Philips Comfort-Cire AMC 45 user manual

User manual for the device Philips Comfort-Cire AMC 45

Device: Philips Comfort-Cire AMC 45
Category: Air Conditioner
Manufacturer: Philips
Size: 2.15 MB
Added : 3/30/2014
Number of pages: 24
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Philips Comfort-Cire AMC 45. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Philips Comfort-Cire AMC 45.

For your convenience

If looking through the Philips Comfort-Cire AMC 45 user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Philips Comfort-Cire AMC 45 on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Philips Comfort-Cire AMC 45 to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Philips Comfort-Cire AMC 45 User manual - Online PDF
Advertisement
« Page 1 of 24 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Philips Comfort-Cire AMC 45 but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Philips Comfort-Cire AMC 45. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

Wall Mount Split Units
AMW/AMC 25, 30, 45 &60
by AITONS'
AMW / AMC SERIES
Installation, Operation
And Maintenance Manual
Please read this manual before
installing and operating the unit
CONTENTS
INSTALLATION INSTRUCTIONS
! Tools / Supplies
! Safety considerations
! Selection of location
! Recommended height and length
! Installation Method
! Refrigerant piping & drainage
! Electrical wiring
OPERATING INSTRUCTIONS
! Operating tips
! Product description
! Auxiliary control
! Remote control opera

Summary of the content on the page No. 2

INSTALLATION INSTRUCTIONS TOOLS AND SUPPLIES The following tools are needed The following materials are required: for installation. 1. Level 1. Correct size copper tubing 2. Hole Saw 2. Correct size drain pipe 3. Core bits 3. Sleeve and bush 4. Hammer 4. Vinyl tape 5. Drill 6. Torque wrench 5. Saddle & Clamps to support 7. Adjustable wrench refrigerant piping 8. Flat head screwdriver 6. Power supply cable 9. Philips head screwdriver 7. Insulation material

Summary of the content on the page No. 3

SELECTION OF LOCATION Select a convenient location where: INDOOR UNIT ! The cool air can reach every corner of the area to be cooled. ! The unit is away from any direct heat source ! Easy and short routing of the refrigerant and drain pipes to the exterior. ! There are no flammable gas, alkaline or acid present in the air. ! Air circulation is not obstructed, preventing good air circulation. ! The structure where the unit is installed should be strong enough to support the weight of the u

Summary of the content on the page No. 4

RECOMMENDED HEIGHT AND LENGTH (MAXIMUM PIPING LENGTH If the refrigerant piping is longer than the & HEIGHT RECOMMENDED) recommended length, or if the height difference between the indoor and outdoor Piping length (feet) Notes unit is greater than recommended, the 23 50 capacity will drop and the compressor could Unit Cooling Installation malfunction. Select an installation location Piping capacity not Add Not Needed Diameter that is within the recommended parameters. 7,500 to recom- ch

Summary of the content on the page No. 5

MOUNTING INSTALLATION PLATE: The fan coil can be installed using any of the four methods described below. Determine which is the most suitable method. Position the installation plate on the wall making sure that it is parallel to the ground. This can be done by aligning the marking- off line with a thread and weight as shown in figure on the right. This is to ensure that the condensate water does not overflow from the drain pan. Mount the installation plate with the 4 screws provided.

Summary of the content on the page No. 6

INSTALLATION OF FAN COIL: The extended liquid and suction pipes and drain hose are hidden inside a slot at the back of the fan coil. This allows the hole on the wall to be either on the right or left side of the fan coil. RIGHT SIDE HOLE POSITION: The piping and drain hose are routed straight through the hole. LEFT SIDE HOLE POSITION: The piping and drain hose run from the right side to the left side of the unit, hidden in the slot at the back of the unit before routing through the hole

Summary of the content on the page No. 7

REFRIGERATION PIPING & DRAINAGE PREPARATION OF PIPING Fan coil and side discharge condensing units are equipped with flare connections. Improper flaring and brazing may cause refrigerant to leak out of the system. Follow these instructions carefully in preparing the refrigerant piping. ! Ensure that all piping is of the correct size. ! Measure the distance between the indoor and outdoor units' refrigerant connections, together with all the curves necessary. Add a few inches as slack. ! Lay

Summary of the content on the page No. 8

PIPING INSULATION Insulation Liquid and suction lines must be insulated separately. In a cooling only type air conditioner, both pipes become cold during operation. This can cause moisture to Narrow Pipe Wide Pipe condense on the surface of the pipes, Common insulation resulting in heat loss. Separate insulation is essential PRECAUTIONS WHEN BENDING PIPES ! The air conditioner's performance will suffer if the piping is crushed. ! Bend pipes using the pads of your thumbs to prevent the

Summary of the content on the page No. 9

(c) PRECAUTIONS WHEN CONNECTING PIPES: Connections will go more smoothly if the First, 2 or 3 turns by hand large pipe is connected first, followed by the small pipe. Hold the nipple and the flare nut straight and lightly turn the nut two or three turns by hand to ensure that the threads are aligned. Nipple Flair nut Then tighten to the specified torque using a wrench. In particular, when tightening 1/4" diameter flare nuts, use the specified torque wrench Always look at arrow on

Summary of the content on the page No. 10

AIR PURGING This procedure is used to remove air from inside the piping connecting the indoor and outdoor units, as well as the air inside the indoor unit. If air purging is not carried out, air will beocme mixed into the refrigerant cycle, causing the pressure to rise to abnormally high levels, increasing power consumption and reducing the capacity of the unit. Also, moisture in the air can cause insulation failure in the compressor motor and deterioration of the refrigerant oil, resultin

