Summary of the content on the page No. 1
RCP 5
SYSTEM REMOTE
OWNER’S MANUAL
(FOR USE WITH CP 55 SYSTEM)
Summary of the content on the page No. 2
TABLE OF CONTENTS 3 INTRODUCTION AND FEATURES 4 REMOTE CONTROL FUNCTIONS 8 BATTERIES 9 PROGRAMMING SOURCES ® 11 USING EzSET 12 ADVANCED FUNCTIONS 12 Punch-Through Programming 12 Macros 13 Resetting the Remote 14 APPENDIX 15 Remote Control Function List 17 Remote Control Product Codes 17 TV 18 VCR 19 CD 19 DVD 20 SAT 20 TAPE 20 CBL 2
Summary of the content on the page No. 3
INTRODUCTION AND FEATURES Please register your product on our Web site at www.harmankardon.com. Note: You’ll need the product’s serial number. At the same time, you can choose to be notified about our new products and/or special promotions. WWW.HARMANKARDON.COM ® Thank you for choosing Harman Kardon ! Your CP Series system combines the superior performance and practical flexibility of high-quality separate audio/video components with the convenience of a complete system in one carton. You will
Summary of the content on the page No. 4
REMOTE CONTROL FUNCTIONS The RCP 5 remote is capable of controlling 11 devices, including the 3. Press the Skip Up Button three times to advance three tracks. AVR 146 and the DVD 38 included in the CP 55 system. During the 4. Press the AVR Button to access the volume controls. installation process, you may program the codes for each of your source components into the remote. Each time you wish to use the codes for 5. Press the Volume Down Button until the volume level is satisfactory. any compon
Summary of the content on the page No. 5
EzSet Microphone IR Transmitter Lens Power On Mute Program/EzSet Indicator Power Off AVR Selector Input Selectors AM/FM 6-Channel Input Selector EzSet (SPL) Test Tone TV/Video/Video Off Sleep/Audio Select Volume Controls DSP Surround/Title On-Screen Display/Disc Info HD Mode Speaker Setup/DVD Setup Channel Level/Disc Menu Navigation Set/Enter Digital Input Select/ Drawer Open/Close Delay/DVD Status Numeric Keys Tuning Mode/Zoom Memory/Playlist Clear Direct Station Entry/Angle Tuning Preset Stat
Summary of the content on the page No. 6
REMOTE CONTROL FUNCTIONS Usually this is done using the on-screen menu system, as described Test Tone: Press this button to activate the test tone for manual in the Initial Setup section of the AVR 146 owner’s guide. output-level calibration. When the DVD player has been selected, this button serves the DVD TV/Video/Video Off: This button has no effect on the receiver, Setup function. Press it to use the DVD 38’s on-screen menu system to but is used to switch video inputs on some video source
Summary of the content on the page No. 7
REMOTE CONTROL FUNCTIONS When the DVD player has been selected, this button serves the A-B Tuning: Press these buttons to tune a radio station. Depending on Repeat function. The first press while a disc is playing selects the begin- whether the tuning mode has been set to Manual or Automatic, each ning of the passage you wish to repeat, and the second press selects press will either change one frequency step at a time, or seek the next frequency with acceptable signal strength. the end of the pa
Summary of the content on the page No. 8
BATTERIES The RCP 5 remote control uses three AAA batteries, which are included. To remove the battery cover located on the back of the remote, firmly press the ridged depression and slide the cover toward the top of the remote. Insert the batteries as shown in Figure 1, making sure to observe the correct polarity. Figure 1 – Remote Battery Compartment When using the remote, remember to point the lens toward the front panel of the AVR 146 or DVD 38. Make sure no objects, such as furniture, ar
Summary of the content on the page No. 9
PROGRAMMING SOURCES c) HDMI 1 Source: Press and hold the Input Selector until the Programming Sources selector relights and the Program Indicator flashes, then release it. The RCP 5 remote is capable of controlling not only the receiver and Next, press the Input Selector that corresponds to the device type DVD player included in your CP system, but it may also be programmed you want to program into the HDMI 1 mode, i.e., DVD, VCR or to control many brands and models of VCRs, CD players, cable b
Summary of the content on the page No. 10
PROGRAMMING SOURCES Table 1 – Remote Control Codes Source Input Product Type Remote Control Code (circle one) Video 1 VCR, PVR Video 2 Cable, Satellite Video 3 TV HDMI 1 DVD, VCR/PVR, Cable, Satellite HDMI 2 DVD, VCR/PVR, Cable, Satellite DVD DVD * CD CD, CD-R Tape Cassette Do not reprogram the DVD Source selector unless you are replacing * the DVD player included in the CP 55 system with another product. If you are unable to locate a code set that correctly operates your source device, it will
Summary of the content on the page No. 11
USING EzSET A tri-color LED on the remote indicates EzSet’s findings. The LED turns Using EzSet red if the channel’s level is too high, amber if the level is too low, and This section replaces Step Four in the Initial Setup section of the green when the level is correct. AVR 146 owner’s guide. The result is that each speaker will be heard equally loudly at the An essential step in setting up your multichannel audio/video receiver listening position. This is important for movie directors, who
Summary of the content on the page No. 12
ADVANCED FUNCTIONS The RCP 5 remote control not only operates the AVR 146 and DVD 38, NOTE: As mentioned earlier, the AVR, VID2 and VID3 devices but it also serves as a universal remote that may be programmed to are factory-programmed with transport-control punch-through operate many of your other home theater components. The punch- to operate the DVD player. You may reprogram these selectors through and macro features add even more flexibility and versatility. following the instructions in S
Summary of the content on the page No. 13
ADVANCED FUNCTIONS It isn’t possible to “edit” a command within a macro. However, you Resetting the Remote may erase the macro as follows: To reset the remote to its factory defaults, simultaneously press and 1. Simultaneously press and hold the Mute Button and the Macro hold any Input Selector and the “0” Numeric Key. When the LED flashes Button containing the macro until the Program LED flashes. amber, enter the code “333”. When the green LED goes out, the remote will have been fully reset.
