Fujitsu PDS4207E-H user manual

User manual for the device Fujitsu PDS4207E-H

Device: Fujitsu PDS4207E-H
Category: Flat Panel Television
Manufacturer: Fujitsu
Size: 0.69 MB
Added : 7/14/2013
Number of pages: 44
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Fujitsu PDS4207E-H. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Fujitsu PDS4207E-H.

For your convenience

If looking through the Fujitsu PDS4207E-H user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Fujitsu PDS4207E-H on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Fujitsu PDS4207E-H to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Fujitsu PDS4207E-H User manual - Online PDF
Advertisement
« Page 1 of 44 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Fujitsu PDS4207E-H but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Fujitsu PDS4207E-H. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

USER’S MANUAL
PDS4207W-H/PDS4207E-H
42” WIDE PLASMA DISPLAY
Contents
Page
Page
Before Use
Adjustments
• Safety Precautions ·········································· 3-5
Video Mode
• Features ····························································· 6 • Video Adjustments ·········································· 24-25
• Accessories ························································ 7 • Screen Adjustments ········································ 26-27
• What You Should Know ···········

Summary of the content on the page No. 2

DECLARATION OF CONFORMITY according to EN45014 We Fujitsu General (Euro) GmbH of Werftstraße 20, D-40549 Düsseldorf, F. R. Germany Manufacturer: Shinjyo Fujitsu General Limited 702-3 Kanezawa Shinjyo-shi Yamagata Japan declares under our sole responsibility that the product, Type: 42” PLASMA DISPLAY Model Name: PDS4207W-H/PDS4207E-H to which this declaration relates are in conformity with the following standards; European Standards: EMC: a.EN55022 1994, Class A b.EN61000-3-2 1995 c.EN61000-3-3 1

Summary of the content on the page No. 3

FCC NOTICE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Op

Summary of the content on the page No. 4

SAFETY PRECAUTIONS – This product should be operated only with the type of power source indicated on the label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. – This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician to install the proper outlet. Do not defeat the safety purpose of the grounded plug. –

Summary of the content on the page No. 5

– When replacement parts are required, be sure the service technician has used replacement parts speci- fied by the manufacturer or with same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. – The product should be placed more than one foot away from h

Summary of the content on the page No. 6

FEATURES VERTICAL INSTALLATION The dynamic vertical screen is obtained by installing the Plasmavision vertically. PLASMAVISION SUPPORTS The VGA full display and SVGA and XGA compression display suitable for personal computers A VARIETY OF INPUT TERMINALS The high quality image color difference signals such as DVD etc. can be input in addition to the video, S-video, and RGB. CONVENIENT POWER MANAGEMENT FUNCTION DPMS (Display Power Management Signaling) automatically minimizes power consumption. F

Summary of the content on the page No. 7

ACCESSORIES Checking Accessories Cable clamper × 2 Power cord Remote controller × 1 AA battery × 2 PDS4207W-H × 3 PDS4207E-H × 1 USER’S Screw A (10 mm) MANUAL Screw B (20 mm) AB User’s Manual × 1 Bracket × 2 (2 types) Screw × 2 (2 types) Cable clampers • The accessory cable clampers are for fastening the connected signal cables and a power cable. When installing this display on a wall or ceiling, insert the cable clampers into the holes on the rear of the display. Bundle connecting cables so t

Summary of the content on the page No. 8

WHAT YOU SHOULD KNOW POINTS ABOUT USAGE • When installing the display, use the optional desktop stand, wall-mounting unit, or ceiling mounting unit. Have the installation done by your product dealer. • When installing the display, refer to the installation manuals for the options. Further, be sure that the display does not lean to the side or backward. • Place the power cord and connection cables in a corner of the wall or floor so that they do not get caught on anything. • For good heat dissip

