Summary of the content on the page No. 1
USER MANUAL
HDTV Monitor
DSC-34W70N
Summary of the content on the page No. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk electric shock. The exclamation point within an equil
Summary of the content on the page No. 3
IMPORTANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIP- MENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 7 Slots and openings in the cabinet and the back or bottom are provided for ventilation 2 Save these instructions for later use. and to ensure reliable operation of the television equipment; and to protect it 3 Unplug this television equipment from the from overheating, thes
Summary of the content on the page No. 4
(f) When the television equipment exhibits 13 An outside antenna system should not be a distinct change in performance - this located in the vicinity of overhead power indicates a need for service. lines or other electric light or power circuits, or where it can fall into such 18 When replacement parts are required, be power lines or circuits. When installing an sure the service technician has used outside antenna system, extreme care replacement parts specified by the should be taken to keep fr
Summary of the content on the page No. 5
CONTENTS PREPARATION CONNECTING ANTENNA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 NAME OF EACH PART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 BASIC TIPS FOR OPERATION TO WATCH TV PROGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 6
CONNECTING ANTENNA VHF/UHF OUTDOOR ANTENNAS NOTE: Bad picture reception could often be caused by bad antenna connection. Be sure to check the antenna direction, its height, etc. In case of using single antenna cable VHF Antenna LTo Receive Cable Programs VIDEO 1 VIDEO S-VIDEO 2 MONITOR SURROUND OUTPUT OUTPUT Plug CATV coaxial cable in the VIDEO VIDEO L L L W AUDIO AUDIO R R R Y Y UHF Pb L Cb L antenna socket (unit) at the back of Pr R Cr R ANT IN VIDEO AUDIO VIDEO AUDIO DTV INPUT DVD INPUT the T
Summary of the content on the page No. 7
NAME OF EACH PART Front and Side of TV set The buttons installed on the front of the TV set is functioning as same as those on the Remote Control. 1 2 3 4 1. Timer Indicator Lights up red when you have set the HDTV Monitor’s automatic timers. 2. Power Indicator Lights up green when you have turned the HDTV Monitor on. 3. Remote Control Signal Sensor Receives signals from the remote control. 4. Power Button Turns your HDTV monitor on or off. 5. TV/VIDEO button Each time you press the TV/VIDEO bu
Summary of the content on the page No. 8
Side panel inputs On the right side panel of the HDTV Monitor, you will find the Video 3 inputs and Headphone jack. These are provided to connect a camcorder or other video equipment without reaching around to the rear panel. HEADPHONE : provides a connection for headphones. 8
Summary of the content on the page No. 9
REMOTE CONTROL BUTTONS Remote Control ( )Number in the blank serves as an address; it shows the page number containing a detailed information on the functions of each button. 17 TV/VIDEO 12 TV Power (Conversion button) VCR Control Board 17 DTV Basic VCR functions are operated (Conversion button) with buttons on this board. Direct Channel 16 Selection Board Pressing the numbers on this board, you can select program channels of MODE buttons the screen directly. Press to select the
Summary of the content on the page No. 10
Note: Under the Cover of Remote Control When batteries are low, the Remote Control may not work. Change them immediately when they get weak. Be sure to use two 1.5V size AAA batteries. To use the buttons under the cover Do not use new batteries together with the old ones. PIP SEARCH 18~26 Simultaneous window selection is possible through the buttons of this board, and various layouts of the windows can be selected according to the user’s need or desire. TV/CATV 16 This button is used to c
Summary of the content on the page No. 11
TO WATCH TV PROGRAM To Watch TV Program Buttons on the front of the TV set have the same functions as those of the REMOTE CONTROL. STEP1/STEP4 STEP2 STEP3 BPress two number buttons of the Remote Control to select a channel directly. The numbers should be in digits. Examp.) To select channel 9, press “0” and “9” It may take some time to get to the channel when only “9” is pressed. 11
Summary of the content on the page No. 12
