHub HD – The MediaHub HD is a hardware module that has different Audio Video inputs (A/V, Audio, PC, HD
Summary of the content on the page No. 20
HDMI IN3 HDMI IN3 RS/232 Connecting the RJP (Remote Jack Pack) Output of any external source connected to RJP on hotel desk. 5 TV Side Panel 4 HDMI cable TV Rear Panel USB HDMI S-VIDEO RCA AUDIO/PC 5Vdc 5Vdc/2.5 /2.5A A AN ANT T IN IN (12Vdc/1.5A) (12Vdc/1.5A) RJP Rear 1 D-sub / PC Audio cable or 2 Video / Audio Cable 3 Audio Cable 1. Connect the PC IN / PC/DVI AUDIO IN port of the TV to the PC/AUDIO port of the RJP. 2. Connect the AV IN [VIDEO]/[L-AUDIO-R] port of the TV to the S-VIDEO por
