Chamberlain 1000SDR 1/3 HP user manual

User manual for the device Chamberlain 1000SDR 1/3 HP

Device: Chamberlain 1000SDR 1/3 HP
Category: Garage Door Opener
Manufacturer: Chamberlain
Size: 1.02 MB
Added : 11/10/2013
Number of pages: 36
Print the manual

Download

How to use this site?

Our goal is to provide you with a quick access to the content of the user manual for Chamberlain 1000SDR 1/3 HP. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Chamberlain 1000SDR 1/3 HP.

For your convenience

If looking through the Chamberlain 1000SDR 1/3 HP user manual directly on this website is not convenient for you, there are two possible solutions:

  • Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Chamberlain 1000SDR 1/3 HP on full screen, use the button Fullscreen.
  • Downloading to your computer - You can also download the user manual Chamberlain 1000SDR 1/3 HP to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Chamberlain 1000SDR 1/3 HP User manual - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Print version

Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Chamberlain 1000SDR 1/3 HP but the selected pages only. paper.

Summaries

Below you will find previews of the content of the user manuals presented on the following pages to Chamberlain 1000SDR 1/3 HP. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.

Abstracts of contents
Summary of the content on the page No. 1

The Chamberlain Group, Inc.
A DUCHOSSOIS ENTERPRISE
TM
845 Larch Avenue
Elmhurst, Illinois 60126-1196
Complies with UL 325
regulations effective
January 1, 1993
®
Garage Door Opener
Model 2000SDR
Model 1000SDR
1/2 HP
1/3 HP
For Residential Use Only
n Please read this manual and the enclosed safety materials carefully!
n Fasten the manual near the garage door after installation.
®
n The door WILL NOT CLOSE unless the Protector System is connected and properly
aligned.
n Periodic checks of the op

Summary of the content on the page No. 2

Contents Safety alert symbol review............................................2 Install the lights and lens ..........................................19 Safety information and precautions ..............................3 Attach the manual release rope and handle...............19 Testing your garage door for binding & balance ..........3 Fasten the door bracket (sectional door)...................20 Hardware supplied ........................................................3 Fasten the door b

Summary of the content on the page No. 3

Safety Information and Precautions CAUTION CAUTION WARNING An unbalanced garage door might not reverse when To avoid damage to the garage door and opener, disable required and someone under the door could be seriously locks before installing and operating the opener. Use a injured or killed. wood screw or nail to hold locks in the "open" (unlocked) position. If your garage door binds, sticks or is out of balance, call for professional garage door service. Garage doors, door Operation at other th

Summary of the content on the page No. 4

Carton Inventory Your garage door opener is packaged in two cartons which contain the power unit and parts illustrated below. Accessories will depend on model purchased. If anything is missing, carefully check the packing material. Parts may be "stuck" in the foam. KEEP THE FOAM INTACT (see page 6). Hardware is listed on page 3. Model 2000SDR Model 1000SDR Model 2000SDR Model 1000SDR SECURITY✚ SECURITY✚ 3-Channel Remote Control Single-Function Remote Control Multi-Function Lighted Door Control

Summary of the content on the page No. 5

— — — — — — — — Before you begin, survey your garage area to see whether any of the conditions below apply to your installation. SECTIONAL Door or ONE-PIECE Door with Track Installation FINISHED CEILING Support bracket & fastening hardware is required. Horizontal and vertical reinforcement See page 13. is needed for lightweight garage doors (fiberglass, steel, aluminum, door with glass panels, etc.). See page 20 for details. Header Wall Extension Spring OR OR One-Piece Door-Ext

Summary of the content on the page No. 6

Assembly Section: Pages 6 - 7 ASSEMBLY STEP 1 Fasten the Rail To the Power Unit The Chamberlain Group, Inc. Screw Drive LM 114A1794 NOTE: To aid in assembly and installation, replace Attaching Rail Assembly & Coupling to Chassis the foam packing around the power unit. Remove it 6/9/94 - 6/18/94 - 10/19/9 after Installation Step 5. 12/7/94 • Working on a level surface, align the rail assembly with the power unit, as shown. Power Unit Rail/Power Unit • Slip the coupling over the rail s

