Summary of the content on the page No. 1
Operating Instructions
Manual de instrucciones
High Defi nition Plasma Display
Pantalla de Plasma de Alta Defi nición
Model No.
TH-42PH11UK
Número de modelo
TH-50PH11UK
The illustration shown is an image.
Before connecting, operating or adjusting this product, please read these instructions completely.
Please keep this manual for future reference.
La ilustración mostrada es una imagen.
Antes de conectar, utilizar o ajustar este producto, lea completamente este manual de instrucciones;
y guárdelo
Summary of the content on the page No. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with The exclamation point within arrow-head within a triangle a triangle is intended to is in tend ed to tell the user tell the user that important that parts inside the product operating and servicing are a risk of electric shock instructions are in the papers to per sons
Summary of the content on the page No. 3
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi ers) that produce heat. 9) Do not defeat the safety purpose o
Summary of the content on the page No. 4
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new Plasma Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. Retain your purchase receipt as well, and record the model number and serial number of your set in the space provided on the rear cover of these instructions. Table of Contents Important Safety Instruction
Summary of the content on the page No. 5
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee tha
Summary of the content on the page No. 6
Safety Precautions CAUTION This Plasma Display is for use only with the following optional accessories. Use with any other type of optional accessories may cause instability which could result in the possibility of injury. (All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.) • Speakers .................................................. TY-SP42P8W-K (for TH-42PH11UK), TY-SP50P8W-K (for TH-50PH11UK), • Pedestal ....................................
Summary of the content on the page No. 7
Safety Precautions / Maintenance WARNING Securely insert the power cord plug as far as it will go. Setup • If the plug is not fully inserted, heat may be generated Do not place the Plasma Display on sloped or unstable which could cause fi re. If the plug is damaged or the surfaces. wall socket plate is loose, they should not be used. • The Plasma Display may fall off or tip over. Do not place any objects on top of the Plasma Do not handle the power cord plug with wet hands. Display. • Doing
Summary of the content on the page No. 8
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Remote Control Batteries for the Instruction book Transmitter Remote Control N2QAYB000178 Transmitter (2 × AA Size) Fixing band × 1 AC cord Remote Control Batteries Requires two AA batteries. 1. Pull and hold the hook, then 2. Insert batteries - note correct 3. Replace the cover. open the battery cover. polarity ( + and -). “AA” size - + + - Helpful Hint: For frequent remote control users, replace
Summary of the content on the page No. 9
Connections When connecting the speakers, be sure to use only the optional accessory speakers. Refer to the speaker’s Installation Manual for details on speaker installation. Speakers (Optional accessories) 1 2 1 Speaker terminal (L) 2 Speaker AC cord connection (see page 13) terminal (R) – AC cord fi xing Unplug the AC cord Close 1 Push until the hook Unplug the AC cord clicks. pressing the two 1 Plug the AC cord into knobs. the display unit. Plug the AC cord until Open 2 it clicks. 2. P
Summary of the content on the page No. 10
Connections PC Input Terminals connection (Female) COMPUTER AUDIO PC IN Conversion adapter (if necessary) Mini D-sub 15p RGB PC cable (Male) Audio Stereo plug Connect a cable which matches the audio output terminal on the computer. Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) • The display resol
Summary of the content on the page No. 11
Connections SERIAL Terminals connection The SERIAL terminal is used when the Plasma Display is controlled by a computer. (Male) COMPUTER 13 2 45 67 8 9 SERIAL RS-232C Straight cable Pin layout for SERIAL Terminal (Female) D-sub 9p Notes: • Use the RS-232C straight cable to connect the computer to the Plasma Display. • The computer shown is for example purposes only. • Additional equipment and cables shown are not supplied Signal names for D-sub 9P connector with this set. Details Pin No. The