Summary of the content on the page No. 14
APPENDIX 1 2 3 47 5 6 10 8 9 11 12 13 15 16 17 14 21 18 19 20 22 23 24 26 25 27 28 29 30 31 32 33 34 37 35 36 38 40 41 39 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 Refer to the numbered buttons in this drawing when using the Function List. Figure 4 – Remote Control Function List Reference 14
Summary of the content on the page No. 15
APPENDIX Table A1 – Remote Control Function List The TM Bridge No. Button Name AVR Function DVD CD/CD-R Tape VCR (VID1) TiVo (VID1) CBL (VID2) SAT (VID2) TV (VID3) (DMP) HDMI 1/2 1 Power On Power On Power On Power On Power On Power On/Off Power On Power On Power On Power On 2 Power Off Power Off Power Off Power Off Power Off TV Power Power Off Power Off Power Off Power Off 3 Mute Mute Mute (AVR) Mute (AVR) Mute (AVR) Mute Mute Mute Mute Mute Mute 4 AVR AVR Select AVR Select AVR Select AVR Sele
Summary of the content on the page No. 16
APPENDIX Table A1 – (continued) The TM Bridge No. Button Name AVR Function DVD CD/CD-R Tape VCR (VID1) TiVo (VID1) CBL (VID2) SAT (VID2) TV (VID3) (DMP) HDMI 1/2 39 Tun-M/Zoom Tuning Mode Zoom or Chapter+ Repeat * 40 9 99 9 9 9 9 9 9 9 41 0 00 0 0 0 0 0 0 0 42 Memory/Playlist Memory Playlist or Audio Time * 43 Tuning Up Tuning Up Next Chapter Track Direct Cancel Cancel Sleep * 44 Direct/Angle Direct Tuner Entry Angle Random Play FAV/Angle FAV Angle/FAV 45 Clear Clear Clear Clear Clear Clear Ne
Summary of the content on the page No. 17
APPENDIX Refer to Tables A2 through A9 when programming the codes for your components into the remote. Table A2 – Remote Control Product Codes – TV TV Manufacturer/Brand Setup Code Number TV Manufacturer/Brand Setup Code Number AIWA 027 LODGENET 069 A MARK 122 132 LOGIK 069 ADMIRAL 192 LUXMAN 128 AKAI 123 160 LXI 077 145 148 AMPRO 164 MAGNAVOX 030 123 128 132 145 148 ANAM 045 106 109 112 122 MARANTZ 115 123 148 AOC 122 123 128 MATSUI 148 BLAUPUNKT 084 MEMOREX 069 128 BROKSONIC 205 206 METZ 084 C
Summary of the content on the page No. 18
APPENDIX Table A2 (continued) Table A3 (continued) TV Manufacturer/Brand Setup Code Number VCR Manufacturer/Brand Setup Code Number TEKNIKA 045 069 115 123 128 132 MARANTZ 018 TELERENT 069 MEMOREX 017 020 040 052 053 054 076 TERA 156 MGA 049 THOMSON 190 191 MITSUBISHI 049 131 TMK 128 MULTITECH 040 TOSHIBA 063 129 202 NAD 139 TOTEVISION 132 NATIONAL 140 VIDEO CONCEPTS 160 NEC 018 048 VIDTECH 128 NORDMENDE 048 WARDS 069 128 132 148 OPTIMUS 159 YAMAHA 123 128 ORION 147 YORK 128 PANASONIC 125 150 16
Summary of the content on the page No. 19
APPENDIX Table A4 (continued) Table A4 – Remote Control Product Codes – CD CD Manufacturer/Brand Setup Code Number CD Manufacturer/Brand Setup Code Number ADCOM 063 069 RCX 169 AIWA 072 111 118 156 170 REALISTIC 058 093 095 104 105 108 164 166 AKAI 050 177 184 SANSUI 047 081 134 157 172 AUDIO TECHNICA 053 SANYO 033 082 095 AUDIOACCESS 125 SCOTT 108 AUDIOFILE 211 SHARP 058 105 114 151 159 167 180 181 BSR 044 SHERWOOD 003 041 058 105 133 CALIFORNIA AUDIO 109 SONY 103 115 116 118 132 139 163 205 20
Summary of the content on the page No. 20
APPENDIX Table A6 – Remote Control Product Codes – SAT Table A7 – Remote Control Product Code – TAPE SAT Manufacturer/Brand Setup Code Number TAPE Manufacturer/Brand Setup Code Number HARMAN KARDON 001 ALPHASTAR 472 ALPHASTAR DBS 450 ALPHASTAR DSR 442 BIRDVIEW 425 Table A8 – Remote Control Product Codes – CBL CHANNEL MASTER 320 321 325 361 CBL Manufacturer/Brand Setup Code Number CHAPARRAL 315 316 451 CITOH 360 ABC 001 011 DRAKE 313 317 318 413 481 ALLEGRO 111 DX ANTENNA 331 352 379 483 AMERICAS