Summary of the content on the page No. 7

ASSEMBLY STEP 3 Attach the Rail Brackets 1/4"-20 Rail Lock Nuts • Align rail brackets to end of rail assembly, as shown. Brackets • Insert two 1/4"-20 x 5/8" hex screws and lock nuts. Tighten securely with a 7/16" socket. Hardware Shown Actual Size 1/4" - 20 1/4"-20x5/8 Rail 1/4" - 20 x 5/8" Lock Nut Hex Hex Screw Screws You have now finished assembling your garage door opener. Please read the following warnings before proceeding to the installation section: IMPORTANT INSTALLATION INSTRUCTIO

Summary of the content on the page No. 8

Installation Section: Pages 8 – 23 SECTIONAL DOOR AND The Chamberlain Group, Inc. Installation Step 1 WARN ONE-PIECE DOOR WITH TRACK ING WARNING Position Header Bracket SECTIONAL DOOR AND Determine Header Bracket Location Sectional and One-Piece Track Installations If the header bracket is not rigidly fastened to a Installation procedures vary according to garage ONE-PIECE DOOR WITH TRACK structural support on the header wall or ceiling, the door types. Follow the instructions which ap

Summary of the content on the page No. 9

ONE-PIECE Door Without Track Read the Safety Instructions on page 8. They also apply to doors without tracks. Unfinished • Close the door and mark the inside Header Wall Ceiling Vertical vertical centerline of your garage Centerline 2x4 door. Extend the line onto the header wall above door. Structural Supports If headroom clearance is minimal, you can install the header bracket on the ceiling. See page 10. • If you need to install the header 2x4 bracket on a 2x4 (on wall or Vertical Header Suppo

Summary of the content on the page No. 10

You can attach the header bracket either to the wall Installation Step 2 above the garage door, or to the ceiling. Follow the instructions which will work best for your particular Install the Header Bracket requirements. Fastening the Header Bracket to the Ceiling Fastening the Header Bracket to the Wall • Center the bracket on the vertical guideline with the • Extend the vertical guideline onto the ceiling as shown. bottom edge of the bracket on the horizontal line as • Center the bracket

Summary of the content on the page No. 11

Installation Step 3 Attach the Rail to the Header Bracket • Position the opener on the garage floor below the header bracket. Use packing material as a protective base. If the door spring is in the way you’ll need help. Have someone hold the opener securely on a temporary support to allow the rail to clear the spring. • Position the rail bracket against the header bracket. • Align the bracket holes and join with a clevis pin as shown. • Insert a ring fastener to secure. Header Wall Header Br

Summary of the content on the page No. 12

® The Protector System IMPORTANT INFORMATION ABOUT THE SAFETY REVERSING SENSOR WARNING The safety reversing sensor must be connected and Without a properly working safety reversing sensor, aligned correctly before the garage door opener will persons (particularly children) could be injured or killed move in the down direction. This is a required safety by a closing garage door. Read and follow all device and cannot be disabled. instructions. To protect small children, install the safety reversi

Summary of the content on the page No. 13

Installation Step 4 Install the Safety Reversing Sensor (Receiving and Sending Eyes) Installing the Brackets DOOR TRACK MOUNT (Right Side) Figure 1 Be sure power to the opener is disconnected. Install and align the brackets so the sensors will face each other Door across the garage door, with the beam from 4 – 6" above Track the floor. Lip They may be installed in one of three ways, as follows. Indicator light Garage door track installation (preferred): • Slip the curved arms over the rounded

Summary of the content on the page No. 14

Installation Step 4 (Continued) Install the Safety Reversing Sensor Mounting and Wiring the Safety Sensors Figure 4 • Slide a 1/4"-20x1/2" carriage bolt head into the slot on both sensors. Use wing nuts to fasten sensors to Wing nut brackets, with lenses pointing toward each other across the door. Be sure the lens is not obstructed by a bracket extension. See Figure 4. 1/4"-20x1/2" • Finger tighten the wing nuts. Carriage bolt Lens Recommended Wire Routing 1. Using insulated staples, run the wir

Summary of the content on the page No. 15

NOTICE WARNING WARNING The Chamberlain Group, Inc. The Chamberlain Group, Inc. Step 3 Position Opener Chassis The Chamberlain Group, Inc. Manual Disconnect 114A1794 Lift-Master One Piece Rail Step 3 Position Opener Chassis Liftmaster Screw Drive #114A1794 5/9/94 - 6/1/94, 6/8/94 - 10/20/94 114A1794 Lift-Master One Piece Rail 6/2/94, 6/15 5/9/94 - 6/1/94, 6/8/94 - 10/20/94 Installation Step 5 CAUTION Position the Opener Follow instructions which apply to your door To preve