Summary of the content on the page No. 12
Connections HDMI connection This unit has terminal boards equivalent to Dual HDMI Terminal Board (TY-FB10HMD) and BNC Component Video Terminal Board (TY-42TM6A) as standard equipment. [Pin assignments and signal names] Pin No. Signal Pin No. Signal T.M.D.S Clock 1 T.M.D.S Data2+ 11 Shield T.M.D.S Data2 2 12 T.M.D.S Clock- Shield RL AUDIO PR/CR/R PB/CB/B Y/G 3 13 T.M.D.S Data2- CEC COMPONENT/RGB IN 4 T.M.D.S Data1+ Reserved SLOT1 SLOT2 SLOT3 PC 14 T.M.D.S Data1 5 (N.C. on device) Shield
Summary of the content on the page No. 13
Power ON / OFF Connecting the AC cord plug to the Plasma Display. Fix the AC cord plug securely to the Plasma Display with the clamper. (see page 9) Connecting the plug to the Wall Outlet. Note: When disconnecting the AC cord, be absolutely sure to INPUT MENU -/ VOL +/ ENTER/ disconnect the AC cord plug at the socket outlet fi rst. Power Indicator Press the Power switch on the Plasma Display to turn the set on: Power-On. Power Indicator: Green Remote Control Sensor Press the button on the r
Summary of the content on the page No. 14
Power ON / OFF When fi rst switching on the unit Following screen will be displayed when the unit is turned on for the fi rst time. Select the items with the remote control. Unit buttons are invalid. OSD LANGUAGE English (UK) OSD LANGUAGE Deutsch Français 1 Select the language. Italiano Español 2 Set. ENGLISH (US) Русский PRESENT TIME SETUP SELECT SET 1 Select “DAY” or “PRESENT TIME OF DAY”. 2 Setup “DAY” or “PRESENT TIME OF DAY”. PRESENT TIME SETUP PRESENT TIME OF DAY MON 99:99 SET MON DAY
Summary of the content on the page No. 15
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Plasma Display. Input signals will change as follows: INPUT1 INPUT2A INPUT2B INPUT3 PC SLOT2 is for dual input so that you can select INPUT2A or INPUT2B for INPUT2. INPUT2A : HDMI signal terminal in SLOT2 INPUT2B : HDMI signal terminal in SLOT2 Notes: • Selecting i
Summary of the content on the page No. 16
Basic Controls Main Unit Remote control sensor Volume Adjustment Volume Up “+” Down “–” When the menu screen is displayed: “+” : press to move the cursor up “–” : press to move the cursor down (see page 22) Enter / Aspect button (see page 18, 22) INPUT MENU -/ VOL +/ ENTER/ Main Power On / Off Switch MENU Screen ON / OFF Each time the MENU button is pressed, the menu screen Power Indicator will switch. (see page 22) The Power Indicator will light. Normal Viewing PICTURE SET UP • Power-OFF .
Summary of the content on the page No. 17
Basic Controls Remote Control Transmitter SURROUND button The surround setting switches on and off each time the SURROUND button is ON OFF pressed. The benefi ts of surround sound are enormous. You can be completely enveloped in sound; just as if you were at a concert hall or cinema. Note: The surround settings are memorized separately for each AUDIO MENU (STANDARD, SURROUND ON DYNAMIC, CLEAR). ACTION button Press to make selections. OFF TIMER button The Plasma Display can be preset ASPECT b
Summary of the content on the page No. 18
ASPECT Controls The Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture. Press repeatedly to move through the aspect options: For details about the aspect mode, please see “List of Aspect Modes” (page 45). For VIDEO (S VIDEO) signal input: 4:3 ZOOM Panasonic AUTO JUST FULL [from the unit] Note: When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic AUTO cannot be selected. INPUT ME
Summary of the content on the page No. 19
ASPECT Controls For PC signal input: 4:3 Zoom 16:9 For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p): 4:3 Zoom1 Zoom2 Zoom3 16:9 14:9 Just For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]: 4:3 Full Zoom1 Zoom2 Zoom3 16:9 14:9 Just1 Just2 4:3 (1) 4:3 (2) MULTI PIP Press repeatedly. Each time pressing this button main picture and sub picture will be displayed as follows below. [Picture and Picture] [Pictur
Summary of the content on the page No. 20
MULTI PIP Advanced PIP Set “Advanced PIP” to “On” in Options menu. (see page 40) 1 2 Press repeatedly. Each time pressing this button main picture and sub picture will be displayed as follows. One screen Advanced PIP 1 2 3 4 Sub screen Main screen 8 7 6 5 Notes: • To use , , , buttons for the screen operations, follow the procedures in the previous page. • , and buttons are invalid during Advanced PIP operation. Notes: • If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP fun