Summary of the content on the page No. 9

When wall-mounting unit used (vertically) Front view Side view Upper Wall mounting (vertical usage) 15 cm Wall 10 cm 10 cm Left Right 10 cm Lower 5 cm Power lamp • When mounting the Plasmavision vertically, make sure that the power lamp is at the lower right. Notes • Do not display the same picture (pattern) continuously for a long time. Doing so raises the brightness of the picture and may cause after-images. • Looking at the picture continuously for a long time can tire the eyes. View the di

Summary of the content on the page No. 10

PREVENTING EQUIPMENT FROM FALLING To prevent accidents and to ensure safety during disasters such as earthquakes, take precautions to ensure that the equipment cannot topple over. ATTACHING TO WALL OR COLUMN • Remove the display cover from both sides. Then, for both left and right sides, use screw A (10 mm) to attach bracket A to the screw hole (highest of the five holes on the side). • For both left and right sides, use screw B (20 mm) to attach bracket B to the wall. Then tie brackets A and B

Summary of the content on the page No. 11

NAMES OF PARTS AND THEIR FUNCTIONS Front view Bottom view VOLUME WIDE MENU (ADJUST) (SET) 1 3 Power lamp Operation panel • Shows the power status, ON or OFF. • POWER button: Switches the power on or off. • Lit (red)····Standby • MODE button: Selects the input mode. • Lit (green)····Power on • MENU button: For adjusting the video and audio to • Blinking (red)····Internal abnormality. Be certain to your taste. unplug the power cord. • VOLUME (ADJUST) buttons: Normally used for adjusting the vo

Summary of the content on the page No. 12

NAMES OF PARTS AND THEIR FUNCTIONS Rear view RGB 1 RGB 2 SYNC SW INPUT TTL AUDIO VIDEO S-VIDEO CONPONENT-VIDEO SYNC SW ANALOGRG B H V INPUT INPUT INPUT INPUT (75Ω ) TTL ANALOG R L Y Pb/B-Y Pr/R-Y INPUT RS232C (75Ω ) 5 11 RS-232C input terminal (RS-232C) Power switch 1 • Connects to the computer RS-232C output terminal. • When pressed, power lamp lights red, and the power can be turned on or off by the remote control- 12 Audio input terminals (AUDIO INPUT) ler. When this switch is pressed again

Summary of the content on the page No. 13

A Remote controller • POWER button • WIDE button P15 P16–19 Switches the power on or off. For selecting the desired wide screen • MODE button P15 • VOLUME buttons Selects the input mode. P15 For adjusting the volume • MENU button P20–39 • SET button For adjusting the picture and sound P20–39 For setting the menu items and ad- to your taste justment items • ADJUST button P20–39 For making adjustments from the menu screen • For the adjustment menu, see the pages below. Handy functions

Summary of the content on the page No. 14

NAMES OF PARTS AND THEIR FUNCTIONS Handling the remote controller Loading the batteries Press on the cover and slide Load two AA batteries, taking Close the cover until it clicks. in the direction of the arrow. 1 care that the + and – ends face 3 2 the correct direction. Reception range of remote controller Upper 20° 20° Lower 30° 30° Left Right 5m (Front) Points about usage • Use the remote controller pointed in the direction of the remote control reception section, making sure there is no obst

Summary of the content on the page No. 15

BASIC OPERATIONS PREPARATION Switch on the main power switch. Press the main POWER SWITCH at the rear. The power lamp lights (red). Pressing this switch again switches off the power. Press the POWER button. 1 The power lamp changes from red VIDEO to green. Example: VIDEO mode Select the video mode. 2 Select the video mode with the RGB 1 MODE button. Pressing the MODE button moves the mode to the next item as be- low. RGB 1 RGB 2 VIDEO Example: When RGB 1 selected COMP. V

Summary of the content on the page No. 16

VIEWING WIDE SCREEN (VIDEO MODE) SWITCHING THE WIDE SCREEN AUTOMATICALLY Press the WIDE button. 1 The current viewing mode is dis- played. NORMAL Example: NORMAL mode With the WIDE button, 2 select AUTO mode. Pressing the WIDE button moves the mode to the next item as be- low. AUTO NORMAL AUTO WIDE1 ZOOM2 ZOOM1 WIDE2 Example: When AUTO is selected When AUTO is selected, the wide screen is automatically selected according to the contents of the video. ∗ This operation