To Mute the Sound Instantly LThis function is used when there is a 1.Press the “TV POWER”button. phone call or a visitor. LPress “MUTE” button, to stop the Air 9 The TV screen will illuminate, and the power sound of the program. Mono indicator lamp will light up green. 2.Press the “CHANNEL” buttons. Mute Air 7 Press the “CHANNELx/y” or number buttons to - When this button pressed the sound Mono select the channel you want. goes off with the word “MUTE” Ex) Ch 7 displayed on the screen. - Pres
Summary of the content on the page No. 13
Automatic Memory of Channel LActual broadcasting channels can be 1.Press “MENU” button. set up in the “Memory” of the TV set through this function. The main menu will appear. With an automatic channel setup memory, desired channels can be selected easily with “CHANNELx/y” Picture buttons. Such inconvenience as pressing channel numbers one by Move Sel. Exit one is not necessary. LMENU mode automatically disappears in 20 seconds when 2.Select “Setup”. there is no button operation. If you want to
Summary of the content on the page No. 14
4.Press “VOLUMEC/B” buttons. Automatic Channel Memory function (Auto Program) starts. Checking from channel 2 to channel 69,(Cable1~125) Auto Program this function automatically memorizes only those Auto Programming channels which are actually broadcasting. When “MENU” button is pressed during the setup Air 13 process, the setup operation quits. Stop When the memory function is completed, a picture Set Up will appear on the screen as follows: Air/Cable Air Auto Program ( Ch Edit At this m
Summary of the content on the page No. 15
Add or Remove Channel from Memory LThis function is another way to 1.Select a channel. include a channel when cannot be a channel memorized due to a low Select a channel by pressing number buttons. Air 13 broadcasting signal. Mono Ex) Ch 13 2.Choose to add or erase from memory. Air 13 Press the “ADD/ERASE” Button. Add Whenever this button is pressed, the color of channel sign changes from green to red, and vice versa. Capture the Channel sign on green color When a channel is memorized, its c
Summary of the content on the page No. 16
Watching CATV Programs LWatching CATV programs is 1.Press “TV/CATV” button. possible only in areas where CATV services are provided. When pressed once The reception mode shifts from “AIR” to “CABLE”. Cable 12 Cable 12 When pressed twice Air 12 2.Select a channel. Select a channel by pressing either number buttons 0 - 9 or 100. When the channel number is bigger than 100, use the following example: Ex) If the number is 125, press number buttons: 100, 2, and 5 in sequence. Adjusting Screen Size
Summary of the content on the page No. 17
Watching Video Programs 1.Connect the video cable to the VIDEO socket at the back or the side of TV set, and press “TV/VIDEO” button on the remote control. The screen changes to video mode as follows: Video1 Whenever this button is pressed, the screen shifts in sequence : TV Video1 Video2 Video3 DVD TV 2.When this button is pressed, the screen changes to “DTV” mode from any other mode. To return to the previous mode, press “TV/VIDEO” button. DTV 17
Summary of the content on the page No. 18
ADJUSTING TWO PROGRAM WINDOWS Operating Two Program Windows LThe sound of TV set is available only 1.Press “PIP” button once. in the main program window (the left one). Single PIP appears on the screen. Air 7 Mono LIf you want to listen to the sound of an auxiliary window (the right one), use Headphones. 9 LWhenever “PIP” button is pressed, the screen changes cyclically as follows: 2.Press “PIP” button once more. The operating program window becomes the main Air 7 9 Mono window and moves t
Summary of the content on the page No. 19
VARIOUS FUNCTIONS OF SIMULTANEOUS WINDOW MODE Various Functions of Simultaneous Window Mode LSelect and enjoy programs you want to watch by using various functions 1.Press “MENU” button. of Simultaneous Window mode. Then the screen appears as follows: Picture Move Sel. Exit 2.Select “Funtion” button. Move the cursor to the “Funtion” menu by using “VOLUMEC/B” buttons. Select “Funtion” Sub-menu by using “CHANNELx” Function button. Move Sel. Exit 3.Select “PIP”. Function Move the blue bar to t
Summary of the content on the page No. 20
4.Press “VOLUMEC/B” buttons, and select the window mode you want. When the “VOLUMEC/B” buttons are pressed, the screen shifts in the following order: Single PIP Picture Twin picture Multi-picture(4) Off, and vice versa. Single PIP Picture Twin Picture Air 7 Air 7 9 Mono Mono 9 Multi-Picture(4) Air 7 9 Mono 11 13 The MENU mode disappears in 15 seconds automatically when there is no “MENU” button operation, and you can enjoy the selected Simultaneous Window programs.