Summary of the content on the page No. 16

Installation Step 6 WARNING Hang the Opener The opener could fall and injure someone if it is not properly secured. Fasten the opener securely to structural supports of the garage. Two representative installations are shown. Yours may be different. Hanging brackets should be angled, Figure 1, to provide rigid support. On finished ceilings, Figure 2, attach a sturdy metal bracket to structural Figure 1 supports before installing the opener. The bracket and fastening hardware are not supplied. Str

Summary of the content on the page No. 17

1 1 LIGHT LIGHT Installation Step 7 WARNING WARNING Install the Door Control and Connect all Wiring DO NOT CONNECT TO LIVE ELECTRICAL WIRING. CONNECT ONLY TO 24 VOLT LOW VOLTAGE WIRES. CONNECTION TO LIVE WIRES OR HIGHER VOLTAGE MAY CAUSE SERIOUS Locate the door control within sight of the door at a minimum INJURY FROM SHOCK, BURN OR ELECTROCUTION. height of 5 feet where small children cannot reach, and away Children operating or playing with a garage door opener can from all moving parts of the

Summary of the content on the page No. 18

Installation Step 8 WARNING Electrical Requirements To prevent electrocution or fire, installation and wiring must be in compliance with local electrical and building To reduce the risk of electric shock, your garage door codes. opener has a grounding type plug with a third grounding Do NOT use an extension cord, 2-wire adapter, or change pin. This plug will only fit into a grounding type outlet. the plug in any way to make it fit your outlet. If the plug doesn't fit into the outlet you have, co

Summary of the content on the page No. 19

CONTROL CENTER NOTICE Installation Step 10 Install the Lights and Lens 100 Watt Max. Light Bulb • Install a 100 watt maximum light bulb in each socket. The lights will turn ON and remain lit for approximately 4-1/2 minutes when power is connected. Top Lens Slot Then the lights will turn OFF. • Insert bottom lens tabs into slots on chassis and tilt Top Lens Tab towards chassis to engage top tabs, then drop down gently into place. (See illustration.) • To remove, lift lens up and gently tilt sl

Summary of the content on the page No. 20

Installation Step 12 CAUTION CAUTION Fasten Door Bracket Follow instructions which apply to your door type To prevent damage to steel, aluminum, fiberglass or as illustrated below or on page 21. glass panel doors, always reinforce the inside of the door both vertically and horizontally with an angle iron. A horizontal brace should be long enough to be secured to 2 vertical supports. A vertical brace should cover the height of the top panel. The illustration shows one piece of angle iron as the


Alternative user manuals
# User manual Category Download
1 Chamberlain 1000E - 1/4 HP User manual Garage Door Opener 188
2 Chamberlain 1000SDC 1/3HP User manual Garage Door Opener 30
3 Chamberlain 1140 User manual Garage Door Opener 17
4 Chamberlain 1025 User manual Garage Door Opener 18
5 Chamberlain 1000SDC-R, 2000SDC-R User manual Garage Door Opener 3
6 Chamberlain 1022 User manual Garage Door Opener 11
7 Chamberlain 1042 User manual Garage Door Opener 2
8 Chamberlain 1146 User manual Garage Door Opener 1
9 Chamberlain 1024 User manual Garage Door Opener 3
10 Chamberlain 1145-1/3HP User manual Garage Door Opener 1
11 Chamberlain 1145 User manual Garage Door Opener 2
12 Chamberlain 1145- 1/3HP User manual Garage Door Opener 1
13 Chamberlain 1145jg User manual Garage Door Opener 3
14 Chamberlain 1150 User manual Garage Door Opener 4
15 Chamberlain 1150- 1/3HP User manual Garage Door Opener 3
16 Sony Remote Commander RM-V111T User manual Garage Door Opener 50
17 Sony RM-B750 User manual Garage Door Opener 22
18 Sony RCP 920 User manual Garage Door Opener 5
19 Aspire Digital ASPIRE RF RFKGT User manual Garage Door Opener 0
20 Aiphone IS-SS-HID-I User manual Garage Door Opener 0