Dynalink A 0977A user manual

Summary of the content on the page No. 1

A 0977A
Learning Jumbo Remote
Operating Instructions
Congratulations on purchasing the A 0977A 4 in 1Jumbo remote control. The unit can
program a range of devices including TVs, Set top boxes, DVDs, amplifiers, VCRs, PVRs,
CDs, etc. For the full range of compatible devices refer to the device code listing enclosed
with this product.
The remote control has 4 labelled device keys. These are TV, STB (Set top box), DVD and
AUX (Auxiliary). However, any type of device can be programmed into any butt

Summary of the content on the page No. 2

B. Using Code manual search. 1. Press and hold the device key button you want to program (eg TV, STB etc) for 3 seconds until the LED indicator remains illuminated. 2. Release the device key. 3. Turn on device (eg TV) using your existing remote. 4. Face the remote control to the appliance. Press and release the “left” or “right” button. Each pressing of the button sends a different “Off” command to the appliance. Repeat this action until the TV powers Off. 5. Press the OK button. C. Using Auto C

Summary of the content on the page No. 3

KEY TV SAT DVD VCR AUX DENON KENWOOD SONY 1 SONY SONY ONKYO DENON KENWOOD PANASONIC PANASONIC PANASONIC PANASONIC PANASONIC 2 HITACHI HITACHI HITACHI HITACHI HITACHI NEC NEC NEC NEC NEC 3 TOSHIBA TOsHIBA TOSHIBA TOSHIBA TOSHIBA PIONEER PIONEER PIONEER PIONEER PIONEER SHARP SHARP SHARP SHARP SHARP 4 SANYO SANYO SANYO SANYO SANYO MITSUBISHI MITSUBISHI MITSUBISHI MITSUBISHI MITSUBISHI JVC JVC JVC JVC JVC 5 AKAI AKAI AKAI AKAI AKAI FUJITSU FUJITSU SAMSUNG SAMSUNG SAMSUNG SAMSUNG SAMSUNG 6 LG LG LG L

Summary of the content on the page No. 4

E. Using TV quick search (For TV programming). 1. Press TV device key and release. 2. Turn on TV using your existing remote. 3. Press and hold “MUTE” button. After 3 seconds it will begin searching. Every second it will send 15 codes to the TV. The LED indicator will flash fast indicating it is sending the codes. 4. When the TV displays MUTE , release the mute button. The LED indicator will now flash twice every 2 seconds. 5. When the TV displays “VOL” quickly press the “OK” button to save the c

Summary of the content on the page No. 5

are received within 15 seconds, the unit will exit learning mode. NOTE 3. Except LEARN and device buttons, any button can be programmed, and programmed more than once. The unit will retain the last code programmed. To delete any programmed buttons 1.Press the device key. 2.Press and hold the learn button, then press the device button you wish to clear. After 2 seconds. The LED indicator will flash 3 times signifying the data has been deleted. To delete all the data in a device key Press and hold