Summary of the content on the page No. 11

DRAIN PIPE CONNECTION The fan coil is equipped with a drain hose. It is tied together with the refrigerant piping. During Downward Slant installation, it is important to observe the following Down- instructions to prevent water overflowing from the ward slant drain pan. Drain Pipe Drain Pipe ! Insure that the indoor unit is level and not tilted forwards or backwards. • Traps The lack of a ! Insure that the drain hose does not rise downward Trap above the drain pan. It should be sloping s

Summary of the content on the page No. 12

Outdoor unit Holder for Control board connecting cable cover ELECTRICAL WIRING to power supply LOCATION OF TERMINAL BLOCK: The terminal block on the indoor unit is located Holder to next to the PCB. Cable access is through the power supply cord back of the unit. For the condensing unit, the terminal block is located behind the control panel. connecting cable WIRING CONNECTION: ! All wiring and grounding must comply with the local Electric Codes. ! See the unit nameplate for electrical ratin

Summary of the content on the page No. 13

OPERATING INSTRUCTIONS OPERATING TIPS: Observe the following points for economical and safe operation: ! Keep the room temperature at a comfortable level. Too much cooling is unhealthy and results in excessive consumption of electricity. A temperature setting of 75°F (24°C) is usually sufficient during the day. During the night, set the temperature a few degrees higher as the body temperature is reduced when a person is asleep. ! Adjust the vertical and horizontal louvers to provide unifo

Summary of the content on the page No. 14

AUXILIARY CONTROL Figure below illustrates the auxiliary control on the fan coil. This can be used to operate / control the air conditioner when the remote controller is not available or lost. Test Use to operate the air conditioner under "COOL" mode. All other functions will not be effective. The air conditioner will automatically stop operating after 30 minutes. This is to test if the air conditioner is in working condition. Remote In this position, the air conditioner is controlled by

Summary of the content on the page No. 15

REMOTE CONTROL OPERATION CONTROLS AND INDICATORS Figure below illustrates the various controls and indicators of the LCD wireless remote control. MODEL: AMW 25, 30

Summary of the content on the page No. 16

MODEL: AMW 45, 60

Summary of the content on the page No. 17

OPERATING INSTRUCTIONS Before operating the unit for the first time, it is necessary to install the batteries in the remote controller. ! Batteries are located at the back of the remote controller (Model AMW25, 30) and at the front of the remote controller (Model AMW45, 60). ! Open the battery holder by simultaneously pushing downwards and inwards at the area marked "OPEN" ! Use only "AAA" alkaline batteries ! Dispose of used batteries correctly, in a manner not causing pollution or harm

Summary of the content on the page No. 18

MODEL: AMW 45, 60 ! Start air conditioner. Point the remote controller at the fan coil and press "ON/OFF" button. ! Select operation mode. Press "Mode" button to select any of the following modes: "Cool", "Dry" or "Vent". ! Temperature setting. Press "+" or "-" button to set desired temperature. ! Select fan speed. Press "Fan control" button to select desired fan speed. ! Select airflow direction. Press "Louver control" button to set position of horizontal vane or set it to auto swing. !

Summary of the content on the page No. 19

CARE AND MAINTENANCE ! The air conditioner requires proper care and maintenance for efficient operation. A periodic inspection and cleaning may be available from your dealer or distributor. Be sure to ask about this service at the time of installation. The user can also perform some of the care and maintenance. Please follow these instructions. ! Be sure to disconnect the power supply before undertaking any inspection. ! Open the RETURN AIR GRILLE and remove the air filters. Clean by wa

Summary of the content on the page No. 20

TROUBLE SHOOTING The following are normal and should not be treated as defects. ! Hissing sound, like flow of water from the unit. This is the sound of the refrigerant at the expansion device, which can be heard from time to time depending on the indoor and outdoor ambient conditions. ! The unit does not cool for a few minutes after it restarts. This is because a time delay mechanism built into the unit prevents the compressor from starting for a few minutes. This is to protect the compre


Alternative user manuals
# User manual Category Download
1 Philips 190S5 User manual Air Conditioner 21
2 Philips Comfort-Cire AMC 30 User manual Air Conditioner 2
3 Philips CS-E15DB4EW User manual Air Conditioner 4
4 Philips GOGEAR SA3425 User manual Air Conditioner 1
5 Philips 3160 User manual Air Conditioner 7
6 Philips Comfort-Cire AMW User manual Air Conditioner 3
7 Philips Comfort-Cire AMC 25 User manual Air Conditioner 2
8 Philips GoGear SA3446 User manual Air Conditioner 0
9 Philips RAC-18C9 User manual Air Conditioner 4
10 Philips Comfort-Cire AMC 60 User manual Air Conditioner 1
11 Philips GoGear SA3485 User manual Air Conditioner 0
12 Philips Comfort-Cire AMC Series User manual Air Conditioner 1
13 Philips GoGear SA3445 User manual Air Conditioner 1
14 Philips RAC-X18CX User manual Air Conditioner 2
15 Philips RAS-X18CX User manual Air Conditioner 2
16 Sony SU-PW2 User manual Air Conditioner 12
17 Sony CV-P12PX User manual Air Conditioner 3
18 Sony MULTI CHANNEL AV RECEIVER STR-DG710 User manual Air Conditioner 31
19 Sony VGN-BX500 User manual Air Conditioner 1
20 Philips 190S5 User manual Air Conditioner 21