Summary of the content on the page No. 1
Instruction Manual
LCD-22L19
22" LCD TV/MONITOR
SIZE:A5
Description:
MANUAL(8M34A)
Job No. Brand Name:
95120H skyworth
MODEL: P/No.
22L19
REV:0 Scale:
Engineering Dept:
Artwork By: Date:
2009-06-04
Checked By: Date:
Approved By: Date:
Summary of the content on the page No. 2
SAFETY PRECAUTIONS Read all of the instructions before operating the set. Keep these instructions well for later use. PRODUCT The ventilation should not be impede by covering the ventilation openings with items, such as newspaper, table-cloths, curtains, etc. Do not push any objects of any kind into this unit through the cabinet slots as they could touch the current carrying parts or short-circuit parts, resulting in fire, electric shock, or damage to the unit. Unplug the set when it is not
Summary of the content on the page No. 3
SAFETY PRECAUTIONS USE ENVIRONMENT Do not install this equipment in a confined space such as a book case or similar unit. To prevent injury, this apparatus must be securely attached to the wall mount fastened on the wall. Place the set on a place that allows good ventilation. Do not use the set near damp, and cold areas, protect the set from overheating. Keep away from direct sunlight. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such a
Summary of the content on the page No. 4
CONTENT SAFETY PRECAUTION .................................................................................1 CONTENT ..................................................................................................... 3 INTRODUCTION, FUNCTIONS AND FEATURES ....................................... 4 EXTERNAL SCHEMATIC AND INSTALLATION ........................................... 5 5 FRONT PANEL ................................................................................... BACK PANEL .........
Summary of the content on the page No. 5
INTRODUCTION, FUNCTIONS AND FEATURES BRIEF INTRODUCTION: Thanks for your purchase of our digital high-definition LCD television! This product with diverse functions is designed to fulfill the optimum requirements from commercial, industrial and household uses. LCD television possesses the display function of both TV and PC. It features advanced picture performance, smaller in size and lighter in weight, meanwhile, consumes less power and makes no radiation. The new generation LCD provides yo
Summary of the content on the page No. 6
EXTERNAL SCHEMATIC AND INSTALLATION FRONT PANEL Note: The graphics are for representation only. 1 2 3 4 5 6 7 10 10 9 8 1.AV/TV Button 2.Menu Button 3.Program Up Button 4.Program Down Button 5.Volume Up Button 6.Volume Down Button 7.Standby Button 8.Power Indicator 9.Remote Sensor 10.Speakers 5
Summary of the content on the page No. 7
EXTERNAL SCHEMATIC AND INSTALLATION BACK PANEL Note: The graphics are for representation only. AV IN HDMI VGA Y Pb Pr S-VIDEO R-AUDIO-L VIDEO VGA AUDIO IN 75 ANT EARPHONE 1 2 3 4 5 6 7 8 1. HDMI:Connect HDMI input signal from signal source such as DVD. 2. VGA: Connect a PC via a VGA cable. 3. YPbPr (Component input): Connect YPbPr signal from signal source such as DVD. Share the same AUDIO input with AV. 4. S-VIDEO: C
Summary of the content on the page No. 8
EXTERNAL SCHEMATIC AND INSTALLATION ANTENNA/CABLE CONNECTION There are two kinds of antenna in use. VHF TV ANTENNA TWO KINDS OF ANTENNA UHF TV ANTENNA To TV VHF/UHF No need to install adapter ANTENNA jack (Note 1) U/V MIXER COAXIAL ANTENNA Need to install adapter VHF/UHF (75 ) (Note 2) FLAT CABLE 1. Connect the plug of the antenna cable or CATV cable to the cable (not provided with this unit), then connect to the antenna input of this unit for best reception.
