Summary of the content on the page No. 1
3-280-325-12 (1)
Wireless Stereo
Headset
Operating Instructions
DR-BT21iK
© 2007 Sony Corporation
DR-BT21iK [GB] 3-280-325-12(1)
Summary of the content on the page No. 2
iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries. WARNING The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any To reduce the risk of fire or use of such marks by Sony Corporation is under license. electric shock, do not expose this Other trademarks and trade names are those apparatus to rain or moisture. of their respective owners. To reduce the risk of electrical MPEG Layer-3 audio coding technology and shock, do not open
Summary of the content on the page No. 3
Disposal of waste CompatibleiPodmodels batteries (applicable in the European Union and The compatible iPod models are as other European countries follows. Update your iPod to use with separate collection the latest software before you use it. systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. iPod nano By ensuring these batteries are disposed of 3rd generation correctly, you will help pre
Summary of the content on the page No. 4
DR-BT21iK [GB] 3-280-325-12(1) DR-BT21iK [GB] 3-280-325-12(1)
Summary of the content on the page No. 5
Calling with headset ..............28 Preparation for calling Table of Contents (Bluetooth connection) ...........28 To receive a call.............................30 What is Bluetooth wireless To call ...............................................30 technology? ........................... 6 To terminate a call .......................30 Features ..................................... 7 Controlling the Bluetooth mobile phone – HFP, HSP........31 Getting Started Calling while playing back Check
Summary of the content on the page No. 6
What is Bluetooth wireless technology? TM Bluetooth wireless technology Communication System: is a short-range wireless Bluetooth Specification version technology that enables wireless 2.0 data communication between Compatible Bluetooth Profile: digital devices, such as a – A2DP (Advanced Audio computer or digital camera. Distribution Profile) Bluetooth wireless technology – AVRCP (Audio/Video operates within a range of about Remote Control Profile) 10 meters (about 30 feet). (The follo
Summary of the content on the page No. 7
Features This product is an audio kit comprising of a transmitter and headset using Bluetooth wireless technology. You can enjoy music wirelessly by transmitting the audio signals to a headset by connecting the Bluetooth transmitter to iPod (see page 3 for compatible iPod models) with the iPod connector* (30 pin). * iPod connector is a dedicated multiple connector for connecting accessories to your iPod. This product’s features are as follows: Wireless headset and transmitter for streamin
Summary of the content on the page No. 8
Getting Started Checking supplied items Bluetooth headset DR-BT21G (1)
=> Bluetooth transmitter TMR-BT8iP (1)
=> AC power adaptor (1)
=>
=> Operating Instructions (this book) (1)
=> Warranty Card (1) DR-BT21iK [GB] 3-280-325-12(1)
Summary of the content on the page No. 9
Location and Function of Parts Bluetooth headset Headset indicator (blue) RESET button Indicates the Push this button when communication status of the headset does not the headset. operate properly. Pairing information is not deleted Headset indicator (red) by this operation. Indicates the power status VOL (volume) +*⁄– of the headset. buttons Multi function button Controls various functions Neckband when calling with a headset Left housing by combining with a Bluet
Summary of the content on the page No. 10
Bluetooth transmitter iPod connector (0 pin) Power button Connects to the dock Performs the following: connector of an iPod • Turning on/off of the (page 16). transmitter (page 16). • Pairing (page 21). Transmitter indicator • Initializing the Indicates the transmitter’s transmitter (page 38). status (page 23). Hereafter, “Bluetooth headset” is abbreviated as “headset,” and “Bluetooth transmitter” as “transmitter.” 10 DR-BT21iK [GB] 3-280-325-12(1) DR-BT21iK [GB] 3-280-325-12(1)
Summary of the content on the page No. 11
Basic use of headset Charging the headset The headset contains a rechargeable Lithium-Ion battery, which should be charged before using for the first time. 1 Connect the supplied AC power adaptor to the DC IN 3 V jack on the headset. To an AC outlet Bluetooth headset To DC IN 3 V jack AC power adaptor (supplied) When the AC power adaptor is connected to an AC outlet, charging starts. Tips
=> If the AC power adaptor is connected to an AC outlet while the headset is turned on, the headset wil
Summary of the content on the page No. 12
Caution If the headset detects a problem while charging, the headset indicator (red) may turn off, although charging is not complete. Check for the following causes: – Ambient temperature exceeds the range of 0 °C – 40 °C (32 °F – 104 °F). – There is a problem with the battery. In this case, charge again within the above-mentioned temperature range. If the problem persists, consult your nearest Sony dealer. Notes
=> If the battery is not used for a long time, battery may be quickly depleted, ho
Summary of the content on the page No. 13
Checking the remaining battery When pressing the POWER button while the headset is turned on, the headset indicator (red) flashes. You can check the remaining battery by the number of times the headset indicator (red) flashes. Headset Indicator (red) Status 3 times Full 2 times Mid 1 time Low (needs to charge) Note You cannot check the remaining battery immediately after the headset is turned on, or while pairing. When the battery is almost empty The headset indicator (red) flashes slowly aut
Summary of the content on the page No. 14
Folding Unfolding 1 Hold near the foldable part 1 Unfold the left and right with both hands and lift up neckband as illustrated. the left housing to fold it as illustrated. Fold the right housing in the same manner. 2 Lift up and open up the remaining half of the neckband. 2 Close the folded left and right neckband. Notes
=> Do not pull open this way.