Summary of the content on the page No. 17

SETTING THE DESIRED WIDE SCREEN SIZE Press the WIDE button. 1 The current viewing mode is displayed. NORMAL Use the WIDE button to select the desired screen size. 2 Pressing the WIDE button moves the mode to the next item as below. NORMAL AUTO WIDE1 WIDE2 ZOOM1 ZOOM2 WIDE1 Select the wide screen size to suit the program. Example: When WIDE 1 is selected ∗AUTO mode cannot be selected in COMPONENT VIDEO mode. SCREENS ASPECT RATIO The aspect ratios

Summary of the content on the page No. 18

VIEWING WIDE SCREEN (RGB MODE) SETTING THE DESIRED WIDE SCREEN SIZE Press the WIDE button. 1 The current viewing mode is dis- played. NORMAL Example: NORMAL Use the WIDE button to 2 select the desired screen size. Pressing the WIDE button moves the mode to the next item as be- low. NORMAL WIDE WIDE Example: When WIDE is selected ∗ This operation can also be done using the buttons on the Display’s operation panel. 18

Summary of the content on the page No. 19

WIDE SCREEN MODES (RGB MODE) • When the screen is vertically wide WIDE Vertically wide video Points about usage • Note that use of a wide select function to change the screen size or aspect ratio during commercial use or for public viewing in a coffee shop, hotel, or the like, may infringe on copyrights protected by the copyright law. • To respect the intent of the creators of the original video, use NORMAL mode. • The RGB mode means both RGB 1 and RGB 2 modes. 19 ENGLISH

Summary of the content on the page No. 20

HANDY FUNCTIONS ON-SCREEN DISPLAY SETTING Select COMMON SET- 1 TINGS from the VIDEO MENU screen. VIDEO MENU 1) Press the MENU button. COMMON SETTINGS PICTURE 2) With the ADJUST button, POSITION/SIZE SOURCE select COMMON SETTINGS. OTHERS 3) Set by pressing the SET MENU QUIT SET ENTER SELECT button. Example: When COMMON SETTINGS is COMMON SETTINGS can be selected set in the same way from any mode menu. Select the adjustment 2 item. With the SET button, select DIS- PLAY. Pressing the SET but


Alternative user manuals
# User manual Category Download
1 Fujitsu P42HCA11 User manual Flat Panel Television 30
2 Fujitsu P42HCA10 User manual Flat Panel Television 12
3 Fujitsu P42HHA10W User manual Flat Panel Television 10
4 Fujitsu P42HCA12 User manual Flat Panel Television 2
5 Fujitsu P42HHA30E User manual Flat Panel Television 22
6 Fujitsu P42VCA10 User manual Flat Panel Television 2
7 Fujitsu P42HHA10A User manual Flat Panel Television 8
8 Fujitsu P42VHA10W User manual Flat Panel Television 0
9 Fujitsu P42VCA11 User manual Flat Panel Television 0
10 Fujitsu P42VHA20A User manual Flat Panel Television 1
11 Fujitsu P42VHA10A User manual Flat Panel Television 1
12 Fujitsu P42VHA20U User manual Flat Panel Television 3
13 Fujitsu P42VCA12 User manual Flat Panel Television 6
14 Fujitsu P42HHS30E User manual Flat Panel Television 5
15 Fujitsu P42VHA30E User manual Flat Panel Television 16
16 Sony 32LX1E User manual Flat Panel Television 81
17 Sony 4-180-179-16(1) User manual Flat Panel Television 13
18 Sony 4-106-868-11(1) User manual Flat Panel Television 7
19 Sony 32EX52X User manual Flat Panel Television 39
20 Sony 32EX42X User manual Flat Panel Television 24