Summary of the content on the page No. 1
BTSHS01
Bluetooth
Stereo Headset
User Manual
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Contents BTSHS01 User Manual 1. Before Starting........................................................................................................... 2 2. Product Introduction............................................................................................... 3 2.1 Features................................................................................................ 3 2.2 Package Contents..............................................................................3 2.3 Hard
Summary of the content on the page No. 4
Before starting BTSHS01 User Manual 1 2 1. For the first time using, it takes 4 hours to fully charge the batteries and 2 hours afterwards. After the batteries were fully charged, talking time is up to 8 hours and the standby time is up to 160 hours. For further information, please refer to the Battery Charging chapter in this manual. 2. The product configurations are based on Bluetooth stereo adapter and mobile phone. For other Bluetooth devices, please refer to the brand manuals. 3. Whe
Summary of the content on the page No. 5
Product Introduction BTSHS01 User Manual 2 corega BTSHS01 is a Bluetooth 1.2 standard headset, with the included Bluetooth audio adapter, it can be used on any audio device which has a 3.5mm audio output, such as personal stereo, TV, DVD player, MP3 player and iPOD etc.. This headset is also compatible with Bluetooth mobile phones. It sup- ports auto music/phone switching function, so you will not miss out any phone call while you are listening music. The simple black-white design of CG-BT
Summary of the content on the page No. 6
. . . e . e e e . e e e . e e . e . e e e BTSHS01 User Manual 2.3 Hardware Description [Right] [Left] Pairing Track Wheel Button Microphone Charging Port Play/Pause/Answer Volume Button /Hang-up Button [Front view] Power Switch/Pairing Button Charging Port 2.4 Product Configuration Mobile Phones CD Player with BTSAP01 Bluetooth Audio Adapter MP3 Player with BTSAP01 Bluetooth Audio Adapter BTSHS01 Bluetooth Stereo Headset Laptop with BTSAP01 Blueto
Summary of the content on the page No. 7
BTSHS01 User Manual 2.5 LED Description X: OFF : BLINKING O: ON LED LED1: RED LED2: BLUE Power On X Standby X Pairing Pairing Successfully X Working X Incoming Call X Talking X Low Battery X X Charging O X Charged Done X X 4 5
Summary of the content on the page No. 8
Charging Batteries BTSHS01 User Manual 3 For the first time using, it takes 4 hours to fully charge the batteries and 2 hours afterwards. After the batteries were fully charged, talking time is up to 8 hours and the standby time is up to 160 hours. (* Various usage patterns may adversely affect battery performance) The following figure is the Battery Charging instructions: 1. Connect the T-Connector to the power adapter 2. Connect the stereo headset to the T-Connector 3. Connect the stereo ad
Summary of the content on the page No. 9
Start Using BTSHS01 User Manual 4 The followings are pairing modes and sequences for the stereo headset: 4.1 Headset ---> Stereo adapter (Pairing --->) 4.2 Headset ---> Mobile phone 4.3 Headset ---> Stereo adapter then Headset ---> Mobile phone 4.4 Headset ---> Other Bluetooth devices 4.1 Use with audio devices (1) Power On Use the power switch to turn on the power. *Note: Turn the switch to [OFF] to switch off the headset. (2) 3.5mm audio connector Plug the audio connector into the 3.5mm
Summary of the content on the page No. 10
BTSHS01 User Manual (3) Pairing a. When Power is On, press and hold the pairing track wheel on the stereo headset until the blue and red LEDs flash alternatively. b. When Power is Off, press and hold the control button on the stereo adapter until the blue and red LEDs flash alternatively. c. When both headset and stereo adapter’s Blue LEDs start to flash three times, then the pairing is completed. *Note: 1. If pairing is unsuccessful, the stereo adapter has to be switched off then repeat the
Summary of the content on the page No. 11
BTSHS01 User Manual (5) Adjusting Volume 1. Adjusting Headset Volume Press [Vol.+] to increase the volume, [Vol.-] to decrease the volume. V o l + V o l - *Note: It is recommended to adjust headset volume once the pairing is completed, since default volume may be slightly quiet. 2. Set volume mode 《Normal volume mode》 - When power is on, press and hold the control buttons on the stereo adapter for 1.5 seconds to disconnect the stereo adapter from the audio device. Then you will hear
Summary of the content on the page No. 12