Summary of the content on the page No. 9
EXTERNAL SCHEMATIC AND INSTALLATION REMOTE CONTROL 1. STANDBY BUTTON Press to turn the TV on or off(standby). 2. MUTE BUTTON Press to mute or restore the TV sound. 2 1 3. NUMBER BUTTONS Press to enter a channel number . 4. AV/TV BUTTON 3 Press to display the signal source selection menu. 5. RECALL BUTTON 5 4 Press this button to return to the 7 6 previously viewed program. 8 9 6. SLEEP BUTTON Press to select a time period after 11 which the TV will turn itself off. 10 7. INFO BUTTON 12 Pr
Summary of the content on the page No. 10
EXTERNAL SCHEMATIC AND INSTALLATION REMOTE CONTROL 18. SOUND TYPE BUTTON(NICAM) Press this button to select different sound type. Relevant sound types in TV SOURCE as below: 1. MONO: MONO 2. STEREO: MONO, STEREO 3. DUAL : MONO, DUAL1, DUAL2 NOTE: This button is unavailable for models without NICAM function. 19.TEXT BUTTON(OPTION) This button is used for entering the teletext MENU. 20.MIX BUTTON(OPTION) the button is used as closing /opening the teletext Background. 21.HOLD BUTTON(OPTION) Pr
Summary of the content on the page No. 11
EXTERNAL SCHEMATIC AND INSTALLATION For using the remote control, follow these instructions: 1. Open the back cover of the remote control, then insert two AAA batteries with polarities matching with the marks inside the battery compartment. Then, close the back cover. 2. Point the remote control towards the infra-red remote sensor on the main unit. If there is an obstacle between the main unit and remote control, the remote control may not operate properly. 3. Replace the bat
Summary of the content on the page No. 12
SETUP TV There are several steps you need to follow before you can turn on the TV. Follow the instructions below to set up and turn on your TV. Operation could be different base on existence of hard power switch. 1. Plug the end of the power cord into an appropriate wall outlet and connect the antenna cable or CATV cable. 2. Turn on the TV. When the power of the TV is connected, the power indicator lights up in red, the TV is in standby mode, press the " " button on the remote contr
Summary of the content on the page No. 13
MENU CONTROL This section explains the menus of your TV. Each menu is outlined and detailed to help you get the most from your TV. BASIC OPERATION 1. Press MENU on the remote control or on the TV key panel to display the main menu. 2. Press t/u and p/q to highlight the desired menu/item. 3. Press t/u to change the setting. 4. Press MENU to save setting and go back to last menu. 5. Press EXIT to exit the menu. Note: Button on the key panel have the same functions as the corresponding bu
Summary of the content on the page No. 14
MENU CONTROL SOUND SETTINGS Sound mode Select the audio mode as you desired. The audio mode are Standard,Music, Film, Voice. SOUND Bass Adjusts the lowest part of the sound. Sound mode Voice Bass Treble Adjusts the highest part of the sound. Treble Balance Balance Adjusts how much audio (loudness) gets Surround Off Sound type sent to the left and right speakers. FM MONO Move Select Return MENU Surround Set surround effect on or off This fun
Summary of the content on the page No. 15
MENU CONTROL Fine tuning Tune RF frequency finely. Skip Sets the current channel to skip or not. INSTALLATION Notes: 120.25MHZ Fine 1. If the channel is set to skip, you can not Off Skip Fav. channel select it by pressing PROGRAM UP/DOWN on the remote control. You can select it exactly by Move Select Return MENU entering channel No. Using number buttons on the remote control. 2.If a channel is set to skip, the channel No. colour FAV. CHANNEL
Summary of the content on the page No. 16
MENU CONTROL FUNCTION SETTINGS Language Select you desired OSD language. FUNCTION English Language Zoom select your desired picture zoom effect. 16:9 Zoom You can select 16:9 or 4:3(only available for wide screen OSD halftone Parent ctrl. modesl). OSD halftone select different OSD background MENU Move Select Return transparent by it . Parent ctrl. Enter Parental Control menu you can set control of it. PARENT CTRL. Press u or OK key to entr
Summary of the content on the page No. 17
SHORTCUT FUNCTIONS This section explains the shortcut and convenient functions . PICUTRE shortcut 1. Press the PICTURE button on the remote control to display the current picture state. 2. Press the PICTURE button repeatedly to select different picture effect. 3. The on screen display will disappear in 3 seconds if you stop adjusting. Note: You can select Standard, Bright, Personal or Soft. SLEEP shortcut 1. Press the SLEEP button on the remote control to display the sleep time. 2. Press
Summary of the content on the page No. 18
SHORTCUT FUNCTIONS Z-/Z+ shortcut( only available for wide screen models) Press to change the screen format: 4:3, 16:9. () Only available for wide screen models FAV. shortcut 1. Press the FAV. button on the remote control repeatly , it will select FAV. channel cyclely. 2. Set your favorite programs before this operation. INFO shortcut Press this button to display the settings on the screen. RECALL shortcut Press this button to return to the previously viewed program. 17
Summary of the content on the page No. 19
TROUBLESHOOTING NO PICTURE, NO SOUND SNOWY DOTS AND INTERFERENCE If the antenna is located in the fringe area of a 1. Check if the fuse or circuit breaker is working. television signal where the signal is weak, the 2. Plug another electrical device into the outlet to make sure it is working or turned on. picture may be marred by dots. When the signal is extremely weak, it may be necessary to install 3. Power plug is bad contact with the outlet. a special antenna to improve the receptio
Summary of the content on the page No. 20
SPECIFICATIONS Mode: LCD-22L19 Audio output power (L+R): 2W+2W Working voltage: 100-240V~ 50/60Hz Rated power consumption: 60W Screen size - diagonal: 54.8cm Dimensions (W x D x Hmm): 528 x 200 x 390mm Net weight: 4.3Kg Environment: oo Working temperature: 5 C~35 C Working humidity: 20%~80% oo Storage temperature: -15 C~45 C Storage humidity: 10%~90% Channel coverage: 470MHz Full-Channel Cable TV System: TV: PAL, SECAM, NTSC, BG/D