=> Be careful not to hit your face or eyes with the top of the neckband. 1 DR-BT21iK [GB] 3-280-325-12(1) DR-BT21iK [GB] 3-280-325-12(1
Summary of the content on the page No. 15
Wearing 1 Place the neckband on the neck. The headset with the POWER button is the right housing (for the right ear). 2 Lift up the headset slightly above the ear level, put down the neckband so that it hooks on your ears and put the ear pads on your ears. 3 Adjust the angle and position of the neckband so that the headset is fitted comfortably on your ears. Neckband Left ear Ear pad 1 DR-BT21iK [GB] 3-280-325-12(1) DR-BT21iK [GB] 3-280-325-12(1)
Summary of the content on the page No. 16
Connecting to an iPod Connect the transmitter to the dock connector port of an iPod (see page 3 for compatible iPod models) firmly. Dock connector port (30 pin) Power button To turn on the transmitter 1 Connect the transmitter to the iPod. 2 Press the power button of the transmitter for about 1 second to turn it on, or start to play back on iPod. When the transmitter turns on, the indicator flashes twice. Note If the transmitter cannot turn on, operate the iPod. To turn off the transmitter To
Summary of the content on the page No. 17
Notes To listen to music from the headphone jack of the iPod, disconnect the
=> transmitter from the iPod. While the transmitter is turned on, it consumes power from the iPod. We
=> recommend disconnect the transmitter from iPod when not using the Bluetooth function. If the headphone is connected to the iPod while the iPod is playing back, it
=> consumes power from iPod. If you turn off the transmitter while the iPod is playing back, iPod will power off.
=> It is not recommended to turn off
Summary of the content on the page No. 18
Operating Listening to music of the iPod You can listen to music of the iPod (see page 3 for compatible iPod models) on the headset. 1 Press and hold the POWER button on the headset for about 3 seconds. The headset indicator (blue) and headset indicator (red) flash together twice and the headset is turned on. 2 Connect the transmitter to the iPod then turn on the iPod and start playback on the iPod. The transmitter indicator status will vary as follows, and the Bluetooth connection between
Summary of the content on the page No. 19
Tip You can control the volume on the headset. (The volume of the iPod is not changed.) You can also fast-forward or fast-rewind while playing back (page 20). Notes Even if you control the volume on the iPod, sound from the headset will not
=> change. If the transmitter and the headset become out of range and the Bluetooth
=> connection terminates, repeat the procedure from step 1. Playback through a Bluetooth connection may cause noise, sound break, or
=> playback speed change depending
Summary of the content on the page No. 20
Controlling an iPod with the headset You can control an iPod (see page 3 for compatible iPod models) using the control button of the headset. Before starting remote control operation, check that step 1 and 2 of “Listening to music of the iPod” are completed (page 1). Transmitter Remote control Bluetooth headset (playback, pause, etc.) Control for the iPod You can playback or pause the iPod by pressing the button on the headset. You can turn off the iPod and transmitter by pressing and