BTSHS01 User Manual 《High volume mode》 - When power is on, press and hold the control buttons on the stereo adapter for 1.5 seconds to disconnect the stereo adapter from the audio device. Then you will hear a ‘DoDo’ sound from the headset. - Double clink on the control button will reconnect the stereo adapter to the audio device ans set the stereo headset to high volume mode. 1 . 5 s e c o n d e s D o u ble cl i ck *Note: - For iPOD, normal mode is preferred. - For Sony PSP or Creative MP3 pl
Summary of the content on the page No. 13
BTSHS01 User Manual (2) Pairing a. Press and hold the pairing/track wheel button on the stereo head- set until blue and red LEDs are flashing. b. To properly perform pairing procedure on your mobile phone, please refer to the manual of your mobile phone for its own pairing instruction. This device name is set to be [CG-BTSHS01]. If you are asked to enter pin-code during pairing, please enter [1234]. *Note: 1. If the pairing is unsuccessful, the BLUE LED is then flashing. Please repeat the
Summary of the content on the page No. 14
BTSHS01 User Manual (3) Adjusting Volume 《Adjusting Headset Volume》 Press [Vol.+] to increase the volume, [Vol.-] to decrease the volume. V ol + V ol - (4) Starts Headset phone 《Make a call》 - Dial out the number from your mobile phone. - Voice is automatically transferred to the headset. 《Receive a call/End a call》 - When there is an incoming call, a ‘DoDo’ sound is appeared from headset. Press the answer button to answer the call and the audio channel will be switched to the mobile phone. -
Summary of the content on the page No. 15
BTSHS01 User Manual 《Reject a call 》 - Press and hold the Vol- button of the headset for around 3 seconds. (This function may not work on some Bluetooth mobile phones) 4.3 Use with stereo adapter and phone The pairing sequence is: 1. Headset with Stereo Adapter 2. Headset with Bluetooth mobile phone 4.4 Use with other Bluetooth Devices This headset can also connect with other Bluetooth devices, such as USB Bluetooth dongle, Bluetooth PDA etc.. For the detail configuration, please refer to the
Summary of the content on the page No. 16
BTSHS01 User Manual (4) Start pairing a. Double clicks on the icon, like the figure shown below b. Press and hold the black track wheel button on the headset until RED and BLUE LEDs are flashing alternatively. Double clicks on the icon below: c. Then a message box is pop up from right bottom corner, please click on the message box. 14 15
Summary of the content on the page No. 17
BTSHS01 User Manual d. When the password request box is shown, please enter the pass- word [1234]. Then the pairing is completed. *Note: If the pairing is unsuccessful, the BLUE LED is then flashing. Please repeat the step 3 and 4 until the pairing is completed. (5) Start using headset 《Adjusting Headset Volume》 Before start using the headset, please adjust the headset volume first. For the detail, please refer to 4.1 (5). * Addition feature: Forward/Backward music track The Bluetooth stereo
Summary of the content on the page No. 18
FAQ BTSHS01 User Manual 5 1. Can I change Bluetooth passkey? No, the Bluetooth is written into the device when it manufactured and cannot be changed. 2. Can I use stereo headset with audio device and mobile phone at same time? Yes, the stereo headset can be used with audio device and mobile phone at same time. However, there could be some compatibility issues on certain brands of models of mobile phones. 3. Can I use stereo headset while it is in charging mode? No, the stereo headset cannot
Summary of the content on the page No. 19
BTSHS01 User Manual 8. When my mobile phone was searching for the headset, why did sev- eral Bluetooth devices appear on my mobile phone? The headset will appear as “CG-BTSHS01” on your mobile phone after having been found by your mobile phone. 9. Why doesn’t the headset work suddenly? 1) The headset may have run out of battery. When it is in low battery, a red LED will start to flash. 2) When this happens, please restart your mobile phone. (It is not necessary to perform Pairing again.) 10
Summary of the content on the page No. 20
Specification BTSHS01 User Manual 6 Standard Bluetooth 1.2 Headset:A2DP, HSP, HFP, AVRCP Bluetooth Profile Stereo Adapter:A2DP Frequency 2.4GHz~2.4835GHz ISM Band RF Output Power 0 dBm(typical) Receiving Sensitivity -80 dBm(typical) Up to 10M (open space) Cover Range * Environmental factors may adversely affect wireless signal range Spectrum FHSS (Frequency Hopping Spread Spectrum) Security Pairing, 128bits Encryption Authentication Talk time: 8 hours Standby time: 160 hours Usage Time *
